-
Notifications
You must be signed in to change notification settings - Fork 50
macOS Sonoma Boot Failures
With macOS 14.1.1, 14.2 beta 2, and (likely) 13.6.2, Apple "fixed" the bug by making the ProMotion setting not change the boot-time screen mode.
Unfortunately, they forgot to actually reset the boot-time screen mode to the safe (ProMotion) setting, which means that affected users who upgrade with ProMotion disabled are now forever stuck in a broken state. To make things worse, we have no idea how to detect this condition preemptively in macOS.
To make matters even worse, Apple are still not forcing a System Recovery roll-forward to 14.x, which means the vast majority of users will be in the worst-case dangerous state where, if the bug occurs, no recovery is possible.
We still expect Apple to fix this properly in a future version, but we don't have the slightest idea how they thought this interim "fix" was a good idea. It just makes things even more confusing and silently deadly for affected users.
As a result of this update, we are now outright blocking Asahi Linux installs on the subset of affected systems with outdated System Recovery (likely the vast majority of users with 14" and 16" machines and up to date macOS), for safety reasons. Sorry. We tried, but we're giving up on trying to patch over the issue on our side or detect the problem cases ahead of time for our users. Apple broke this, only Apple can fix it, and they need to fix it the right way. There is nothing else we can do.
The only workaround at this time is to do a preemptive DFU Revive using another Mac, which will force an upgrade of System Recovery and at least leave your system with a functional fail-safe. The problem might still occur while installing Asahi in this case, but at least you will be able to return to macOS (if this happens, you're still stuck without Asahi until Apple fixes this though). The installer will allow installation for users with an up to date System Recovery, with a warning.
Update 2023-11-09: Apple have released Ventura 13.6.2 with a claimed fix for this bug. At this point, we believe this is an interim fix to work around the worst case situation affecting single-boot Ventura users (see the last section of this document), and NOT yet a complete fix. Multi-boot and (to a lesser extent) Asahi Linux users are still affected in the same way. We expect a major/complete fix will likely arrive with the Sonoma 14.2 release (currently in beta, not yet fixed in beta 1).
Update: We have made changes to the Asahi Installer, to our bootloader m1n1, and to asahi-nvram. At this time, we believe installing or having installed Asahi should not introduce any additional danger over a plain vanilla Sonoma upgrade on a single-boot machine.
macOS Sonoma and macOS Ventura 13.6 were released with multiple serious bugs in their upgrade and boot process. Combined, these bugs can create conditions where a machine always boots to a black screen, no matter what power button press combination is used. This leaves users stuck, and the only solution is to use DFU recovery.
This bug can affect users both with and without Asahi Linux installed.
This situation can happen with certain settings on certain models, when multiple macOS versions are installed side by side (one Sonoma, one earlier). Since Asahi Linux behaves as if it were macOS 12.3/12.4/13.5 (depending on model and installation time), dual-boot installs of macOS Sonoma and Asahi Linux have the same effect. For macOS 13.6, this situation doesn't even require a dual-boot system, and can be triggered stand-alone as the only installed OS.
We have updated the Asahi Linux installer to automatically perform an integrity check and diagnose your system on startup. To run it, paste this command into Terminal in macOS:
curl https://alx.sh | sh
You can quit the installer once you reach the main menu, without making any changes to your system.
Apple bug reports: FB13319681 and FB13319708 and FB13313702
There are two bugs:
-
macOS Sonoma upgrades use the previously installed version as System Recovery. This makes some sense, but does not consider backwards compatibility problems between older RecoveryOS and newer firmware. If this mismatch causes recoveryOS to fail to boot, this will leave System Recovery unusable.
-
For 14" and 16" models: Once System Firmware is updated to the macOS Sonoma version, if the display is configured to a refresh rate other than ProMotion, that system will no longer be able to boot into older macOS installs nor Asahi Linux correctly. This includes recovery mode when those systems are set as the default boot OS, and also System Recovery at least until the next subsequent OS upgrade. *
* Asahi Linux in particular will, somewhat amusingly, still boot to a login screen in this case, but the bootloader output (U-Boot / GRUB) will not be visible. This is because our Linux display driver can fortuitously recover from the misconfigured display scenario, while the macOS driver can't. Nonetheless, you'll still be in trouble, as you won't be able to use the Boot Picker (which is recoveryOS) to switch back to macOS.
You will need another Mac to recover from the fault using DFU mode. However, you will not lose data.
MacBook Pro models with ProMotion displays (14" and 16") are affected by the black screen boot bug.
macOS Sonoma 14.0+ (not fixed as of 2023-10-31)macOS Ventura 13.6+ (uses 14.0 firmware)macOS Monterey 12.7 (unclear, some reports of 13.6 and some of 14.0 firmware, assume it's affected just in case)
IMPORTANT UPDATE: We have just learned that the standard software update process will always upgrade to the latest firmware version, even when you request a specific macOS version manually. For this reason, ALL macOS upgrades performed after the release of macOS Sonoma are affected, regardless of target version. Installing older versions will silently download Sonoma firmware.
We recommend waiting until these issues are fixed by Apple before upgrading. If you want to risk it and you have a 14" or 16" machine, make sure the display refresh rate is set to ProMotion before attempting the upgrade. You might still end up with a corrupted System Recovery, which can only be fixed with DFU mode or a subsequent successful upgrade.
Regardless of whether you plan to install Asahi Linux or not, we recommend running the Asahi Linux installer after a Sonoma upgrade to check the status of your System Recovery partition. It will inform you about any issues prior to the main menu, before any changes are made to your system.
If you just want to install Asahi Linux: macOS 13.5 is safe to upgrade to. To download an installer for 13.5 specifically, run softwareupdate --fetch-full-installer --full-installer-version 13.5. Don't forget to delete the installer once you're done with the upgrade, to save disk space.
Feel free to stay on macOS version 13.5 or earlier for the time being. You can safely install Asahi Linux if you wish.
The Asahi Linux installer has been updated to check the version of your System Recovery, and will inform you of the risks if there is a mismatch. It will also check the ProMotion refresh rate, and refuse to install if it is set to anything other than ProMotion mode. Therefore, it is safe to install at this time.
Start the installation process normally. Follow the prompts carefully and read all the information printed. If your System Recovery version is mismatched, make sure you understand the risks. If your display refresh rate is incorrect, the installer will ask you to change it.
If you are currently booted into macOS, ensure the display refresh rate is set to ProMotion (for 14" and 16" machines).
We recommend running the Asahi Linux installer again to verify the integrity of your System RecoveryOS partition and ProMotion status. If there is a problem, you should refrain from making any major changes to your system until the issue is fixed by Apple.
If your machine boots to a black screen (brief Apple logo, then nothing), first attempt a regular recoveryOS boot by fully powering down the machine, then holding down the power button.
If that does not work, try booting into System RecoveryOS. To do this, fully power down the machine, and then perform a fast "tap-and-hold" power button gesture (press and release once, then press and hold).
Update: If you are stuck in Asahi Linux (the above steps don't work to get to a boot picker to switch to macOS, but your machine otherwise boots normally into Asahi), you should be able to use asahi-bless (available in Fedora) to switch back to Sonoma directly from Linux and resolve the problem..
If that also does not work, unfortunately you will have to resort to DFU mode. See the following section for details.
If you can successfully reach a boot menu, select your macOS Sonoma install and hold down Option while confirming your selection to make it the default boot OS. If you have macOS 13.6 ventura instead, follow the special section below.
First, you will need another Mac running a recent version of macOS (an Intel Mac is OK). Install Apple Configurator from the App Store on the other Mac and open it.
Follow Apple's instructions to connect your two machines together, and put your target machine in DFU mode. The target machine's display should remain off at this point.
You should see a large "DFU" icon in Apple Configurator. If you see anything else, the machine is not in the correct mode. Repeat the procedure and try again.
Once you see the DFU icon, right click it and select Advanced → Revive. This will begin the revive process.
If you get a message saying "A system update is required for this device", you can ignore it and press "Restore Anyway". This process has been tested with another Mac running macOS 13.5.
Follow the prompts and accept any accessory connection requests. Do not leave the machine unattended, as you might miss one of those prompts (and there is a timeout). The process will take a few minutes to complete.
Once the Revive process completes, the machine should boot into macOS Recovery. Follow the prompts and authenticate yourself.
After this, the machine will reboot into the Boot Picker.
If you have macOS 13.6 ventura instead, follow the special section below.
Select your macOS Sonoma install, then go into the Display settings page and set the display refresh rate to ProMotion. This will prevent the problem from reoccurring.
Should you wind up with a "black screen boot" again after this point, follow the steps in the previous section to perform the "tap-and-hold" power gesture. This should now work properly, as your System RecoveryOS has been updated. You may then select macOS again and fix the display refresh rate.
You can take your Mac to the Apple Store and ask them to do a DFU Revive. Make sure they do not do a Restore, which would wipe all your data. They should perform this service for free. Do not let them charge you any money for it. This is a problem Apple caused, and purely a software issue. If the technicians claim there is hardware damage, they are wrong.
macOS 13.6 Ventura uses the macOS Sonoma System Firmware, but suffers from the problem. Even users with just 13.6 installed single-boot are affected by this issue (no Asahi Linux needed). We do not understand how Apple managed to release an OS update that, when upgraded to normally, leaves machines unbootable if their display refresh rate is not the default. This seems to have been a major QA oversight by Apple.
If your system has 13.6 Ventura and ended up in the black boot situation, unfortunately the only known solution is to upgrade to Sonoma. From the Boot Picker, select Options. This will boot into recoveryOS. From there, select "Install macOS Sonoma". Follow the prompts and select your existing macOS volume. This will upgrade macOS without losing your data.
Wiki for the Asahi Linux project: https://asahilinux.org/