-
-
Notifications
You must be signed in to change notification settings - Fork 1.1k
Commands hu HU
Az ASF számos parancsot támogat, amivel a program és a botok viselkedését lehet befolyásolni.
A parancsokat számos módon lehet elküldeni a bot számára:
- Az interaktív ASF konzolon keresztül
- Privát, vagy csoportos Steam chaten keresztül
- Az IPC interfészünkön keresztül
Tartsd észben, hogy az ASF interakciókhoz szükséges, hogy legyen megfelelő hozzáférésed a parancshoz az ASF engedélyek alapján. Nézd meg a SteamUserPermissions
és a SteamOwnerID
konfigurációs beállításokat, ha többet szeretnél erről tudni.
A Steam chaten keresztül kiadott parancsokra befolyással van a CommandPrefix
globális konfigurációs beállítás, ami alapértelmezetten a !
karakter. Ez azt jelenti, hogy például a status
parancs kiadásához azt kell beírnod, hogy !status
(vagy a CommandPrefix
által meghatározott karakter(eke)t). A CommandPrefix
használata nem kötelező konzol, vagy IPC esetén, ki lehet hagyni.
ASF has support for interactive console, as long as you're not running ASF in Headless
mode. Simply press c
button in order to enable command mode, type your command and confirm with enter.
A Steam chaten keresztül is futtathatsz parancsokat egy ASF bot számára. Természetesen önmagaddal nem beszélgethetsz, ezért szükséged lesz minimum egy másik bot accountra, ha a fő accountodra szeretnél parancsokat kiadni.
Ugyanígy egy Steam csoport csoportos chatjét is használhatod. Tudd, hogy ha ezt szeretnéd használni, akkor a SteamMasterClanID
-t be kell állítani, így a bot a csoport chatjén is figyelni fogja a kiadott parancsokat (és be fog lépni, ha szükséges). Ezt arra is fel tudod használni, hogy "magaddal beszélgess", mivel így nincs szükség egy külön bot accountra a privát chattel ellentétben. Egyszerűen be tudod állítani a SteamMasterClanID
-t az újonnan létrehozott csoportodra, majd hozzáférést adhatsz magadnak vagy a SteamOwnerID
, vagy a SteamUserPermissions
használatával a botodon keresztül. Így az ASF bot (te) be fog lépni a csoportba, majd a csoport chatjébe, ahol is várni fogja az általad kiadott parancsokat. Ezután beléphetsz ugyanabba a csoportos chat szobába, hogy magadnak adj ki parancsokat (mivel a parancsokat a chat szobában fogod kiadni és az ASF példány ugyanabban a chat szobában fogja fogadni őket, még akkor is ha csak a te accountod van ott).
A csoportos chat számára kiadott parancsokat mindenki megkapja. Ha azt írtod be, hogy redeem X
és 3 botod van a chat szobában, akkor az olyan lesz, mintha mind a háromnak kiadnád a redeem X
parancsot külön-külön. A legtöbb esetben nem ezt szeretnéd, ezért a given bot
parancsot használd, ami csak egy bot számára lesz elküldve privát ablakban. Az ASF ugyan támogatja a csoportos chateket, mivel számos esetben hasznos lehet, ha az egyetlen bot példányoddal szeretnél kommunikálni, de szinte sosem ajánlott egy parancs kiadása, ha a csoportos chatben 2 vagy több ASF bot van egyszerre, kivéve, ha tisztában vagy az ASF viselkedésével és valóban szeretnéd ugyanazt a parancsot kiadni az összes bot számára.
And even in this case you should use private chat with [Bots]
syntax instead.
A legfejlettebb és legrugalmasabb módja a parancsok kiadásának, tökéletes a felhasználói interakciókhoz (ASF-ui), valamint a harmadik féltől származó programokhoz, vagy szkriptekhez (ASF API), használatához az ASF-t IPC
módban kell futtatni, valamint a kliensnek az IPC interfészen keresztül kell parancsot kiadnia.
Parancs | Hozzáférés | Leírás |
---|---|---|
2fa [Bots] |
Master |
Ideiglenes 2FA tokent generál a megadott bot példányokhoz. |
2fafinalize [Bots] <ActivationCode> |
Master |
Finalizes process of assigning new 2FA credentials for given bot instances, using SMS/e-mail activation code. |
2fafinalized [Bots] <ActivationCode> |
Master |
Imports already-finalized 2FA credentials for given bot instances, using 2FA token for verification. |
2fafinalizedforce [Bots] |
Master |
Imports already-finalized 2FA credentials for given bot instances, skipping 2FA token verification. |
2fainit [Bots] |
Master |
Starts process of assigning new 2FA credentials for given bot instances. |
2fano [Bots] |
Master |
Megtagadja az összes 2FA megerősítést a megadott példányoktól. |
2faok [Bots] |
Master |
Elfogadja az összes 2FA megerősítést a megadott bot példányoknak. |
addlicense [Bots] <Licenses> |
Operator |
Activates given licenses , explained below, on given bot instances (free games only). |
balance [Bots] |
Master |
Visszaadja a megadott bot példányok pénztárca egyenlegét. |
bgr [Bots] |
Master |
Információt ad a BGR várólistáról a megadott botok számára. |
bgrclear [Bots] |
Master |
Clears BGR queue of given bot instances. |
encrypt <encryptionMethod> <stringToEncrypt> |
Owner |
Encrypts the string using provided cryptographic method - further explained below. |
exit |
Owner |
Leállítja a teljes ASF processzt. |
farm [Bots] |
Master |
Újraindítja a kártya farmoló modult a megadott bot példányokon. |
fb [Bots] |
Master |
Lists apps blacklisted from automatic farming of given bot instances. |
fbadd [Bots] <AppIDs> |
Master |
Adds given appIDs to apps blacklisted from automatic farming of given bot instances. |
fbrm [Bots] <AppIDs> |
Master |
Removes given appIDs from apps blacklisted from automatic farming of given bot instances. |
fq [Bots] |
Master |
Lists priority farming queue of given bot instances. |
fqadd [Bots] <AppIDs> |
Master |
Adds given appIDs to priority farming queue of given bot instances. |
fqrm [Bots] <AppIDs> |
Master |
Removes given appIDs from farming queue of given bot instances. |
hash <hashingMethod> <stringToHash> |
Owner |
Generated a hash of the string using provided cryptographic method - further explained below. |
help |
FamilySharing |
Megmutatja a súgót (egy linket erre az oldalra). |
input [Bots] <Type> <Value> |
Master |
Megadott input típust beállítja a megadott értékre a megadott bot példányok számára, kizárólag a Headless módban működik - lentebb jobban el van magyarázva. |
level [Bots] |
Master |
Shows Steam account level of given bot instances. |
loot [Bots] |
Master |
Sends all LootableTypes Steam community items of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one). |
loot@ [Bots] <AppIDs> |
Master |
Sends all LootableTypes Steam community items matching given AppIDs of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one). This is the opposite of loot% . |
loot% [Bots] <AppIDs> |
Master |
Sends all LootableTypes Steam community items apart from given AppIDs of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one). This is the opposite of loot@ . |
loot^ [Bots] <AppID> <ContextID> |
Master |
Sends all Steam items from given AppID in ContextID of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one). |
loot& [Bots] <AppID> <ContextID> <Rarities> |
Master |
Sends all Steam items from given AppID in ContextID matching given Rarities of given bot instances to Master user defined in their SteamUserPermissions (with lowest steamID if more than one). |
mab [Bots] |
Master |
Lists apps blacklisted from automatic trading in MatchActively . |
mabadd [Bots] <AppIDs> |
Master |
Adds given appIDs to apps blacklisted from automatic trading in MatchActively . |
mabrm [Bots] <AppIDs> |
Master |
Removes given appIDs from apps blacklisted from automatic trading in MatchActively . |
match [Bots] |
Master |
Special command for ItemsMatcherPlugin which triggers MatchActively routine immediately. |
nickname [Bots] <Nickname> |
Master |
Changes Steam nickname of given bot instances to given nickname . |
owns [Bots] <Games> |
Operator |
Checks if given bot instances already own given games , explained below. |
pause [Bots] |
Operator |
Permanently pauses automatic cards farming module of given bot instances. ASF will not attempt to farm current account in this session, unless you manually resume it, or restart the process. |
pause~ [Bots] |
FamilySharing |
Temporarily pauses automatic cards farming module of given bot instances. Farming will be automatically resumed on the next playing event, or bot disconnect. You can resume farming to unpause it. |
pause& [Bots] <Seconds> |
Operator |
Temporarily pauses automatic cards farming module of given bot instances for given amount of seconds . After delay, cards farming module is automatically resumed. |
play [Bots] <AppIDs,GameName> |
Master |
Switches to manual farming - launches given AppIDs on given bot instances, optionally also with custom GameName . In order for this feature to work properly, your Steam account must own a valid license to all the AppIDs that you specify here, this includes F2P games as well. Use reset or resume for returning. |
points [Bots] |
Master |
Displays number of points in Steam points shop. |
privacy [Bots] <Settings> |
Master |
Changes Steam privacy settings of given bot instances, to appropriately selected options explained below. |
redeem [Bots] <Keys> |
Operator |
Redeems given cd-keys or wallet codes on given bot instances. |
redeem^ [Bots] <Modes> <Keys> |
Operator |
Redeems given cd-keys or wallet codes on given bot instances, using given modes explained below. |
redeempoints [Bots] <DefinitionIDs> |
Operator |
Redeems Steam points for given assets on given bot instances. By default, only free items are allowed, append ! character at the end of each DefinitionID that you want to redeem unconditionally, even if paid. |
reset [Bots] |
Master |
Resets the playing status back to original (previous) state, the command is used during manual farming with play command. |
restart |
Owner |
Restarts ASF process. |
resume [Bots] |
FamilySharing |
Resumes automatic farming of given bot instances. |
start [Bots] |
Master |
Starts given bot instances. |
stats |
Owner |
Prints process statistics, such as managed memory usage. |
status [Bots] |
FamilySharing |
Prints status of given bot instances. |
std [Bots] |
Master |
Special command for SteamTokenDumperPlugin which triggers refresh of selected bots and submission of data immediately. |
stop [Bots] |
Master |
Stops given bot instances. |
tb [Bots] |
Master |
Listázza a tiltólistán lévő felhasználókat, melyek így nem tudnak csereajánlást küldeni a megadott bot példányok számára. |
tbadd [Bots] <SteamIDs64> |
Master |
Tiltólistára rakja a megadott steamIDs -t, így a megadott bot példányoknak nem tud csereajánlatot küldeni. |
tbrm [Bots] <SteamIDs64> |
Master |
A megadott steamIDs -t törli a tiltólistáról, így azok tudnak csereajánlást küldeni a megadott bot példányok számára. |
transfer [Bots] <TargetBot> |
Master |
Sends all TransferableTypes Steam community items from given bot instances to target bot instance. |
transfer@ [Bots] <AppIDs> <TargetBot> |
Master |
Sends all TransferableTypes Steam community items matching given AppIDs from given bot instances to target bot instance. This is the opposite of transfer% . |
transfer% [Bots] <AppIDs> <TargetBot> |
Master |
Sends all TransferableTypes Steam community items apart from given AppIDs from given bot instances to target bot instance. This is the opposite of transfer@ . |
transfer^ [Bots] <AppID> <ContextID> <TargetBot> |
Master |
Sends all Steam items from given AppID in ContextID of given bot instances to target bot instance. |
transfer& [Bots] <AppID> <ContextID> <TargetBot> <Rarities> |
Master |
Sends all Steam items from given AppID in ContextID matching given Rarities of given bot instances to target bot instance. |
unpack [Bots] |
Master |
Unpacks all booster packs stored in the inventory of given bot instances. |
update [Channel] |
Owner |
Checks GitHub for new ASF release and updates to it if available. This is normally done automatically every UpdatePeriod . Optional Channel argument specifies the UpdateChannel , if not provided defaults to the one set in global config. Channel can end with ! character, which will force update available on given channel - including a possibility of e.g. downgrading. |
updateplugins [Channel] [Plugins] |
Owner |
Updates selected plugins. Optional Channel property allows you to pick a different UpdateChannel for plugin updates, if they support multiple ones. Channel can end with ! character, which will force update available on given channel - including a possibility of e.g. downgrading, although exact functionality depends on a particular plugin. When Plugins are not provided, then all plugins considered for automatic updates through PluginsUpdateList and PluginsUpdateMode are updated. If you want to update selected ones, especially those disabled from automatic updates by default, you need to provide Channel as well as Plugins you want to update, then ASF will proceed with updating them regardless of their automatic updates setting. |
version |
FamilySharing |
Prints version of ASF. |
All commands are case-insensitive, but their arguments (such as bot names) are usually case-sensitive.
Arguments follow UNIX philosophy, square brackets [Optional]
indicate that given argument is optional, while angle brackets <Mandatory>
indicate that given argument is mandatory. You should replace the arguments that you want to declare, such as [Bots]
or <Nickname>
with actual values that you want to issue the command with, omitting the braces.
[Bots]
argument, as indicated by the brackets, is optional in all commands. When specified, command is executed on given bots. When omitted, command is executed on current bot that receives the command (Steam chat), or in according to DefaultBot
configured property (IPC and interactive console).
As an example, status A
sent to bot B
is the same as sending status
to bot A
, bot B
in this case acts only as a proxy. This can also be used for sending commands to bots that are unavailable otherwise, for example starting stopped bots, or executing actions on your main account (that you're using for executing the commands).
Access of the command defines minimum EPermission
of SteamUserPermissions
that is required to use the command, with an exception of Owner
which is SteamOwnerID
defined in global configuration file (and highest permission available).
Plural arguments, such as [Bots]
, <Keys>
or <AppIDs>
mean that command supports multiple arguments of given type, separated by a comma. For example, status [Bots]
can be used as status MyBot,MyOtherBot,Primary
. This will cause given command to be executed on all target bots in the same way as you'd send status
to each bot in a separate chat window. Please note that there is no space after ,
.
ASF uses all whitespace characters as possible delimiters for a command, such as space and newline characters. This means that you don't have to use space for delimiting your arguments, you can as well use any other whitespace character (such as tab or new line).
ASF will "join" extra out-of-range arguments to plural type of the last in-range argument. This means that redeem bot key1 key2 key3
for redeem [Bots] <Keys>
will work exactly the same as redeem bot key1,key2,key3
. Together with accepting newline as command delimiter, this makes it possible for you to write redeem bot
then paste a list of keys separated by any acceptable delimiter character (such as newline), or standard ,
ASF delimiter. Keep in mind that this trick can be used only for command variant that uses the most amount of arguments (so specifying [Bots]
is mandatory in this case).
As you've read above, a space character is being used as a delimiter for a command, therefore it can't be used in arguments. However, also as stated above, ASF can join out-of-range arguments, which means that you're actually able to use a space character in argument that is defined as a last one for given command. For example, nickname bob Great Bob
will properly set nickname of bob
bot to "Great Bob". In the similar way you can check names containing spaces in owns
command.
Some commands are also available with their aliases, mostly to save you on typing or account for different dialects:
Parancs | Alternatív parancs |
---|---|
addlicense |
al , addlicence
|
addlicense ASF |
ala |
owns ASF |
oa |
status ASF |
sa |
redeem |
r |
redeem^ |
r^ |
redeempoints |
rp |
[Bots]
argument is a special variant of plural argument, as in addition to accepting multiple values it also offers extra functionality.
First and foremost, [Bots]
argument supports predefined "bot groups", which are defined as below:
Név | Leírás |
---|---|
@all , ASF
|
All bots defined in the instance |
@farmolás |
Bots that are currently farming |
@idle |
Bots that are currently not farming |
@offline |
Bots that are currently not connected to the Steam network |
@online |
Bots that are currently connected to the Steam network |
For example, status ASF
command is equal to status all,your,bots,listed,here
. This can also be used to easily identify the bots that you have access to, as ASF
keyword, despite of targeting all bots, will result in response only from those bots that you can actually send the command to. Other groups are also available in order to more easily execute given command only on specific bots meeting the condition.
[Bots]
argument also supports special "range" syntax, which allows you to choose a range of bots more easily. The general syntax for [Bots]
in this case is [FirstBot]..[LastBot]
. At least one of the arguments must be defined. When using <FirstBot>..
, all bots starting from FirstBot
are affected. When using ..<LastBot>
, all bots until LastBot
are affected. When using <FirstBot>..<LastBot>
, all bots within range from FirstBot
until LastBot
are affected. For example, if you have bots named A, B, C, D, E, F
, you can execute status B..E
, which is equal to status B,C,D,E
in this case. When using this syntax, ASF will use alphabetical sorting in order to determine which bots are in your specified range. Arguments must be valid bot names recognized by ASF, otherwise range syntax is entirely skipped.
In addition to range syntax above, [Bots]
argument also supports regex matching. You can activate regex pattern by using r!<Pattern>
as a bot name, where r!
is ASF activator for regex matching, and <Pattern>
is your regex pattern. An example of a regex-based bot command would be status r!^\d{3}
which will send status
command to bots that have a name made out of 3 digits (e.g. 123
and 981
). Feel free to take a look at the docs for further explanation and more examples of available regex patterns.
A <Settings>
argumentum akár 7 különböző opciót is elfogad, a szokásos ASF elválasztóval, a vesszővel, elválasztva egymástól. Ez sorrendben a következők:
Argumentum | Név | Gyermeke |
---|---|---|
1 | Profile | |
2 | OwnedGames | Profile |
3 | Playtime | OwnedGames |
4 | FriendsList | Profile |
5 | Inventory | Profile |
6 | InventoryGifts | Inventory |
7 | Comments | Profile |
For description of above fields, please visit Steam privacy settings.
A következő értékeket vehetik fel:
Érték | Név |
---|---|
1 | Private |
2 | FriendsOnly |
3 | Public |
You can use either a case-insensitive name, or a numeric value. Arguments that were omitted will default to being set to Private
. It's important to note relation between child and parent of arguments specified above, as child can never have more open permission than its parent. For example, you can't have Public
games owned setting while having Private
profile setting.
If you want to set all privacy settings of your bot named Main
to Private
, you can use either of below:
privacy Main 1
privacy Main Private
This is because ASF will automatically assume all other settings to be Private
, so there is no need to input them. On the other hand, if you'd like to set all privacy settings to Public
, then you should use any of below:
privacy Main 3,3,3,3,3,3,3
privacy Main Public,Public,Public,Public,Public,Public,Public
This way you can also set independent options however you like:
privacy Main Public,FriendsOnly,Private,Public,Public,Private,Public
The above will set profile to public, owned games to friends only, playtime to private, friends list to public, inventory to public, inventory gifts to private and profile comments to public. You can achieve the same with numeric values if you want to.
addlicense
command supports two different license types, those are:
Típus | Alternatív parancs | Példa | Leírás |
---|---|---|---|
app |
a |
app/292030 |
Game determined by its unique appID . |
sub |
s |
sub/47807 |
Package containing one or more games, determined by its unique subID . |
The distinction is important, as ASF will use Steam network activation for apps, and Steam store activation for packages. Those two are not compatible with each other, typically you'll use apps for free weekends and permanently F2P games, and packages otherwise.
We recommend to explicitly define the type of each entry in order to avoid ambiguous results, but for the backwards compatibility, if you supply invalid type or omit it entirely, ASF will assume that you ask for sub
in this case. You can also query one or more of the licenses at the same time, using standard ASF ,
delimiter.
Complete command example:
addlicense ASF app/292030,sub/47807
owns
command supports several different game types for <games>
argument that can be used, those are:
Típus | Alternatív parancs | Példa | Leírás |
---|---|---|---|
app |
a |
app/292030 |
Game determined by its unique appID . |
sub |
s |
sub/47807 |
Package containing one or more games, determined by its unique subID . |
regex |
r |
regex/^\d{4}: |
Regex applying to the game's name, case-sensitive. See the docs for complete syntax and more examples. |
név |
n |
name/Witcher |
Part of the game's name, case-insensitive. |
We recommend to explicitly define the type of each entry in order to avoid ambiguous results, but for the backwards compatibility, if you supply invalid type or omit it entirely, ASF will assume that you ask for app
if your input is a number, and name
otherwise. You can also query one or more of the games at the same time, using standard ASF ,
delimiter.
Complete command example:
owns ASF app/292030,name/Witcher
redeem^
command allows you to fine-tune modes that will be used for one single redeem scenario. This works as temporary override of RedeemingPreferences
bot config property.
<Modes>
argument accepts multiple mode values, separated as usual by a comma. Available mode values are specified below:
Érték | Név | Leírás |
---|---|---|
FAWK | ForceAssumeWalletKey | Forces AssumeWalletKeyOnBadActivationCode redeeming preference to be enabled |
FD | ForceDistributing | Forces Distributing redeeming preference to be enabled |
FF | ForceForwarding | Forces Forwarding redeeming preference to be enabled |
FKMG | ForceKeepMissingGames | Forces KeepMissingGames redeeming preference to be enabled |
SAWK | SkipAssumeWalletKey | Forces AssumeWalletKeyOnBadActivationCode redeeming preference to be disabled |
SD | SkipDistributing | Forces Distributing redeeming preference to be disabled |
SF | SkipForwarding | Forces Forwarding redeeming preference to be disabled |
SI | SkipInitial | Skips key redemption on initial bot |
SKMG | SkipKeepMissingGames | Forces KeepMissingGames redeeming preference to be disabled |
V | Validate | Validates keys for proper format and automatically skips invalid ones |
For example, we'd like to redeem 3 keys on any of our bots that don't own games yet, but not our primary
bot. For achieving that we can use:
redeem^ primary FF,SI key1,key2,key3
It's important to note that advanced redeem overrides only those RedeemingPreferences
that you specify in the command. For example, if you've enabled Distributing
in your RedeemingPreferences
then there will be no difference whether you use FD
mode or not, because distributing will be already active regardless, due to RedeemingPreferences
that you use. This is why each forcibly enabled override also has a forcibly disabled one, you can decide yourself if you prefer to override disabled with enabled, or vice versa.
encrypt
command allows you to encrypt arbitrary strings using ASF's encryption methods. <encryptionMethod>
must be one of the encryption methods specified and explained in security section. We recommend to use this command through secure channels (ASF console or IPC interface, which also has a dedicated API endpoint for it), as otherwise sensitive details might get logged by various third-parties (such as chat messages being logged by Steam servers).
hash
command allows you to generate hashes of arbitrary strings using ASF's hashing methods. <hashingMethod>
must be one of the hashing methods specified and explained in security section. We recommend to use this command through secure channels (ASF console or IPC interface, which also has a dedicated API endpoint for it), as otherwise sensitive details might get logged by various third-parties (such as chat messages being logged by Steam servers).
input
command can be used only in Headless
mode, for inputting given data via IPC or Steam chat when ASF is running without support for user interaction.
General syntax is input [Bots] <Type> <Value>
.
A <Type>
kis- és nagybetű érzékeny és meghatározza az input típust, amit az ASF felismer. Jelenleg az ASF az alábbi típusokat ismeri:
Típus | Leírás |
---|---|
Login |
SteamLogin bot konfigurációs beállítás, ha hiányozna a konfigurációból. |
Password |
SteamPassword bot konfigurációs beállítás, ha hiányozna a konfigurációból. |
SteamGuard | Engedélyező kód, amit az e-mail címedre küldenek, ha nem használsz 2FA-t. |
SteamParentalCode |
SteamParentalCode bot konfigurációs beállítás, ha hiányozna a konfigurációból. |
TwoFactorAuthentication | 2FA token, amit a telefonod generált, ha használod a 2FA-t, de nem az ASF 2FA-t. |
<Value>
is value set for given type. Jelenleg minden érték string.
Mondjuk, hogy van egy botunk, ami SteamGuarddal van védve, de nem 2FA módban. We want to launch that bot with Headless
set to true
.
Ehhez az alábbi parancsokat kell kiadnunk:
start MySteamGuardBot
-> Bot will attempt to log in, fail due to AuthCode needed, then stop due to running in Headless
mode. Erre azért van szükség, mert a Steam hálózat el fogja küldeni az engedélyező kódot az e-mailünkre - ha nem lenne erre szükség, akkor átugorhatnánk ezt a részt.
input MySteamGuardBot SteamGuard ABCDE
-> We set SteamGuard
input of MySteamGuardBot
bot to ABCDE
. Természetesen az ABCDE
-t helyettesítsd be azzal az engedélyező kóddal, amit az e-mailben kaptál.
start MySteamGuardBot
-> We start our (stopped) bot again, this time it automatically uses auth code that we set in previous command, properly logging in, then clearing it.
Ehhez hasonlóan hozzáférhetünk a 2FA által védett botokhoz is (ha nem használják az ASF 2FA-t), valamint a többi szükséges beállítást is beállíthatjuk futásidőben.
ASF recognizes following rarities:
Rarity | Alternatív parancs |
---|---|
Unknown |
|
Common |
|
Uncommon |
|
Rare |
|
Mythical |
Epic |
Legendary |
Exotic |
Ancient |
Extraordinary |
Immortal |
Contraband |
Arcana |
|
Unusual |
Not recognized by ASF rarities (other than defined above) will be defined as Unknown
.
- 🏡 Főoldal
- 🔧 Beállítások
- 💬 GYIK
- ⚙️ Beállítások (Ezzel kezd)
- 👥 Játék beváltás
- 📢 Parancsok
- 🛠️ Kompatibilitás
- 🧩 ItemsMatcherPlugin
- 📋 Management
- ⏱️ Teljesítmény
- 📡 Remote communication
- 👪 Steam családi megosztása
- 🔄 Kereskedés