Skip to content

Commit

Permalink
[top_englishbreakfast] Add second UART
Browse files Browse the repository at this point in the history 
For penetration testing, we've been using a second UART on the CW310 and
the silicon platform and this commit adds a second UART to the English
Breakfast top level such that the capture setup can be re-aligned again
to simplify code maintenance.

Signed-off-by: Pirmin Vogel <[email protected]>
  • Loading branch information
@vogelpi
vogelpi committed Sep 19, 2024
1 parent c938040 commit 73035b7
Show file tree
Hide file tree
Showing 5 changed files with 31 additions and 18 deletions.
14 changes: 8 additions & 6 deletions hw/top_englishbreakfast/data/pins_cw305.xdc
View file
Original file line number Diff line number Diff line change
Expand Up @@ -38,29 +38,31 @@ set_property -dict { PACKAGE_PIN C6 IOSTANDARD LVCMOS33 PULLTYPE PULLDOWN } [get
set_property -dict { PACKAGE_PIN D6 IOSTANDARD LVCMOS33 PULLTYPE PULLDOWN } [get_ports { IOC8 }]; #USB_A18 (SAM3X)
set_property -dict { PACKAGE_PIN C4 IOSTANDARD LVCMOS33 PULLTYPE PULLDOWN } [get_ports { IOC5 }]; #USB_A19 (SAM3X)

# UART0
set_property -dict { PACKAGE_PIN A12 IOSTANDARD LVCMOS33 } [get_ports { IOC3 }]; #JP3.A12 - IO5 - OpenTitan UART0 RX
set_property -dict { PACKAGE_PIN B12 IOSTANDARD LVCMOS33 } [get_ports { IOC4 }]; #JP3.B12 - IO6 - OpenTitan UART0 TX

## OTHER IO
set_property -dict { PACKAGE_PIN B16 IOSTANDARD LVCMOS33 } [get_ports { IOA4 }]; #JP3.B16
set_property -dict { PACKAGE_PIN C13 IOSTANDARD LVCMOS33 } [get_ports { IOA5 }]; #JP3.C13
set_property -dict { PACKAGE_PIN D15 IOSTANDARD LVCMOS33 } [get_ports { IOA6 }]; #JP3.D15
set_property -dict { PACKAGE_PIN E15 IOSTANDARD LVCMOS33 } [get_ports { IOA7 }]; #JP3.E15
set_property -dict { PACKAGE_PIN E13 IOSTANDARD LVCMOS33 } [get_ports { IOB2 }]; #JP3.E13
set_property -dict { PACKAGE_PIN F15 IOSTANDARD LVCMOS33 } [get_ports { IOB3 }]; #JP3.F15
set_property -dict { PACKAGE_PIN E11 IOSTANDARD LVCMOS33 } [get_ports { IOB4 }]; #JP3.E11
set_property -dict { PACKAGE_PIN F13 IOSTANDARD LVCMOS33 } [get_ports { IOB5 }]; #JP3.F13
set_property -dict { PACKAGE_PIN A12 IOSTANDARD LVCMOS33 } [get_ports { IOB6 }]; #JP3.A12
set_property -dict { PACKAGE_PIN F13 IOSTANDARD LVCMOS33 } [get_ports { IOB6 }]; #JP3.F13

set_property -dict { PACKAGE_PIN C16 IOSTANDARD LVCMOS33 DRIVE 8 SLEW FAST } [get_ports { USB_P }]; #JP3.C16
set_property -dict { PACKAGE_PIN D13 IOSTANDARD LVCMOS33 DRIVE 8 SLEW FAST } [get_ports { USB_N }]; #JP3.D13
set_property -dict { PACKAGE_PIN H16 IOSTANDARD LVCMOS33 } [get_ports { IO_USB_DPPULLUP0 }]; #JP3.H16
set_property -dict { PACKAGE_PIN D16 IOSTANDARD LVCMOS33 } [get_ports { IO_USB_SENSE0 }]; #JP3.D16
set_property -dict { PACKAGE_PIN E16 IOSTANDARD LVCMOS33 } [get_ports { IO_USB_DNPULLUP0 }]; #JP3.E16

## Unused pins of JP3: B12, F12, G16
## Unused pins of JP3: E11, F12, G16

## 20-Pin Connector (JP1)

set_property -dict { PACKAGE_PIN R16 IOSTANDARD LVCMOS33 } [get_ports { IOC4 }]; #JP1 PIN 12 TIO2 - OpenTitan UART0 TX
set_property -dict { PACKAGE_PIN P16 IOSTANDARD LVCMOS33 } [get_ports { IOC3 }]; #JP1 PIN 10 TIO1 - OpenTitan UART0 RX
set_property -dict { PACKAGE_PIN R16 IOSTANDARD LVCMOS33 } [get_ports { IOB5 }]; #JP1 PIN 12 TIO2 - OpenTitan UART1 TX
set_property -dict { PACKAGE_PIN P16 IOSTANDARD LVCMOS33 } [get_ports { IOB4 }]; #JP1 PIN 10 TIO1 - OpenTitan UART1 RX
set_property -dict { PACKAGE_PIN T14 IOSTANDARD LVCMOS33 } [get_ports { IO_TRIGGER }]; #JP1 PIN 16 TIO4 - Capture Trigger
set_property -dict { PACKAGE_PIN M16 IOSTANDARD LVCMOS33 } [get_ports { IO_CLKOUT }]; #JP1 PIN 4 TIO_HS1 - Target clock

Expand Down
21 changes: 19 additions & 2 deletions hw/top_englishbreakfast/data/top_englishbreakfast.hjson
View file
Original file line number Diff line number Diff line change
Expand Up @@ -186,13 +186,28 @@
// the ip.hjson will declare the clock port names
// If none are defined at ip.hjson, clk_i is used by default
clock_srcs: {clk_i: "io_div4"},

clock_group: "peri",
// reset connections defines the port to top level reset connection
// the ip.hjson will declare the reset port names
// If none are defined at ip.hjson, rst_ni is used by default
reset_connections: {rst_ni: "sys_io_div4"},
reset_connections: {rst_ni: "lc_io_div4"},
base_addr: "0x40000000",
},
{ name: "uart1", // instance name
type: "uart", // Must be matched to the ip name in `ip.hson` (_reg, _cfg permitted)
// and `hw/ip/{type}`

// clock connections defines the port to top level clock connection
// the ip.hjson will declare the clock port names
// If none are defined at ip.hjson, clk_i is used by default
clock_srcs: {clk_i: "io_div4"},
clock_group: "peri",
// reset connections defines the port to top level reset connection
// the ip.hjson will declare the reset port names
// If none are defined at ip.hjson, rst_ni is used by default
reset_connections: {rst_ni: "lc_io_div4"},
base_addr: "0x40010000",
},
{ name: "gpio",
type: "gpio",
clock_srcs: {clk_i: "io_div4"},
Expand Down Expand Up @@ -681,6 +696,7 @@
// Modules whose interrupts are connected to RV_PLIC.
interrupt_module: [
"uart0",
"uart1",
"gpio",
"spi_device",
"spi_host0",
Expand Down Expand Up @@ -852,6 +868,7 @@
// MIOs
{ instance: "gpio", port: '', connection: 'muxed' , pad: '' , desc: ''},
{ instance: "uart0", port: '', connection: 'muxed' , pad: '' , desc: ''},
{ instance: "uart1", port: '', connection: 'muxed' , pad: '' , desc: ''},
{ instance: "flash_ctrl", port: '', connection: 'muxed' , pad: '' , desc: ''},
{ instance: 'usbdev', port: 'sense', connection: 'muxed' , pad: '' , desc: ''},
],
Expand Down
2 changes: 1 addition & 1 deletion sw/device/lib/testing/pinmux_testutils.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -37,7 +37,6 @@ void pinmux_testutils_init(dif_pinmux_t *pinmux) {
CHECK_DIF_OK(dif_pinmux_output_select(pinmux, kTopEarlgreyPinmuxMioOutIoc4,
kTopEarlgreyPinmuxOutselUart0Tx));

#if !OT_IS_ENGLISH_BREAKFAST
// Enable pull-ups on UART0 RX
// Pull-ups are available only on certain platforms.
if (kDeviceType == kDeviceSimDV) {
Expand All @@ -63,6 +62,7 @@ void pinmux_testutils_init(dif_pinmux_t *pinmux) {
CHECK_DIF_OK(dif_pinmux_output_select(pinmux, kTopEarlgreyPinmuxMioOutIob5,
kTopEarlgreyPinmuxOutselUart1Tx));

#if !OT_IS_ENGLISH_BREAKFAST
// Configure a higher drive strength for the USB_P and USB_N pads because we
// must the pad drivers must be capable of overpowering the 'pull' signal
// strength of the internal pull ups in the differential receiver.
Expand Down
4 changes: 2 additions & 2 deletions sw/device/lib/testing/test_framework/ottf_console.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -258,13 +258,13 @@ void ottf_console_configure_spi_device(uintptr_t base_addr) {
static uint32_t get_flow_control_watermark_plic_id(void) {
switch (kOttfTestConfig.console.base_addr) {
#if !OT_IS_ENGLISH_BREAKFAST
case TOP_EARLGREY_UART1_BASE_ADDR:
return kTopEarlgreyPlicIrqIdUart1RxWatermark;
case TOP_EARLGREY_UART2_BASE_ADDR:
return kTopEarlgreyPlicIrqIdUart2RxWatermark;
case TOP_EARLGREY_UART3_BASE_ADDR:
return kTopEarlgreyPlicIrqIdUart3RxWatermark;
#endif
case TOP_EARLGREY_UART1_BASE_ADDR:
return kTopEarlgreyPlicIrqIdUart1RxWatermark;
case TOP_EARLGREY_UART0_BASE_ADDR:
default:
return kTopEarlgreyPlicIrqIdUart0RxWatermark;
Expand Down
8 changes: 1 addition & 7 deletions sw/device/sca/lib/sca.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -67,12 +67,12 @@ enum {
static unsigned int trigger_bit_index = kTriggerHwGateBitIndex;

static dif_uart_t uart0;
static dif_uart_t uart1;
static dif_gpio_t gpio;
static dif_pinmux_t pinmux;
static dif_rv_timer_t timer;

#if !OT_IS_ENGLISH_BREAKFAST
static dif_uart_t uart1;
static dif_csrng_t csrng;
static dif_edn_t edn0;
static dif_edn_t edn1;
Expand Down Expand Up @@ -101,11 +101,9 @@ static void sca_init_uart(void) {
OT_DISCARD(dif_uart_configure(&uart0, uart_config));
base_uart_stdout(&uart0);

#if !OT_IS_ENGLISH_BREAKFAST
OT_DISCARD(dif_uart_init(mmio_region_from_addr(TOP_EARLGREY_UART1_BASE_ADDR),
&uart1));
OT_DISCARD(dif_uart_configure(&uart1, uart_config));
#endif
}

/**
Expand Down Expand Up @@ -286,11 +284,7 @@ void sca_init(sca_trigger_source_t trigger, sca_peripherals_t enable) {
}

const dif_uart_t *sca_get_uart(void) {
#if !OT_IS_ENGLISH_BREAKFAST
return &uart1;
#else
return &uart0;
#endif
}

void sca_select_trigger_type(sca_trigger_type_t trigger_type) {
Expand Down

0 comments on commit 73035b7

Please sign in to comment.