Commands tr TR

Komutlar

ASF, bot örneklerinin ve sürecin davranışlarını kontrol etmek için kullanılabilecek çeşitli komutları destekler.

Aşağıdaki komutlar çeşitli yollarla bota gönderilebilir:

• Etkileşimli ASF konsolu aracılığıyla
• Steam özel/grup sohbeti aracılığıyla
• IPC arayüzümüz aracılığıyla

ASF etkileşimlerinin komutlar için uygun yetkiye sahip olmanızı gerektirdiğini unutmayın. Daha fazla bilgi için SteamUserPermissions ve SteamOwnerID yapılandırma özelliklerini kontrol edin.

Steam sohbeti aracılığıyla yürütülen komutlar, varsayılan olarak ! olan KomutÖneki genel yapılandırma özelliğinden etkilenir. Bu demek oluyor ki örnek olarak status komutunu ele alırsak, !status yazmanız gerektiği anlamına geliyor(veya kendiniz için belirlediğiniz özel KomutÖnekini kullanarak). KomutÖneki konsol veya IPC kullanılırken zorunlu değildir ve atlanabilir.

---

Etkileşimli konsol

ASF'yi Headless modunda çalıştırmadığınız sürece ASF, etkileşimli konsol desteğine sahiptir. Komut modunu etkinleştirmek için c tuşuna basıp komutunuzu yazmanız ve enter ile onaylamanız yeterlidir.

---

Steam sohbeti

ASF Bot'una verilen komutları Steam sohbeti üzerinden yürütebilirsiniz. Açıkçası doğrudan kendinizle konuşamazsınız, bu nedenle ana hesabınızı hedefleyen komutları yürütmek istiyorsanız en az bir başka bot hesabına ihtiyacınız olacak.

Benzer şekilde, belirli Steam grubunun grup sohbetini de kullanabilirsiniz. Bu seçeneğin SteamMasterClanID uygun şekilde ayarlanması gerektirdiğini unutmayın. Bu durumda bot o grubun sohbetini dinleyecek(ve gerekirse grup sohbetine katılacak). Bu, özel sohbetin aksine özel bir bot hesabı gerektirmediğinden "kendinizle konuşmak" için de kullanılabilir. SteamMasterClanID özelliğini yeni oluşturduğunuz gruba kolayca ayarlayıp daha sonra kendi botunuzun SteamOwnerID veya SteamUserPermissions aracılığıyla kendinize erişim sağlayabilirsiniz. Bu şekilde ASF botu (siz) seçtiğiniz grub sohbetine katılacak ve kendi hesabınızdan komutları dinleyecek. Kendinize komutlar vermek için aynı grup sohbet odasına katılabilirsiniz(sohbet odasına komut göndereceksiniz ve aynı sohbet odasında duran ASF örneği, yalnızca hesabınız oradayken görünse bile bunları alacaktır).

Lütfen grup sohbetine bir komut göndermenin bütün botlara etki edeceğini unutmayın. Grup sohbetinde sizinle birlikte duran botlarınızdan 3'üne X anahtarını aktifleştirin diyorsanız sonuç hepsine özel sohbet ile her birine X anahtarını aktifleştirin sonucuyla aynı olacaktır. Çoğu durumda istediğiniz bu olmayacak ve bunun yerine verilen bot komutunu özel sohbet penceresinde tek bir bota göndermelisiniz. ASF grup sohbetini destekler, birçok durumda olduğu gibi tek botunuzla iletişim için yararlı bir kaynak olabilir ancak orada duran 2 veya daha fazla ASF botu varsa grup sohbetinde neredeyse hiçbir zaman herhangi bir komut yürütmemelisiniz. Burada yazılı olan ASF davranışını tam olarak anlamadığınız sürece sizi dinleyen her bota aynı komutu iletmek istemezseniz.

Ve bu durumda bile, bunun yerine [Bots] sözdizimi ile özel sohbeti kullanmalısınız.

---

IPC

Komutları çalıştırmanın en gelişmiş ve esnek yolu, kullanıcı etkileşimi için mükemmel (ASF-ui) yanı sıra üçüncü taraf araçlar veya komut dosyası oluşturmak için de mükemmel (ASF API), ASF'in IPC modunda çalışması ve IPC arayüzü üzerinden komutu yürüten bir istemci gereklidir.

---

Komutlar

Komut	Erişim	Açıklama
2fa [Bots]	Master	Seçilen botlar için geçici 2FA kodu oluşturur.
2fafinalize [Bots] <ActivationCode>	Master	SMS/e-posta etkinleştirme kodunu kullanarak, seçilen botlar için yeni 2FA giriş bilgileri atama sürecini tamamlar.
2fafinalized [Bots] <ActivationCode>	Master	Imports already-finalized 2FA credentials for given bot instances, using 2FA token for verification.
2fafinalizedforce [Bots]	Master	Imports already-finalized 2FA credentials for given bot instances, skipping 2FA token verification.
2fainit [Bots]	Master	Her iki örnek için de yeni 2FA kimlik bilgileri atama işlemini başlatır.
2fano [Bots]	Master	Belirtilen botlar için 2FA doğrulama gerektiren bütün işlemleri reddeder.
2faok [Bots]	Master	Belirtilen botlar için 2FA doğrulama gerektiren bütün işlemleri kabul eder.
addlicense [Bots] <Licenses>	Operatör	Verilen lisansları aşağıda açıklanan verilen bot örneklerinde etkinleştirir. (yalnızca ücretsiz oyunlar).
balance [Bots]	Master	Verilen bot örneklerinin cüzdan bakiyesini gösterir.
bgr [Bots]	Master	Verilen bot örneklerinin BGR kuyruğu hakkındaki bilgileri yazdırır.
bgrclear [Bots]	Master	Clears BGR queue of given bot instances.
encrypt <encryptionMethod> <stringToEncrypt>	Sahip	Verilen dizeyi sağlanan kriptografik yöntem ile şifreler - daha fazla detay aşağıda.
exit	Sahip	Tüm ASF işlemini durdurur.
farm [Bots]	Master	Kart işleme modülünü verilen bot örnekleri için yeniden başlatır.
fb [Bots]	Master	Her iki durumda da verilen otomatik tarımdan kara listeye alınan uygulamaları listeler.
fbadd [Bots] <AppIDs>	Master	Verilen appID'leri, verilen her iki örneğin otomatik çiftçiliğinden kara listeye alınan uygulamalara ekler.
fbrm [Bots] <AppIDs>	Master	Verilen appID'lerini kara listeye alınan uygulamalardan, verilen her iki örneğin otomatik çiftçiliğinden kaldırır.
fq [Bots]	Master	Her iki durumda da verilen öncelikli çiftçilik kuyruğunu listeler.
fqadd [Bots] <AppIDs>	Master	Adds given appIDs to priority farming queue of given bot instances.
fqrm [Bots] <AppIDs>	Master	Removes given appIDs from farming queue of given bot instances.
hash <hashingMethod> <stringToHash>	Sahip	Generated a hash of the string using provided cryptographic method - further explained below.
help	Aile Paylaşımı	Yardım gösterir (bu sayfanın bağlantısı).
input [Bots] <Type> <Value>	Master	Sets given input type to given value for given bot instances, works only in Headless mode - further explained below.
level [Bots]	Master	Shows Steam account level of given bot instances.
loot [Bots]	Master	Sends all LootableTypes Steam community items of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one).
loot@ [Bots] <AppIDs>	Master	Sends all LootableTypes Steam community items matching given AppIDs of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one). This is the opposite of loot%.
loot% [Bots] <AppIDs>	Master	Sends all LootableTypes Steam community items apart from given AppIDs of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one). This is the opposite of loot@.
loot^ [Bots] <AppID> <ContextID>	Master	Sends all Steam items from given AppID in ContextID of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one).
loot& [Bots] <AppID> <ContextID> <Rarities>	Master	Sends all Steam items from given AppID in ContextID matching given Rarities of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one).
mab [Bots]	Master	Lists apps blacklisted from automatic trading in MatchActively.
mabadd [Bots] <AppIDs>	Master	Adds given appIDs to apps blacklisted from automatic trading in MatchActively.
mabrm [Bots] <AppIDs>	Master	Removes given appIDs from apps blacklisted from automatic trading in MatchActively.
match [Bots]	Master	Special command for ItemsMatcherPlugin which triggers MatchActively routine immediately.
nickname [Bots] <Nickname>	Master	Verilen bot örneklerinin Steam takma adını verilen nickname olarak değiştirir.
owns [Bots] <Games>	Operatör	Checks if given bot instances already own given games, explained below.
pause [Bots]	Operator	Permanently pauses automatic cards farming module of given bot instances. ASF will not attempt to farm current account in this session, unless you manually resume it, or restart the process.
pause~ [Bots]	Aile Paylaşımı	Temporarily pauses automatic cards farming module of given bot instances. Farming will be automatically resumed on the next playing event, or bot disconnect. You can resume farming to unpause it.
pause& [Bots] <Seconds>	Operatör	Temporarily pauses automatic cards farming module of given bot instances for given amount of seconds. After delay, cards farming module is automatically resumed.
play [Bots] <AppIDs,GameName>	Master	Switches to manual farming - launches given AppIDs on given bot instances, optionally also with custom GameName. In order for this feature to work properly, your Steam account must own a valid license to all the AppIDs that you specify here, this includes F2P games as well. Use reset or resume for returning.
points [Bots]	Master	Displays number of points in Steam points shop.
privacy [Bots] <Settings>	Master	Changes Steam privacy settings of given bot instances, to appropriately selected options explained below.
redeem [Bots] <Keys>	Operatör	Redeems given cd-keys or wallet codes on given bot instances.
redeem^ [Bots] <Modes> <Keys>	Operatör	Redeems given cd-keys or wallet codes on given bot instances, using given modes explained below.
redeempoints [Bots] <DefinitionIDs>	Operatör	Redeems Steam points for given assets on given bot instances. By default, only free items are allowed, append ! character at the end of each DefinitionID that you want to redeem unconditionally, even if paid.
reset [Bots]	Master	Resets the playing status back to original (previous) state, the command is used during manual farming with play command.
restart	Sahip	ASF'i yeniden başlatır.
resume [Bots]	Aile Paylaşımı	Resumes automatic farming of given bot instances.
start [Bots]	Master	Verilen bot örneklerini başlatır.
stats	Sahip	Yönetilen bellek kullanımı gibi işlem istatistiklerini yazdırır.
status [Bots]	Aile Paylaşımı	Verilen bot örneklerinin durumunu yazdırır.
std [Bots]	Master	Special command for SteamTokenDumperPlugin which triggers refresh of selected bots and submission of data immediately.
stop [Bots]	Master	Verilen bot örneklerini durdurur.
tb [Bots]	Master	Belirli bot örneklerinin ticaret modülünden kara listeye alınmış kullanıcıları listeler.
tbadd [Bots] <SteamIDs64>	Master	Verilen steamIDs 'leri takas modülünden verilen bot örnekleri için kara listeye ekler.
tbrm [Bots] <SteamIDs64>	Master	Verilen steamIDs 'leri takas modülünden verilen bot örnekleri için kara listeden çıkarır.
transfer [Bots] <TargetBot>	Master	Sends all TransferableTypes Steam community items from given bot instances to target bot instance.
transfer@ [Bots] <AppIDs> <TargetBot>	Master	Sends all TransferableTypes Steam community items matching given AppIDs from given bot instances to target bot instance. This is the opposite of transfer%.
transfer% [Bots] <AppIDs> <TargetBot>	Master	Sends all TransferableTypes Steam community items apart from given AppIDs from given bot instances to target bot instance. This is the opposite of transfer@.
transfer^ [Bots] <AppID> <ContextID> <TargetBot>	Master	Sends all Steam items from given AppID in ContextID of given bot instances to target bot instance.
transfer& [Bots] <AppID> <ContextID> <TargetBot> <Rarities>	Master	Sends all Steam items from given AppID in ContextID matching given Rarities of given bot instances to target bot instance.
unpack [Bots]	Master	Unpacks all booster packs stored in the inventory of given bot instances.
update [Channel]	Sahip	Checks GitHub for new ASF release and updates to it if available. This is normally done automatically every UpdatePeriod. Optional Channel argument specifies the UpdateChannel, if not provided defaults to the one set in global config. Channel can end with ! character, which will force update available on given channel - including a possibility of e.g. downgrading.
updateplugins [Channel] [Plugins]	Sahip	Updates selected plugins. Optional Channel property allows you to pick a different UpdateChannel for plugin updates, if they support multiple ones. Channel can end with ! character, which will force update available on given channel - including a possibility of e.g. downgrading, although exact functionality depends on a particular plugin. When Plugins are not provided, then all plugins considered for automatic updates through PluginsUpdateList and PluginsUpdateMode are updated. If you want to update selected ones, especially those disabled from automatic updates by default, you need to provide Channel as well as Plugins you want to update, then ASF will proceed with updating them regardless of their automatic updates setting.
version	Aile Paylaşımı	ASF sürümünü yazdırır.

---

Notlar

All commands are case-insensitive, but their arguments (such as bot names) are usually case-sensitive.

Arguments follow UNIX philosophy, square brackets [Optional] indicate that given argument is optional, while angle brackets <Mandatory> indicate that given argument is mandatory. You should replace the arguments that you want to declare, such as [Bots] or <Nickname> with actual values that you want to issue the command with, omitting the braces.

[Bots] argument, as indicated by the brackets, is optional in all commands. When specified, command is executed on given bots. When omitted, command is executed on current bot that receives the command (Steam chat), or in according to DefaultBot configured property (IPC and interactive console).

As an example, status A sent to bot B is the same as sending status to bot A, bot B in this case acts only as a proxy. This can also be used for sending commands to bots that are unavailable otherwise, for example starting stopped bots, or executing actions on your main account (that you're using for executing the commands).

Access of the command defines minimum EPermission of SteamUserPermissions that is required to use the command, with an exception of Owner which is SteamOwnerID defined in global configuration file (and highest permission available).

Plural arguments, such as [Bots], <Keys> or <AppIDs> mean that command supports multiple arguments of given type, separated by a comma. For example, status [Bots] can be used as status MyBot,MyOtherBot,Primary. This will cause given command to be executed on all target bots in the same way as you'd send status to each bot in a separate chat window. Please note that there is no space after ,.

ASF uses all whitespace characters as possible delimiters for a command, such as space and newline characters. This means that you don't have to use space for delimiting your arguments, you can as well use any other whitespace character (such as tab or new line).

ASF will "join" extra out-of-range arguments to plural type of the last in-range argument. This means that redeem bot key1 key2 key3 for redeem [Bots] <Keys> will work exactly the same as redeem bot key1,key2,key3. Together with accepting newline as command delimiter, this makes it possible for you to write redeem bot then paste a list of keys separated by any acceptable delimiter character (such as newline), or standard , ASF delimiter. Keep in mind that this trick can be used only for command variant that uses the most amount of arguments (so specifying [Bots] is mandatory in this case).

As you've read above, a space character is being used as a delimiter for a command, therefore it can't be used in arguments. However, also as stated above, ASF can join out-of-range arguments, which means that you're actually able to use a space character in argument that is defined as a last one for given command. For example, nickname bob Great Bob will properly set nickname of bob bot to "Great Bob". In the similar way you can check names containing spaces in owns command.

---

Some commands are also available with their aliases, mostly to save you on typing or account for different dialects:

Komut	Alias
addlicense	al, addlicence
addlicense ASF	ala
owns ASF	oa
status ASF	sa
redeem	r
redeem^	r^
redeempoints	rp

---

[Bots] argument

[Bots] argument is a special variant of plural argument, as in addition to accepting multiple values it also offers extra functionality.

First and foremost, [Bots] argument supports predefined "bot groups", which are defined as below:

İsim	Açıklama
@all, ASF	All bots defined in the instance
@çiftçilik	Bots that are currently farming
@idle	Bots that are currently not farming
@çevrimdışı	Bots that are currently not connected to the Steam network
@çevrimiçi	Bots that are currently connected to the Steam network

For example, status ASF command is equal to status all,your,bots,listed,here. This can also be used to easily identify the bots that you have access to, as ASF keyword, despite of targeting all bots, will result in response only from those bots that you can actually send the command to. Other groups are also available in order to more easily execute given command only on specific bots meeting the condition.

[Bots] argument also supports special "range" syntax, which allows you to choose a range of bots more easily. The general syntax for [Bots] in this case is [FirstBot]..[LastBot]. At least one of the arguments must be defined. When using <FirstBot>.., all bots starting from FirstBot are affected. When using ..<LastBot>, all bots until LastBot are affected. When using <FirstBot>..<LastBot>, all bots within range from FirstBot until LastBot are affected. For example, if you have bots named A, B, C, D, E, F, you can execute status B..E, which is equal to status B,C,D,E in this case. When using this syntax, ASF will use alphabetical sorting in order to determine which bots are in your specified range. Arguments must be valid bot names recognized by ASF, otherwise range syntax is entirely skipped.

In addition to range syntax above, [Bots] argument also supports regex matching. You can activate regex pattern by using r!<Pattern> as a bot name, where r! is ASF activator for regex matching, and <Pattern> is your regex pattern. An example of a regex-based bot command would be status r!^\d{3} which will send status command to bots that have a name made out of 3 digits (e.g. 123 and 981). Feel free to take a look at the docs for further explanation and more examples of available regex patterns.

---

Gizlilik ayarları

<Settings> argument accepts up to 7 different options, separated as usual with standard comma ASF delimiter. Those are, in order:

Argüman	İsim	Ait Olduğu Üst Grup
1	Profile
2	OwnedGames	Profile
3	Playtime	OwnedGames
4	FriendsList	Profile
5	Inventory	Profile
6	InventoryGifts	Inventory
7	Comments	Profile

For description of above fields, please visit Steam privacy settings.

While valid values for all of them are:

Değer	İsim
1	Private
2	FriendsOnly
3	Public

You can use either a case-insensitive name, or a numeric value. Arguments that were omitted will default to being set to Private. It's important to note relation between child and parent of arguments specified above, as child can never have more open permission than its parent. For example, you can't have Public games owned setting while having Private profile setting.

Örnek

If you want to set all privacy settings of your bot named Main to Private, you can use either of below:

privacy Main 1
privacy Main Private

This is because ASF will automatically assume all other settings to be Private, so there is no need to input them. On the other hand, if you'd like to set all privacy settings to Public, then you should use any of below:

privacy Main 3,3,3,3,3,3,3
privacy Main Public,Public,Public,Public,Public,Public,Public

This way you can also set independent options however you like:

privacy Main Public,FriendsOnly,Private,Public,Public,Private,Public

The above will set profile to public, owned games to friends only, playtime to private, friends list to public, inventory to public, inventory gifts to private and profile comments to public. You can achieve the same with numeric values if you want to.

---

addlicense licenses

addlicense command supports two different license types, those are:

Tip	Alias	Örnek	Açıklama
app	a	app/292030	Game determined by its unique appID.
sub	s	sub/47807	Package containing one or more games, determined by its unique subID.

The distinction is important, as ASF will use Steam network activation for apps, and Steam store activation for packages. Those two are not compatible with each other, typically you'll use apps for free weekends and permanently F2P games, and packages otherwise.

We recommend to explicitly define the type of each entry in order to avoid ambiguous results, but for the backwards compatibility, if you supply invalid type or omit it entirely, ASF will assume that you ask for sub in this case. You can also query one or more of the licenses at the same time, using standard ASF , delimiter.

Tam komut örneği:

addlicense ASF app/292030,sub/47807

---

owns oyunlar

owns command supports several different game types for <games> argument that can be used, those are:

Tip	Takma Ad	Örnek	Açıklama
app	a	app/292030	Game determined by its unique appID.
sub	s	sub/47807	Package containing one or more games, determined by its unique subID.
regex	r	regex/^\d{4}:	Regex applying to the game's name, case-sensitive. See the docs for complete syntax and more examples.
name	n	name/Witcher	Part of the game's name, case-insensitive.

We recommend to explicitly define the type of each entry in order to avoid ambiguous results, but for the backwards compatibility, if you supply invalid type or omit it entirely, ASF will assume that you ask for app if your input is a number, and name otherwise. You can also query one or more of the games at the same time, using standard ASF , delimiter.

Tam komut örneği:

owns ASF app/292030,name/Witcher

---

reedem^ modları

redeem^ command allows you to fine-tune modes that will be used for one single redeem scenario. This works as temporary override of RedeemingPreferences bot config property.

<Modes> argument accepts multiple mode values, separated as usual by a comma. Available mode values are specified below:

Değer	İsim	Açıklama
FAWK	ForceAssumeWalletKey	Forces AssumeWalletKeyOnBadActivationCode redeeming preference to be enabled
FD	ForceDistributing	Forces Distributing redeeming preference to be enabled
FF	ForceForwarding	Forces Forwarding redeeming preference to be enabled
FKMG	ForceKeepMissingGames	Forces KeepMissingGames redeeming preference to be enabled
SAWK	SkipAssumeWalletKey	Forces AssumeWalletKeyOnBadActivationCode redeeming preference to be disabled
SD	SkipDistributing	Forces Distributing redeeming preference to be disabled
SF	SkipForwarding	Forces Forwarding redeeming preference to be disabled
SI	SkipInitial	Skips key redemption on initial bot
SKMG	SkipKeepMissingGames	Forces KeepMissingGames redeeming preference to be disabled
V	Validate	Validates keys for proper format and automatically skips invalid ones

For example, we'd like to redeem 3 keys on any of our bots that don't own games yet, but not our primary bot. For achieving that we can use:

redeem^ primary FF,SI key1,key2,key3

It's important to note that advanced redeem overrides only those RedeemingPreferences that you specify in the command. For example, if you've enabled Distributing in your RedeemingPreferences then there will be no difference whether you use FD mode or not, because distributing will be already active regardless, due to RedeemingPreferences that you use. This is why each forcibly enabled override also has a forcibly disabled one, you can decide yourself if you prefer to override disabled with enabled, or vice versa.

---

encrypt komutu

encrypt command allows you to encrypt arbitrary strings using ASF's encryption methods. <encryptionMethod> must be one of the encryption methods specified and explained in security section. We recommend to use this command through secure channels (ASF console or IPC interface, which also has a dedicated API endpoint for it), as otherwise sensitive details might get logged by various third-parties (such as chat messages being logged by Steam servers).

---

hash komudu

hash command allows you to generate hashes of arbitrary strings using ASF's hashing methods. <hashingMethod> must be one of the hashing methods specified and explained in security section. We recommend to use this command through secure channels (ASF console or IPC interface, which also has a dedicated API endpoint for it), as otherwise sensitive details might get logged by various third-parties (such as chat messages being logged by Steam servers).

---

Giriş komutları

input command can be used only in Headless mode, for inputting given data via IPC or Steam chat when ASF is running without support for user interaction.

General syntax is input [Bots] <Type> <Value>.

<Type> is case-insensitive and defines input type recognized by ASF. Currently ASF recognizes following types:

Tip	Açıklama
Login	SteamLogin bot config property, if missing from config.
Parola	SteamPassword bot config property, if missing from config.
SteamGuard	Auth code sent on your e-mail if you're not using 2FA.
SteamParentalCode	SteamParentalCode bot config property, if missing from config.
TwoFactorAuthentication	2FA token generated from your mobile, if you're using 2FA but not ASF 2FA.

<Value> is value set for given type. Currently all values are strings.

Örnek

Let's say that we have a bot that is protected by SteamGuard in non-2FA mode. We want to launch that bot with Headless set to true.

Bunu yapabilmek için aşağıdaki komutları uygulamamız gerekiyor:

start MySteamGuardBot -> Bot will attempt to log in, fail due to AuthCode needed, then stop due to running in Headless mode. We need this in order to make Steam network send us auth code on our e-mail - if there was no need for that, we'd skip this step entirely.

input MySteamGuardBot SteamGuard ABCDE -> We set SteamGuard input of MySteamGuardBot bot to ABCDE. Of course, ABCDE in this case is auth code that we got on our e-mail.

start MySteamGuardBot -> We start our (stopped) bot again, this time it automatically uses auth code that we set in previous command, properly logging in, then clearing it.

In the same way we can access 2FA-protected bots (if they're not using ASF 2FA), as well as setting other required properties during runtime.

---

Recognized rarities

ASF recognizes following rarities:

Rarity	Takma Ad
Unknown
Common
Uncommon
Rare
Mythical	Epic
Legendary	Exotic
Ancient	Extraordinary
Immortal	Contraband
Arcana
Unusual

Not recognized by ASF rarities (other than defined above) will be defined as Unknown.