Skip to content
CasperH2O edited this page Apr 19, 2022 · 8 revisions

Below instructions are to enable the usage of the Handheld Companion within Cemu.

Precondition:

Configuration:

  • Open the Dolphin application.
  • From the Dolphin menu bar, select "Options", "Controller Settings"
  • From the "Wii Remotes" section, selection "Emulate the Wii's Bluetooth adapter" and press the "Configure" button.
  • Select the "Motion Input" tab, click the "Alternate Input Sources" button.

image

  • Tick the "Enable" box followed by the "Add" button.
  • Use the following information, Description: Controller Service, Server IP Address: 127.0.0.1, Server Port 26760
  • Press the "Add" button.

image

  • The DSU Client Controller Service should now be available from the Device drop down selection on the Wii Remote 1 configuration page.
  • Select the "General and Options" tab and configure/map buttons as desired. Save as a profile in the top right for later convenience.

image

Additional useful information from Dolphin wiki:

The configuration of motion sensors are mostly used on the "Motion Input" tab (since 5.0-11083) and on "Extension Motion Input" tab (since 5.0-11478, visible only when Nunchuk is the currently selected extension) of Emulated Wii Remotes, although nothing prevents you from binding the motion sensor axes in other places as well. By default, the Accelerometer and Gyroscope bindings of the "Motion Input" tab should be already populated with the matching axes from the DSU Server.

If they are blank (e.g. the current controller configuration was created by an older Dolphin version), you can manually assign the corresponding motion axes by right-clicking each binding and picking the corresponding axis on the end of the list or you can simply click on the Default button in the main window (but keep in mind this will reset all bindings in all tabs).

For more instructions see the Dolphin wiki DSU client setup: https://wiki.dolphin-emu.org/index.php?title=DSU_Client

Clone this wiki locally