icm40609d: Add INTF register definition and disable I2C interface

Disable I2C to make sure that the sensor doesn't switch to that by accident Signed-off-by: Jukka Laitinen <[email protected]>
tiiuae · Aug 13, 2024 · e3da03e · e3da03e
1 parent 2256cf4
commit e3da03e
Show file tree

Hide file tree

Showing 2 changed files with 14 additions and 1 deletion.
diff --git a/src/drivers/imu/invensense/icm40609d/ICM40609D.hpp b/src/drivers/imu/invensense/icm40609d/ICM40609D.hpp
@@ -160,10 +160,11 @@ class ICM40609D : public device::SPI, public I2CSPIDriver<ICM40609D>
 	int32_t _fifo_gyro_samples{static_cast<int32_t>(_fifo_empty_interval_us / (1000000 / GYRO_RATE))};
 
 	uint8_t _checked_register_bank0{0};
-	static constexpr uint8_t size_register_bank0_cfg{10};
+	static constexpr uint8_t size_register_bank0_cfg{11};
 	register_bank0_config_t _register_bank0_cfg[size_register_bank0_cfg] {
 		// Register                        | Set bits, Clear bits
 		{ Register::BANK_0::INT_CONFIG,    INT_CONFIG_BIT::INT1_MODE | INT_CONFIG_BIT::INT1_DRIVE_CIRCUIT, INT_CONFIG_BIT::INT1_POLARITY },
+		{ Register::BANK_0::INTF_CONFIG0,  INTF_CONFIG0_BIT::UI_SIFS_CFG_DISABLE_I2C, 0},
 		{ Register::BANK_0::FIFO_CONFIG,   FIFO_CONFIG_BIT::FIFO_MODE_STOP_ON_FULL, 0 },
 		{ Register::BANK_0::PWR_MGMT0,     PWR_MGMT0_BIT::GYRO_MODE_LOW_NOISE | PWR_MGMT0_BIT::ACCEL_MODE_LOW_NOISE, 0 },
 		{ Register::BANK_0::GYRO_CONFIG0,  GYRO_CONFIG0_BIT::GYRO_ODR_8kHz, Bit7 | Bit6 | Bit5 | Bit3 | Bit2 },

diff --git a/src/drivers/imu/invensense/icm40609d/InvenSense_ICM40609D_registers.hpp b/src/drivers/imu/invensense/icm40609d/InvenSense_ICM40609D_registers.hpp
@@ -82,6 +82,8 @@ enum class BANK_0 : uint8_t {
 
 	SIGNAL_PATH_RESET = 0x4B,
 
+	INTF_CONFIG0      = 0x4C,
+
 	PWR_MGMT0         = 0x4E,
 	GYRO_CONFIG0      = 0x4F,
 	ACCEL_CONFIG0     = 0x50,
@@ -132,6 +134,16 @@ enum SIGNAL_PATH_RESET_BIT : uint8_t {
 	FIFO_FLUSH      = Bit1,
 };
 
+// INTF_CONFIG0
+enum INTF_CONFIG0_BIT : uint8_t {
+	FIFO_HOLD_LAST_DATA_EN = Bit7,
+	FIFO_COUNT_REC = Bit6,
+	FIFO_COUNT_ENDIAN = Bit5,
+	SENSOR_DATA_ENDIAN = Bit4,
+	UI_SIFS_CFG_DISABLE_SPI = Bit1,
+	UI_SIFS_CFG_DISABLE_I2C = Bit1 | Bit0
+};
+
 // PWR_MGMT0
 enum PWR_MGMT0_BIT : uint8_t {
 	GYRO_MODE_LOW_NOISE  = Bit3 | Bit2, // 11: Places gyroscope in Low Noise (LN) Mode