IRIS

Toolbox for creating (color) vision experiments. It provides a library and tools with the aim to create simple visual experiments on color-calibrated monitors.

Building

Dependencies:

• OpenGL (e.g. mesa)
• OpenGL Mathematics
• glew
• HDF5
• C/C++ Minpack
• OpenBLAS
• LAPACK
• yaml cpp
• freetype
• cmake
• ninja (if you wanna build with ninja)

Install dependencies in Fedora:

dnf install glm-devel hdf5-devel cminpack-devel openblas-devel \
            yaml-cpp-devel hdf5-devel libglvnd-devel \
			freetype-devel cmake ninja-build

Configuring and building:

mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX:PATH=/usr -G Ninja ..
ninja

Usage - Tools

Command	Description
pr655	interface with the PR655 spectrometer
iris-measure	use calibration stimuli to measure spectra
iris-calibrate	use measured spectra to generated calibration
iris-cgen	generate color (-r, -g, -b) or white (-w) stimuli, in
	increments of N steps (-N) that repeat for (-B) blocks
iris-info	Show information about known monitors
iris-store	Show store information
iris-colorcircle	Display a (calibrated) colorcircle
iris-board	Display an animated (and color calibrated checkerboard
iris-isoslant	Measure iso-slant data for a single test subject
iris-fitiso	Use iso-slant data to generate per-subject calibration

Usage - Introduction

The fundamental idea of IRIS is to present stimuli on a display (iris::data::display) which is the virtual entity composed of the following concrete entities:

• physical monitor (iris::data::monitor)
• concrete settings of the monitor (brightness, contrast, …; represented by iris::data::settings)
• graphics card output (HMDI, DisplayPort)
• the mode of the monitor (resolution, color depth, …; represented by iris::data::monitor::mode)
• the graphics subsystem being used (currently only OpenGL)

The link between graphics card, monitor and graphics subsystem is configured via iris::data::link. To be able to use color accurately (in DKL space) a display needs to have valid calibration, i.e. iris::data::rgb2lms. Individual subjects can have varying iso-slants (iris::data::isoslant), so for each subject and display an additional iso-slant correction can be applied when displaying stimuli.

Usage - Store

The calibration and configuration data can be stored globally, /etc/iris, or locally per user at ~/.config/iris. The basic layout is the following:

[store root]
├── cones/                              # cone sensitivies data
│   └── [email protected]                   # SML data, starting 380nm, 4nm steps
├── default.font -> fonts/OpenSans.ttf  # link to default font
├── default.monitor -> monitors/eDP-1   # link to default monitor
├── fonts/                              # all fonts
├── links.cfg                           # output to monitor description
├── monitors/                           # all known montors
│   └── sony_gdmf520_77                 # example monitor
│       ├── 20150602.settings           # description of monitor settings (brightness, …)
│       ├── 20150602T1807.rgb2lms       # calibration data from spectra (`iris-calibrate`)
│       ├── 20150608T1549.cac           # calibration data like above, in hdf5 format
│       ├── sony_gdmf520_77.monitor     # description of the monitor (model, name, …)
│       └── spectra-20150617T1737.h5    # measured monitor spectra (`iris-measure`)
├── subjects/                           # registred subjects
│   └── tsubject                        # subject, "Test Subject" (tsubject)
│       ├── 20150827T1755.isodata       # measured isoslant data (`iris-isoslant`)
│       ├── 20150827T1755.isoslant      # isoslant calibration form isodata (`iris-fitiso`)
│       └── tsubject.subject            # subject description
└── version                             # store format version, currently "1.0\n"

Most measured data (*.cac, *.isodata, *.h5) are stored in the HDF5 format. The rest of the data is in YAML.

Usage - Calibration

We need to blacklist the cdc-acm kernel module that otherwise might be loaded and bind earlier. At least the PR655 needs the usbserial. This can be done by creatin a file called /etc/modprobe.d/pr665.conf with the following contents (see modprobe.conf(5)):

#PR655 should use usbserial
blacklist cdc-acm

The following set of commands will use the PR655 connected to /dev/ttyUSB0 to calibrate the screen of 395 mm width by 295 mm height.

iris-measure --device=/dev/ttyUSB0 calib.stim
iris-calibrate -W 395 -H 295 spectra-20150814T1522.h5