-
Notifications
You must be signed in to change notification settings - Fork 245
Menu options
Allows selection of different formats of the date line in idle screen. "Alt. format" shows the last destination id used in voice packets. "!" shows it was silent, not on speaker because id was not in rxlist
Allows listening to voice calls not in the rxlist.
Enables unstable, and otherwise unfinished features. This setting is reset every time the handset is turned on.
Enables output on the USB port. Consumes extra CPU power and thus battery charge.
Also enables system parts, that only produce output on the USB port.
Enables console style information screens, with internals from the handset. Controllable via hotkeys. Not always the same on each release.
Copies received TG (visible in Alt. format statusline) to the current TX TG. Allows any TG received during promiscuous mode to be temporary copied to the current contact. The copied TG persists, until the channel or zone is changed.
Clears syslog screen (netmon 3)
If USB logging is enabled, this will send syslog to dmesg (receivable via md380-tool dmesgtail)
Show normal idle screen. Also resets QSO popup. To allow menu access during QSO.
Show netmon screen 1
Show netmon screen 2
Show netmon screen 3. A list of radiopackets decoded:
- cs G 2046058->204 (= start of group call from 2046058 to 204)
- ce G 2046058->204 (= end of group call from 2046058 to 204)
- dh U 2043042->5057 (= datamessage from 2043042 to user 5057, which is the APRS gateway)