add new messages

docs/cli/zetacored/zetacored_tx_fungible_update-zrc20-paused-status.md

@@ -0,0 +1,59 @@
+# tx fungible update-zrc20-paused-status
+
+Broadcast message UpdateZRC20PausedStatus
+
+```
+zetacored tx fungible update-zrc20-paused-status [contractAddress1, contractAddress2, ...] [pausedStatus] [flags]
+```
+
+### Examples
+
+```
+zetacored tx fungible update-zrc20-paused-status "0xece40cbB54d65282c4623f141c4a8a0bE7D6AdEc, 0xece40cbB54d65282c4623f141c4a8a0bEjgksncf" 0 
+```
+
+### Options
+
+```
+  -a, --account-number uint      The account number of the signing account (offline mode only)
+      --aux                      Generate aux signer data instead of sending a tx
+  -b, --broadcast-mode string    Transaction broadcasting mode (sync|async) 
+      --chain-id string          The network chain ID
+      --dry-run                  ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
+      --fee-granter string       Fee granter grants fees for the transaction
+      --fee-payer string         Fee payer pays fees for the transaction instead of deducting from the signer
+      --fees string              Fees to pay along with transaction; eg: 10uatom
+      --from string              Name or address of private key with which to sign
+      --gas string               gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
+      --gas-adjustment float     adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored  (default 1)
+      --gas-prices string        Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
+      --generate-only            Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
+  -h, --help                     help for update-zrc20-paused-status
+      --keyring-backend string   Select keyring's backend (os|file|kwallet|pass|test|memory) 
+      --keyring-dir string       The client Keyring directory; if omitted, the default 'home' directory will be used
+      --ledger                   Use a connected Ledger device
+      --node string              [host]:[port] to tendermint rpc interface for this chain 
+      --note string              Note to add a description to the transaction (previously --memo)
+      --offline                  Offline mode (does not allow any online functionality)
+  -o, --output string            Output format (text|json) 
+  -s, --sequence uint            The sequence number of the signing account (offline mode only)
+      --sign-mode string         Choose sign mode (direct|amino-json|direct-aux), this is an advanced feature
+      --timeout-height uint      Set a block timeout height to prevent the tx from being committed past a certain height
+      --tip string               Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
+  -y, --yes                      Skip tx broadcasting prompt confirmation
+```
+
+### Options inherited from parent commands
+
+```
+      --home string         directory for config and data 
+      --log_format string   The logging format (json|plain) 
+      --log_level string    The logging level (trace|debug|info|warn|error|fatal|panic) 
+      --log_no_color        Disable colored logs
+      --trace               print out full stack trace on errors
+```
+
+### SEE ALSO
+
+* [zetacored tx fungible](zetacored_tx_fungible.md)	 - fungible transactions subcommands
+

docs/cli/zetacored/zetacored_tx_observer_disable-cctx-flags.md

@@ -0,0 +1,53 @@
+# tx observer disable-cctx-flags
+
+Disable inbound and outbound cross-chain flags
+
+```
+zetacored tx observer disable-cctx-flags [disable-inbound] [disable-outbound] [flags]
+```
+
+### Options
+
+```
+  -a, --account-number uint      The account number of the signing account (offline mode only)
+      --aux                      Generate aux signer data instead of sending a tx
+  -b, --broadcast-mode string    Transaction broadcasting mode (sync|async) 
+      --chain-id string          The network chain ID
+      --dry-run                  ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
+      --fee-granter string       Fee granter grants fees for the transaction
+      --fee-payer string         Fee payer pays fees for the transaction instead of deducting from the signer
+      --fees string              Fees to pay along with transaction; eg: 10uatom
+      --from string              Name or address of private key with which to sign
+      --gas string               gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
+      --gas-adjustment float     adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored  (default 1)
+      --gas-prices string        Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
+      --generate-only            Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
+  -h, --help                     help for disable-cctx-flags
+      --keyring-backend string   Select keyring's backend (os|file|kwallet|pass|test|memory) 
+      --keyring-dir string       The client Keyring directory; if omitted, the default 'home' directory will be used
+      --ledger                   Use a connected Ledger device
+      --node string              [host]:[port] to tendermint rpc interface for this chain 
+      --note string              Note to add a description to the transaction (previously --memo)
+      --offline                  Offline mode (does not allow any online functionality)
+  -o, --output string            Output format (text|json) 
+  -s, --sequence uint            The sequence number of the signing account (offline mode only)
+      --sign-mode string         Choose sign mode (direct|amino-json|direct-aux), this is an advanced feature
+      --timeout-height uint      Set a block timeout height to prevent the tx from being committed past a certain height
+      --tip string               Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
+  -y, --yes                      Skip tx broadcasting prompt confirmation
+```
+
+### Options inherited from parent commands
+
+```
+      --home string         directory for config and data 
+      --log_format string   The logging format (json|plain) 
+      --log_level string    The logging level (trace|debug|info|warn|error|fatal|panic) 
+      --log_no_color        Disable colored logs
+      --trace               print out full stack trace on errors
+```
+
+### SEE ALSO
+
+* [zetacored tx observer](zetacored_tx_observer.md)	 - observer transactions subcommands
+

docs/cli/zetacored/zetacored_tx_observer_enable-cctx-flags.md

@@ -0,0 +1,53 @@
+# tx observer enable-cctx-flags
+
+Enable inbound and outbound cross-chain flags
+
+```
+zetacored tx observer enable-cctx-flags [enable-inbound] [enable-outbound] [flags]
+```
+
+### Options
+
+```
+  -a, --account-number uint      The account number of the signing account (offline mode only)
+      --aux                      Generate aux signer data instead of sending a tx
+  -b, --broadcast-mode string    Transaction broadcasting mode (sync|async) 
+      --chain-id string          The network chain ID
+      --dry-run                  ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
+      --fee-granter string       Fee granter grants fees for the transaction
+      --fee-payer string         Fee payer pays fees for the transaction instead of deducting from the signer
+      --fees string              Fees to pay along with transaction; eg: 10uatom
+      --from string              Name or address of private key with which to sign
+      --gas string               gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
+      --gas-adjustment float     adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored  (default 1)
+      --gas-prices string        Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
+      --generate-only            Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
+  -h, --help                     help for enable-cctx-flags
+      --keyring-backend string   Select keyring's backend (os|file|kwallet|pass|test|memory) 
+      --keyring-dir string       The client Keyring directory; if omitted, the default 'home' directory will be used
+      --ledger                   Use a connected Ledger device
+      --node string              [host]:[port] to tendermint rpc interface for this chain 
+      --note string              Note to add a description to the transaction (previously --memo)
+      --offline                  Offline mode (does not allow any online functionality)
+  -o, --output string            Output format (text|json) 
+  -s, --sequence uint            The sequence number of the signing account (offline mode only)
+      --sign-mode string         Choose sign mode (direct|amino-json|direct-aux), this is an advanced feature
+      --timeout-height uint      Set a block timeout height to prevent the tx from being committed past a certain height
+      --tip string               Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
+  -y, --yes                      Skip tx broadcasting prompt confirmation
+```
+
+### Options inherited from parent commands
+
+```
+      --home string         directory for config and data 
+      --log_format string   The logging format (json|plain) 
+      --log_level string    The logging level (trace|debug|info|warn|error|fatal|panic) 
+      --log_no_color        Disable colored logs
+      --trace               print out full stack trace on errors
+```
+
+### SEE ALSO
+
+* [zetacored tx observer](zetacored_tx_observer.md)	 - observer transactions subcommands
+

docs/cli/zetacored/zetacored_tx_observer_update-gas-price-increase-flags.md

@@ -0,0 +1,53 @@
+# tx observer update-gas-price-increase-flags
+
+Enable inbound and outbound cross-chain flags
+
+```
+zetacored tx observer update-gas-price-increase-flags [epochLength] [retryInterval] [gasPriceIncreasePercent] [gasPriceIncreaseMax] [maxPendingCctxs] [flags]
+```
+
+### Options
+
+```
+  -a, --account-number uint      The account number of the signing account (offline mode only)
+      --aux                      Generate aux signer data instead of sending a tx
+  -b, --broadcast-mode string    Transaction broadcasting mode (sync|async) 
+      --chain-id string          The network chain ID
+      --dry-run                  ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it (when enabled, the local Keybase is not accessible)
+      --fee-granter string       Fee granter grants fees for the transaction
+      --fee-payer string         Fee payer pays fees for the transaction instead of deducting from the signer
+      --fees string              Fees to pay along with transaction; eg: 10uatom
+      --from string              Name or address of private key with which to sign
+      --gas string               gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically. Note: "auto" option doesn't always report accurate results. Set a valid coin value to adjust the result. Can be used instead of "fees". (default 200000)
+      --gas-adjustment float     adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored  (default 1)
+      --gas-prices string        Gas prices in decimal format to determine the transaction fee (e.g. 0.1uatom)
+      --generate-only            Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase only accessed when providing a key name)
+  -h, --help                     help for update-gas-price-increase-flags
+      --keyring-backend string   Select keyring's backend (os|file|kwallet|pass|test|memory) 
+      --keyring-dir string       The client Keyring directory; if omitted, the default 'home' directory will be used
+      --ledger                   Use a connected Ledger device
+      --node string              [host]:[port] to tendermint rpc interface for this chain 
+      --note string              Note to add a description to the transaction (previously --memo)
+      --offline                  Offline mode (does not allow any online functionality)
+  -o, --output string            Output format (text|json) 
+  -s, --sequence uint            The sequence number of the signing account (offline mode only)
+      --sign-mode string         Choose sign mode (direct|amino-json|direct-aux), this is an advanced feature
+      --timeout-height uint      Set a block timeout height to prevent the tx from being committed past a certain height
+      --tip string               Tip is the amount that is going to be transferred to the fee payer on the target chain. This flag is only valid when used with --aux, and is ignored if the target chain didn't enable the TipDecorator
+  -y, --yes                      Skip tx broadcasting prompt confirmation
+```
+
+### Options inherited from parent commands
+
+```
+      --home string         directory for config and data 
+      --log_format string   The logging format (json|plain) 
+      --log_level string    The logging level (trace|debug|info|warn|error|fatal|panic) 
+      --log_no_color        Disable colored logs
+      --trace               print out full stack trace on errors
+```
+
+### SEE ALSO
+
+* [zetacored tx observer](zetacored_tx_observer.md)	 - observer transactions subcommands
+