-
Notifications
You must be signed in to change notification settings - Fork 50
SW:Ubuntu Asahi Qemu
Tested on Ubuntu 22.10 Asahi on M1 Air.
Other Ubuntu Asahi install info at https://github.com/AsahiLinux/docs/wiki/SW%3AAlternative-Distros
Also installs virt-manager.
Slirp included when compiling, to have user networking: https://bugs.launchpad.net/qemu/+bug/1917161
sudo apt -y install git libglib2.0-dev libfdt-dev \
libpixman-1-dev zlib1g-dev ninja-build \
git-email libaio-dev libbluetooth-dev \
libcapstone-dev libbrlapi-dev libbz2-dev \
libcap-ng-dev libcurl4-gnutls-dev libgtk-3-dev \
libibverbs-dev libjpeg8-dev libncurses5-dev \
libnuma-dev librbd-dev librdmacm-dev \
libsasl2-dev libsdl2-dev libseccomp-dev \
libsnappy-dev libssh-dev \
libvde-dev libvdeplug-dev libvte-2.91-dev \
libxen-dev liblzo2-dev valgrind xfslibs-dev \
libnfs-dev libiscsi-dev flex bison meson \
qemu-utils virt-manager
git clone https://gitlab.com/qemu-project/qemu.git
cd qemu
git submodule init
git submodule update
git clone https://gitlab.freedesktop.org/slirp/libslirp
cd libslirp
meson build
ninja -C build install
cd ..
mkdir build
cd build
../configure --enable-slirp
make -j$(nproc)
sudo make install
https://wiki.qemu.org/Documentation/Networking
wget reactos-32bit-bootcd-nightly.7z
7z x reactos-32bit-bootcd-nightly.7z
mv reactos*.iso ReactOS.iso
20G is max growable disk size here:
qemu-img create -f qcow2 ReactOS.qcow2 20G
Here -m 3G is 3 GB RAM.
Edit start.sh and set it executeable chmod +x start.sh with this content:
qemu-system-i386 -m 3G -drive if=ide,index=0,media=disk,file=ReactOS.qcow2 \
-drive if=ide,index=2,media=cdrom,file=ReactOS.iso -boot order=d \
-serial stdio -netdev user,id=n0 -device rtl8139,netdev=n0
Then run ./start.sh
- Create growable harddisk image of 80 GB:
qemu-img create -f qcow2 winxp.qcow2 80G
- Start install from winxp.iso
Edit start.sh and set it executeable chmod +x start.sh, here -m 4G is 4 GB RAM:
qemu-system-i386 -m 4G -drive if=ide,index=0,media=disk,file=winxp.qcow2 \
-drive if=ide,index=2,media=cdrom,file=winxp.iso -boot order=d \
-serial stdio -netdev user,id=n0 -device rtl8139,netdev=n0
- After install, boot without iso
qemu-system-i386 -m 4G -drive if=ide,index=0,media=disk,file=winxp.qcow2 \
-boot order=c \
-serial stdio -netdev user,id=n0 -device rtl8139,netdev=n0
- Create growable harddisk image of 80 GB:
qemu-img create -f qcow2 win10.qcow2 80G
- Start install from win10.iso
Edit start.sh and set it executeable chmod +x start.sh, here -m 4G is 4 GB RAM:
qemu-system-x86_64 -m 4G -drive if=ide,index=0,media=disk,file=win10.qcow2 \
-drive if=ide,index=2,media=cdrom,file=win10.iso -boot order=d \
-serial stdio -netdev user,id=n0 -device rtl8139,netdev=n0
- After install, boot without iso
qemu-system-x86_64 -m 4G -drive if=ide,index=0,media=disk,file=win10.qcow2 \
-boot order=c \
-serial stdio -netdev user,id=n0 -device rtl8139,netdev=n0
- Create growable harddisk image of 80 GB:
qemu-img create -f qcow2 win11.qcow2 80G
- Start install from win11.iso
Edit start.sh and set it executeable chmod +x start.sh, here -m 4G is 4 GB RAM, -usbdevice tablet makes using mouse more exact:
qemu-system-x86_64 -hda win11.qcow2 -cdrom win11.iso -boot d \
-smp 2 -m 4G -usbdevice tablet \
-serial stdio -netdev user,id=n0 -device rtl8139,netdev=n0
- When installing Win11
a) Use bypass registry keys:
https://blogs.oracle.com/virtualization/post/install-microsoft-windows-11-on-virtualbox
b) Figure out UEFI and TPM and how to activate it, not tested:
- https://getlabsdone.com/how-to-install-windows-11-on-kvm/
- https://getlabsdone.com/how-to-enable-tpm-and-secure-boot-on-kvm/
- https://github.com/stefanberger/swtpm/wiki
- https://www.reddit.com/r/AsahiLinux/comments/y7hplo/virtual_machines_on_asahi_linux/
- https://that.guru/blog/uefi-secure-boot-in-libvirt/
- https://www.reddit.com/r/AsahiLinux/comments/107m4nb/windows_vm_on_asahi_qemukvm_virtmanager/
sudo apt-get install dh-autoreconf libssl-dev \
libtasn1-6-dev pkg-config libtpms-dev \
net-tools iproute2 libjson-glib-dev \
libgnutls28-dev expect gawk socat \
libseccomp-dev make -y
git clone https://github.com/stefanberger/swtpm
cd swtpm
./autogen.sh --with-openssl --prefix=/usr
make -j4
make -j4 check
sudo make install
- After install, boot without iso
qemu-system-x86_64 -hda win11.qcow2 -boot c \
-smp 2 -m 8G -usbdevice tablet \
-serial stdio -netdev user,id=n0 -device rtl8139,netdev=n0
- Create growable harddisk image of 80 GB:
qemu-img create -f qcow2 ubuntu.qcow2 80G
- Start install from ubuntu.iso
Edit start.sh and set it executeable chmod +x start.sh, here -m 4G is 4 GB RAM:
qemu-system-x86_64 -m 4G -drive if=ide,index=0,media=disk,file=ubuntu.qcow2 \
-drive if=ide,index=2,media=cdrom,file=ubuntu.iso -boot order=d \
-serial stdio -netdev user,id=n0 -device rtl8139,netdev=n0
- After install, boot without iso
qemu-system-x86_64 -m 4G -drive if=ide,index=0,media=disk,file=ubuntu.qcow2 \
-boot order=c \
-serial stdio -netdev user,id=n0 -device rtl8139,netdev=n0
Wiki for the Asahi Linux project: https://asahilinux.org/