Merge pull request #10313 from P-I-Engineer/patch-1

add stick_center note to vtol/mixer profile docs for 4+1 motor vtol configurations.
iNavFlight · Aug 21, 2024 · 6a20ed4 · 6a20ed4
2 parents b5e8b2b + e0eec20
commit 6a20ed4
Show file tree

Hide file tree

Showing 2 changed files with 5 additions and 2 deletions.
diff --git a/docs/MixerProfile.md b/docs/MixerProfile.md
@@ -41,6 +41,8 @@ The default `mmix` throttle value is 0.0, It will not show in `diff` command whe
 - -1.0<throttle<=0.0 : motor stop, default value 0, set to -1 to use a place holder for subsequent motor rules
 - -2.0<throttle<-1.0 : spin regardless of throttle position at speed `abs(throttle)-1` when Mixer Transition is activated.
 
+Airmode type should be set to "STICK_CENTER". Airmode type must NOT be set to "THROTTLE_THRESHOLD". If set to throttle threshold the (-) motor will spin till throttle threshold is passed. 
+
 Example: This will spin motor number 5 (counting from 1) at 20%, in transition mode only, to gain speed for a "4 rotor 1 pusher" setup:
 
 ```

diff --git a/docs/VTOL.md b/docs/VTOL.md
@@ -186,7 +186,8 @@ Add new servo mixer rules, and select 'Mixer Transition' in input. Set the weigh
 ## Motor 'Transition Mixing': Dedicated forward motor configuration
 In motor mixer set:
 - -2.0 < throttle < -1.0: The motor will spin regardless of the radio's throttle position at a speed of `abs(throttle) - 1` multiplied by throttle range only when Mixer Transition is activated.
-
+- Airmode type should be set to "STICK_CENTER". Airmode type must NOT be set to "THROTTLE_THRESHOLD". If set to throttle threshold the (-) motor will spin till throttle threshold is passed.
+  
 ![Alt text](Screenshots/mixerprofile_4puls1_mix.png)
 
 ## TailSitter 'Transition Mixing': 
@@ -233,4 +234,4 @@ If you set `mixer_automated_switch` to `OFF` for all mixer profiles (the default
     2. In addition to 1. Add a little yaw mixing(about 0.2) in tilt motors.
 - There will be a time window that tilting motors is providing up lift but rear motor isn't. Result in a sudden pitch raise on the entering of the mode. Use the max speed or faster speed in tiling servo to reduce the time window. OR lower the throttle on the entering of the FW mode to mitigate the effect.
 ## Dedicated forward motor 
-- Easiest way to setup a vtol. and efficiency can be improved by using different motor/prop for hover and forward flight
+- Easiest way to setup a vtol. and efficiency can be improved by using different motor/prop for hover and forward flight