SSL Tutorial
wolfSSL User Manual - Chapter 11
11.2 - Quick Summary of SSL/TLS
11.3 - Getting the Source Code
11.4 - Base Example Modifications
11.5 - Building and Installing wolfSSL
11.11 - Sending/Receiving Data
The wolfSSL (formerly CyaSSL) embedded SSL library can easily be integrated into your existing application or device to provide enhanced communication security through the addition of SSL and TLS. wolfSSL has been targeted at embedded and RTOS environments, and as such, offers a minimal footprint while maintaining excellent performance. Minimum build sizes for wolfSSL range between 20-100kB depending on the selected build options and platform being used.
The goal of this tutorial is to walk through the integration of SSL and TLS into a simple application. Hopefully the process of going through this tutorial will also lead to a better understanding of SSL in general. This tutorial uses wolfSSL in conjunction with simple echoserver and echoclient examples to keep things as simple as possible while still demonstrating the general procedure of adding SSL support to an application. The echoserver and echoclient examples have been taken from the popular book titled “Unix Network Programming, Volume 1, 3rd Edition” by Richard Stevens, Bill Fenner, and Andrew Rudoff.
This tutorial assumes that the reader is comfortable with editing and compiling C code using the GNU GCC compiler as well as familiar with the concepts of public key encryption. Please note that access to the Unix Network Programming book is not required for this tutorial.
Examples Used in this Tutorial
echoclient - Figure 5.4, Page 124
echoserver - Figure 5.12, Page 139
Unix Network Programming
Volume 1, 3rd Edition
TLS (Transport Layer Security) and SSL (Secure Sockets Layer) are cryptographic protocols that allow for secure communication across a number of different transport protocols. The primary transport protocol used is TCP/IP. The most recent version of SSL/TLS is TLS 1.2. wolfSSL supports SSL 3.0, TLS 1.0, 1.1, and 1.2 in addition to DTLS 1.0 and 1.2.
SSL and TLS sit between the Transport and Application layers of the OSI model, where any number of protocols (including TCP/IP, Bluetooth, etc.) may act as the underlying transport medium. Application protocols are layered on top of SSL and can include protocols such as HTTP, FTP, and SMTP. A diagram of how SSL fits into the OSI model, as well as a simple diagram of the SSL handshake process can be found in Appendix A.
All of the source code used in this tutorial can be downloaded from the wolfSSL website, specifically from the following location. The download contains both the original and completed source code for both the echoserver and echoclient used in this tutorial. Specific contents are listed below the link.
http://www.wolfssl.com/documentation/ssl-tutorial-2.2.zip
The downloaded ZIP file has the following structure:
/finished_src
/echoclient (Completed echoclient code)
/echoserver (Completed echoserver code)
/include (Modified unp.h)
/lib (Library functions)
/original_src
/echoclient (Starting echoclient code)
/echoserver (Starting echoserver code)
/include (Modified unp.h)
/lib (Library functions)
README
In addition, all of the source code can be obtained through a git-clone command, shown below:
$ git clone https://github.com/wolfSSL/wolfssl.gitThe wolfSSL GitHub repository has the same structure as the zip file above.
This tutorial, and the source code that accompanies it, have been designed to be as portable as possible across platforms. Because of this, and because we want to focus on how to add SSL and TLS into an application, the base examples have been kept as simple as possible. Several modifications have been made to the examples taken from Unix Network Programming in order to either remove unnecessary complexity or increase the range of platforms supported. If you believe there is something we could do to increase the portability of this tutorial, please let us know at [email protected].
The following is a list of modifications that were made to the original echoserver and echoclient examples found in the above listed book.
-
Removed call to the Fork() function because fork() is not supported by Windows. The result of this is an echoserver which only accepts one client simultaneously. Along with this removal, Signal handling was removed.
-
Moved str_echo() function from str_echo.c file into tcpserv04.c file
-
Added a printf statement to view the client address and the port we have connected through:
printf("Connection from %s, port %d\n",
inet_ntop(AF_INET, &cliaddr.sin_addr, buff, sizeof(buff)),
ntohs(cliaddr.sin_port));-
Added a call to setsockopt() after creating the listening socket to eliminate the “Address already in use” bind error.
-
Minor adjustments to clean up newer compiler warnings
-
Moved str_cli() function from str_cli.c file into tcpcli01.c file
-
Minor adjustments to clean up newer compiler warnings
- This header was simplified to contain only what is needed for this example.
Please note that in these source code examples, certain functions will be capitalized. For example, Fputs() and Writen(). The authors of Unix Network Programming have written custom wrapper functions for normal functions in order to cleanly handle error checking. For a more thorough explanation of this, please see Section 1.4 (page 11) in the Unix Network Programming book.
Before we begin, download the example code (echoserver and echoclient) from the Getting the Source Code section, above. This section will explain how to download, configure, and install the wolfSSL embedded SSL library on your system.
You will need to download and install the most recent version of wolfSSL from the wolfSSL download page (or through a git-clone).
For a full list of available build options, see the Building wolfSSL guide. wolfSSL was written with portability in mind, and should generally be easy to build on most systems. If you have difficulty building wolfSSL, please feel free to ask for support on the wolfSSL product support forums.
When building wolfSSL on Linux, *BSD, OS X, Solaris, or other *nix like systems, you can use the autoconf system. For windows-specific instructions, please refer to the Building wolfSSL section of the wolfSSL Manual. To configure and build wolfSSL, run the following two commands from the terminal. Any desired build options may be appended to ./configure (ex: ./configure –enable-opensslextra):
$ ./configure
$ makeTo install wolfSSL, run:
$ sudo make installThis will install wolfSSL headers into /usr/local/include/wolfssl and the wolfSSL libraries into /usr/local/lib on your system. To test the build, run the testsuite application from the wolfSSL root directory:
$ ./testsuite/testsuite.testA set of tests will be run on wolfCrypt and wolfSSL to verify it has been installed correctly. After a successful run of the testsuite application, you should see output similar to the following:
MD5 test passed!
SHA test passed!
SHA-224 test passed!
SHA-256 test passed!
SHA-384 test passed!
SHA-512 test passed!
HMAC-MD5 test passed!
HMAC-SHA test passed!
HMAC-SHA224 test passed!
HMAC-SHA256 test passed!
HMAC-SHA384 test passed!
HMAC-SHA512 test passed!
GMAC test passed!
Chacha test passed!
POLY1305 test passed!
ChaCha20-Poly1305 AEAD test passed!
AES test passed!
AES-GCM test passed!
RANDOM test passed!
RSA test passed!
DH test passed!
ECC test passed!
SSL version is TLSv1.2
SSL cipher suite is TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
SSL version is TLSv1.2
SSL cipher suite is TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
Client message: hello wolfssl!
Server response: I hear you fa shizzle!
sending server shutdown command: quit!
client sent quit command: shutting down!
ciphers = DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA:ECDHE-RSA-AES128-SHA:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-CHACHA20-POLY1305:DHE-RSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305-OLD:ECDHE-ECDSA-CHACHA20-POLY1305-OLD:DHE-RSA-CHACHA20-POLY1305-OLD
33bc1a4570f4f1abccd5c48aace529b01a42ab51293954a297796e90d20970f0 input
33bc1a4570f4f1abccd5c48aace529b01a42ab51293954a297796e90d20970f0 /tmp/output-N0Xq9c
All tests passed!
Now that wolfSSL has been installed, we can begin modifying the example code to add SSL functionality. We will first begin by adding SSL to the echoclient and subsequently move on to the echoserver.
To compile and run the example echoclient and echoserver code from the SSL Tutorial source bundle, you can use the included Makefiles. Change directory (cd) to either the echoclient or echoserver directory and run:
$ makeThis will compile the example code and produce an executable named either echoserver or echoclient depending on which one is being built. The GCC command which is used in the Makefile can be seen below. If you want to build one of the examples without using the supplied Makefile, change directory to the example directory and replace tcpcli01.c (echoclient) or tcpserv04.c (echoserver) in the following command with correct source file for the example:
$ gcc -o echoserver ../lib/*.c tcpserv04.c -I ../includeThis will compile the current example into an executable, creating either an “echoserver” or “echoclient” application. To run one of the examples after it has been compiled, change your current directory to the desired example directory and start the application. For example, to start the echoserver use:
$ ./echoserverYou may open a second terminal window to test the echoclient on your local host and you will need to supply the IP address of the server when starting the application, which in our case will be 127.0.0.1. Change your current directory to the “echoclient” directory and run the following command. Note that the echoserver must already be running:
$ ./echoclient 127.0.0.1Once you have both the echoserver and echoclient running, the echoserver should echo back any input that it receives from the echoclient. To exit either the echoserver or echoclient, use [Ctrl + C] to quit the application. Currently, the data being echoed back and forth between these two examples is being sent in the clear - easily allowing anyone with a little bit of skill to inject themselves in between the client and server and listen to your communication.
The wolfSSL library, once compiled, is named libwolfssl, and unless otherwise configured the wolfSSL build and install process creates only a shared library under the following directory. Both shared and static libraries may be enabled or disabled by using the appropriate build options:
/usr/local/lib
The first step we need to do is link the wolfSSL library to our example applications. Modifying the GCC command (using the echoserver as an example), gives us the following new command. Since wolfSSL installs header files and libraries in standard locations, the compiler should be able to find them without explicit instructions (using -l or -L). Note that by using -lwolfssl the compiler will automatically choose the correct type of library (static or shared):
$ gcc -o echoserver ../lib/*.c tcpserv04.c -I ../include -lm -lwolfsslThe first thing we will need to do is include the wolfSSL native API header in both the client and the server. In the tcpcli01.c file for the client and the tcpserv04.c file for the server add the following line near the top:
#include <wolfssl/ssl.h>Before we can use wolfSSL in our code, we need to initialize the library and the WOLFSSL_CTX. wolfSSL is initialized by calling wolfSSL_Init(). This must be done first before anything else can be done with the library.
The WOLFSSL_CTX structure (wolfSSL Context) contains global values for each SSL connection, including certificate information. A single WOLFSSL_CTX can be used with any number of WOLFSSL objects created. This allows us to load certain information, such as a list of trusted CA certificates only once.
To create a new WOLFSSL_CTX, use wolfSSL_CTX_new(). This function requires an argument which defines the SSL or TLS protocol for the client or server to use. There are several options for selecting the desired protocol. wolfSSL currently supports SSL 3.0, TLS 1.0, TLS 1.1, TLS 1.2, DTLS 1.0, and DTLS 1.2. Each of these protocols have a corresponding function that can be used as an argument to wolfSSL_CTX_new(). The possible client and server protocol options are shown below. SSL 2.0 is not supported by wolfSSL because it has been insecure for several years.
wolfSSLv3_client_method(); // SSL 3.0
wolfTLSv1_client_method(); // TLS 1.0
wolfTLSv1_1_client_method(); // TLS 1.1
wolfTLSv1_2_client_method(); // TLS 1.2
wolfSSLv23_client_method(); // Use highest version possible from
// SSLv3 - TLS 1.2
wolfDTLSv1_client_method(); // DTLS 1.0
wolfDTLSv1_2_client_method(); // DTLS 1.2
wolfSSLv3_server_method(); // SSLv3
wolfTLSv1_server_method(); // TLSv1
wolfTLSv1_1_server_method(); // TLSv1.1
wolfTLSv1_2_server_method(); // TLSv1.2
wolfSSLv23_server_method(); // Allow clients to connect with
// TLSv1+
wolfDTLSv1_server_method(); // DTLS
wolfDTLSv1_2_server_method(); // DTLS 1.2
We need to load our CA (Certificate Authority) certificate into the WOLFSSL_CTX so that the when the echoclient connects to the echoserver, it is able to verify the server’s identity. To load the CA certificates into the WOLFSSL_CTX, use wolfSSL_CTX_load_verify_locations(). This function requires three arguments: a WOLFSSL_CTX pointer, a certificate file, and a path value. The path value points to a directory which should contain CA certificates in PEM format. When looking up certificates, wolfSSL will look at the certificate file value before looking in the path location. In this case, we don’t need to specify a certificate path because we will specify one CA file - as such we use the value 0 for the path argument. The wolfSSL_CTX_load_verify_locations function returns either SSL_SUCCESS or SSL_FAILURE:
wolfSSL_CTX_load_verify_locations(WOLFSSL_CTX* ctx, const char* file, const char* path)Putting these things together (library initialization, protocol selection, and CA certificate), we have the following. Here, we choose to use TLS 1.2:
WOLFSSL_CTX* ctx;
wolfSSL_Init();/* Initialize wolfSSL */
/* Create the WOLFSSL_CTX */
if ( (ctx = wolfSSL_CTX_new(wolfTLSv1_2_client_method())) == NULL){
fprintf(stderr, "wolfSSL_CTX_new error.\n");
exit(EXIT_FAILURE);
}
/* Load CA certificates into WOLFSSL_CTX */
if (wolfSSL_CTX_load_verify_locations(ctx,"../certs/ca-cert.pem",0) !=
SSL_SUCCESS) {
fprintf(stderr, "Error loading ../certs/ca-cert.pem, please check
the file.\n");
exit(EXIT_FAILURE);
}When loading certificates into the WOLFSSL_CTX, the server certificate and key file should be loaded in addition to the CA certificate. This will allow the server to send the client its certificate for identification verification:
WOLFSSL_CTX* ctx;
wolfSSL_Init();/* Initialize wolfSSL */
/* Create the WOLFSSL_CTX */
if ( (ctx = wolfSSL_CTX_new(wolfTLSv1_2_server_method())) == NULL){
fprintf(stderr, "wolfSSL_CTX_new error.\n");
exit(EXIT_FAILURE);
}
/* Load CA certificates into CYASSL_CTX */
if (wolfSSL_CTX_load_verify_locations(ctx, "../certs/ca-cert.pem", 0) !=
SSL_SUCCESS) {
fprintf(stderr, "Error loading ../certs/ca-cert.pem, "
"please check the file.\n");
exit(EXIT_FAILURE);
}
/* Load server certificates into WOLFSSL_CTX */
if (wolfSSL_CTX_use_certificate_file(ctx,"../certs/server-cert.pem",
SSL_FILETYPE_PEM) != SSL_SUCCESS){
fprintf(stderr, "Error loading ../certs/server-cert.pem, please
check the file.\n");
exit(EXIT_FAILURE);
}
/* Load keys */
if (wolfSSL_CTX_use_PrivateKey_file(ctx,"../certs/server-key.pem",
SSL_FILETYPE_PEM) != SSL_SUCCESS){
fprintf(stderr, "Error loading ../certs/server-key.pem, please check
the file.\n");
exit(EXIT_FAILURE);
}The code shown above should be added to the beginning of tcpcli01.c and tcpserv04.c, after both the variable definitions and the check that the user has started the client with an IP address (client). A version of the finished code is included in the SSL tutorial ZIP file for reference.
Now that wolfSSL and the WOLFSSL_CTX have been initialized, make sure that the WOLFSSL_CTX object and the wolfSSL library are freed when the application is completely done using SSL/TLS. In both the client and the server, the following two lines should be placed at the end of the main() function (in the client right before the call to exit() ):
wolfSSL_CTX_free(ctx);
wolfSSL_Cleanup();A WOLFSSL object needs to be created after each TCP Connect and the socket file descriptor needs to be associated with the session. In the echoclient example, we will do this after the call to Connect(), shown below:
/* Connect to socket file descriptor */
Connect(sockfd, (SA *) &servaddr, sizeof(servaddr));Directly after connecting, create a new WOLFSSL object using the wolfSSL_new() function. This function returns a pointer to the WOLFSSL object if successful or NULL in the case of failure. We can then associate the socket file descriptor (sockfd) with the new WOLFSSL object (ssl):
/* Create WOLFSSL object */
WOLFSSL* ssl;
if( (ssl = wolfSSL_new(ctx)) == NULL) {
fprintf(stderr, "wolfSSL_new error.\n");
exit(EXIT_FAILURE);
}
wolfSSL_set_fd(ssl, sockfd);One thing to notice here is we haven’t made a call to the wolfSSL_connect() function. wolfSSL_connect() initiates the SSL/TLS handshake with the server, and is called during wolfSSL_read() if it hasn’t been called previously. In our case, we don’t explicitly call wolfSSL_connect(), as we let our first wolfSSL_read() do it for us.
At the end of the for loop in the main method, insert the WOLFSSL object and associate the socket file descriptor (connfd) with the WOLFSSL object (ssl), just as with the client:
/* Create WOLFSSL object */
WOLFSSL* ssl;
if ( (ssl = wolfSSL_new(ctx)) == NULL) {
fprintf(stderr, "wolfSSL_new error.\n");
exit(EXIT_FAILURE);
}
wolfSSL_set_fd(ssl, connfd); A WOLFSSL object needs to be created after each TCP Connect and the socket file descriptor needs to be associated with the session.
Create a new WOLFSSL object using the wolfSSL_new() function. This function returns a pointer to the WOLFSSL object if successful or NULL in the case of failure. We can then associate the socket file descriptor (sockfd) with the new WOLFSSL object (ssl):
/* Create WOLFSSL object */
WOLFSSL* ssl;
if( (ssl = wolfSSL_new(ctx)) == NULL) {
fprintf(stderr, "wolfSSL_new error.\n");
exit(EXIT_FAILURE);
}
wolfSSL_set_fd(ssl, sockfd);The next step is to begin sending data securely. Take note that in the echoclient example, the main() function hands off the sending and receiving work to str_cli(). The str_cli() function is where our function replacements will be made. First we need access to our WOLFSSL object in the str_cli() function, so we add another argument and pass the ssl variable to str_cli(). Because the WOLFSSL object is now going to be used inside of the str_cli() function, we remove the sockfd parameter. The new str_cli() function signature after this modification is shown below:
void str_cli(FILE *fp, WOLFSSL* ssl)In the main() function, the new argument (ssl) is passed to str_cli():
str_cli(stdin, ssl);Inside the str_cli() function, Writen() and Readline() are replaced with calls to wolfSSL_write() and wolfSSL_read() functions, and the WOLFSSL object (ssl) is used instead of the original file descriptor(sockfd). The new str_cli() function is shown below. Notice that we now need to check if our calls to wolfSSL_write and wolfSSL_read were successful.
The authors of the Unix Programming book wrote error checking into their Writen() function which we must make up for after it has been replaced. We add a new int variable, “n”, to monitor the return value of wolfSSL_read and before printing out the contents of the buffer, recvline, the end of our read data is marked with a ‘\0’:
void
str_cli(FILE *fp, WOLFSSL* ssl)
{
char sendline[MAXLINE], recvline[MAXLINE];
int n = 0;
while (Fgets(sendline, MAXLINE, fp) != NULL) {
if(wolfSSL_write(ssl, sendline, strlen(sendline)) !=
strlen(sendline)){
err_sys("wolfSSL_write failed");
}
if ((n = wolfSSL_read(ssl, recvline, MAXLINE)) <= 0)
err_quit("wolfSSL_read error");
recvline[n] = '\0';
Fputs(recvline, stdout);
}
}The last thing to do is free the WOLFSSL object when we are completely done with it. In the main() function, right before the line to free the WOLFSSL_CTX, call to wolfSSL_free():
str_cli(stdin, ssl);
wolfSSL_free(ssl); /* Free WOLFSSL object */
wolfSSL_CTX_free(ctx); /* Free WOLFSSL_CTX object */
wolfSSL_Cleanup(); /* Free wolfSSL */The echo server makes a call to str_echo() to handle reading and writing (whereas the client made a call to str_cli()). As with the client, modify str_echo() by replacing the sockfd parameter with a WOLFSSL object (ssl) parameter in the function signature:
void str_echo(WOLFSSL* ssl)Replace the calls to Read() and Writen() with calls to the wolfSSL_read() and wolfSSL_write() functions. The modified str_echo() function, including error checking of return values, is shown below. Note that the type of the variable “n” has been changed from ssize_t to int in order to accommodate for the change from read() to wolfSSL_read():
void
str_echo(WOLFSSL* ssl)
{
int n;
char buf[MAXLINE];
while ( (n = wolfSSL_read(ssl, buf, MAXLINE)) > 0) {
if(wolfSSL_write(ssl, buf, n) != n) {
err_sys("wolfSSL_write failed");
}
}
if( n < 0 )
printf("wolfSSL_read error = %d\n", wolfSSL_get_error(ssl,n));
else if( n == 0 )
printf("The peer has closed the connection.\n");
}In main() call the str_echo() function at the end of the for loop (soon to be changed to a while loop). After this function, inside the loop, make calls to free the WOLFSSL object and close the connfd socket:
str_echo(ssl); /* process the request */
wolfSSL_free(ssl); /* Free WOLFSSL object */
Close(connfd);We will free the ctx and cleanup before the call to exit.
In the echoclient and echoserver, we will need to add a signal handler for when the user closes the app by using “Ctrl+C”. The echo server is continually running in a loop. Because of this, we need to provide a way to break that loop when the user presses “Ctrl+C”. To do this, the first thing we need to do is change our loop to a while loop which terminates when an exit variable (cleanup) is set to true.
First, define a new static int variable called cleanup at the top of tcpserv04.c right after the #include statements:
static int cleanup; /* To handle shutdown */Modify the echoserver loop by changing it from a for loop to a while loop:
while(cleanup != 1)
{
/* echo server code here */
}For the echoserver we need to disable the operating system from restarting calls which were being executed before the signal was handled after our handler has finished. By disabling these, the operating system will not restart calls to accept() after the signal has been handled. If we didn’t do this, we would have to wait for another client to connect and disconnect before the echoserver would clean up resources and exit. To define the signal handler and turn off SA_RESTART, first define act and oact structures in the echoserver’s main() function:
struct sigaction act, oact;Insert the following code after variable declarations, before the call to wolfSSL_Init() in the main function:
/* Signal handling code */
struct sigaction act, oact; /* Declare the sigaction structs */
act.sa_handler = sig_handler; /* Tell act to use sig_handler */
sigemptyset(&act.sa_mask); /* Tells act to exclude all sa_mask *
* signals during execution of *
* sig_handler. */
act.sa_flags = 0; /* States that act has a special *
* flag of 0 */
sigaction(SIGINT, &act, &oact); /* Tells the program to use (o)act *
* on a signal or interrupt */The echoserver’s sig_handler function is shown below:
void sig_handler(const int sig)
{
printf("\nSIGINT handled.\n");
cleanup = 1;
return;
}That’s it - the echoclient and echoserver are now enabled with TLSv1.2!!
What we did:
- Included the wolfSSL headers
- Initialized wolfSSL
- Created a WOLFSSL_CTX structure in which we chose what protocol we wanted to use
- Created a WOLFSSL object to use for sending and receiving data
- Replaced calls to Writen() and Readline() with wolfSSL_write() and wolfSSL_read()
- Freed WOLFSSL, WOLFSSL_CTX
- Made sure we handled client and server shutdown with signal handler
There are many more aspects and methods to configure and control the behavior of your SSL connections. For more detailed information, please see additional wolfSSL documentation and resources.
Once again, the completed source code can be found in the downloaded ZIP file at the top of this section.
For testing purposes, you may use the certificates provided by wolfSSL. These can be found in the wolfSSL download, and specifically for this tutorial, they can be found in the finished_src folder.
For production applications, you should obtain correct and legitimate certificates from a trusted certificate authority.
This tutorial walked through the process of integrating the wolfSSL embedded SSL library into a simple client and server application. Although this example is simple, the same principles may be applied for adding SSL or TLS into your own application. The wolfSSL embedded SSL library provides all the features you would need in a compact and efficient package that has been optimized for both size and speed.
Being dual licensed under GPLv2 and standard commercial licensing, you are free to download the wolfSSL source code directly from our website. Feel free to post to our support forums (www.wolfssl.com/forums) with any questions or comments you might have. If you would like more information about our products, please contact [email protected].
We welcome any feedback you have on this SSL tutorial. If you believe it could be improved or enhanced in order to make it either more useful, easier to understand, or more portable, please let us know at [email protected].
