Misc cleanups

.cargo/config.toml

@@ -1,2 +1,13 @@
-[registries.crates-io]
-protocol = "sparse"
+[build]
+target = "x86_64-unknown-uefi"
+
+[target.x86_64-unknown-uefi]
+rustflags = [
+    "-Clink-arg=/heap:0,0",
+    "-Clink-arg=/stack:0,0",
+    "-Clink-arg=/dll",
+    "-Clink-arg=/base:0",
+    "-Clink-arg=/align:32",
+    "-Clink-arg=/filealign:32",
+    "-Clink-arg=/subsystem:efi_boot_service_driver"
+]

.github/workflows/ci.yml

@@ -13,7 +13,9 @@ jobs:
           submodules: true
 
       - name: Install dependencies
-        run: ./deps.sh
+        run: |
+          sudo apt install --yes make
+          rustup show
 
       - name: Build UEFI application
         run: make

Cargo.toml

@@ -8,16 +8,10 @@ license = "GPL-3.0-only"
 lto = true
 
 [dependencies]
-bitflags = "2.5.0"
-coreboot-table = { git = "https://gitlab.redox-os.org/redox-os/coreboot-table.git" }
 memoffset = "0.9"
 orbclient = { version = "0.3.46", default-features = false }
 orbfont = { version = "0.1.12", default-features = false, features = ["no-std"] }
-plain = "0.2.3"
-redox_dmi = "0.1.6"
-redox_hwio = { version = "0.1.6", default-features = false }
 redox_uefi_std = "0.1.13"
-spin = "0.9.4"
 
 [dependencies.system76_ectool]
 git = "https://github.com/system76/ec.git"
@@ -26,4 +20,3 @@ features = ["redox_hwio"]
 
 [features]
 default = []
-debug = []

Makefile

@@ -1,55 +1,26 @@
 # SPDX-License-Identifier: GPL-3.0-only
 
 TARGET = x86_64-unknown-uefi
-BUILD = build/$(TARGET)
+QEMU = qemu-system-x86_64
+OVMF = /usr/share/OVMF
 
-all: $(BUILD)/boot.efi
+.PHONY: build
+build:
+	cargo build --release
 
+.PHONY: clean
 clean:
 	cargo clean
-	rm -rf build
 
-update:
-	git submodule update --init --recursive --remote
-	cargo update
-
-$(BUILD)/OVMF_VARS.fd: /usr/share/OVMF/OVMF_VARS.fd
-	cp $< $@
-
-qemu: $(BUILD)/boot.img $(BUILD)/OVMF_VARS.fd
-	kvm -M q35 -m 1024 -net none -vga std $< \
-		-drive if=pflash,format=raw,readonly,file=/usr/share/OVMF/OVMF_CODE.fd \
-		-drive if=pflash,format=raw,file=$(BUILD)/OVMF_VARS.fd \
-		-chardev stdio,id=debug -device isa-debugcon,iobase=0x402,chardev=debug
-
-$(BUILD)/boot.img: $(BUILD)/efi.img
-	dd if=/dev/zero [email protected] bs=512 count=100352
-	parted [email protected] -s -a minimal mklabel gpt
-	parted [email protected] -s -a minimal mkpart EFI FAT16 2048s 93716s
-	parted [email protected] -s -a minimal toggle 1 boot
-	dd if=$< [email protected] bs=512 count=98304 seek=2048 conv=notrunc
-	mv [email protected] $@
-
-$(BUILD)/efi.img: $(BUILD)/boot.efi
-	dd if=/dev/zero [email protected] bs=512 count=98304
-	mkfs.vfat [email protected]
-	mmd -i [email protected] efi
-	mmd -i [email protected] efi/boot
-	mcopy -i [email protected] $< ::driver.efi
-	mcopy -i [email protected] res/startup.nsh ::startup.nsh
-	mv [email protected] $@
-
-$(BUILD)/boot.efi: Cargo.lock Cargo.toml res/* src/* src/*/*
-	mkdir -p $(BUILD)
-	cargo rustc \
-		--target $(TARGET) \
-		--release \
-		-- \
-		-C link-arg=/heap:0,0 \
-		-C link-arg=/stack:0,0 \
-		-C link-arg=/dll \
-		-C link-arg=/base:0 \
-		-C link-arg=/align:32 \
-		-C link-arg=/filealign:32 \
-		-C link-arg=/subsystem:efi_boot_service_driver \
-		--emit link=$@
+.PHONY: qemu
+qemu: build $(OVMF)/OVMF_VARS.fd $(OVMF)/OVMF_CODE.fd
+	cp $(OVMF)/OVMF_CODE.fd target/
+	cp $(OVMF)/OVMF_VARS.fd target/
+	$(QEMU) -enable-kvm -M q35 -m 1024 -vga std \
+		-chardev stdio,mux=on,id=debug \
+		-device isa-serial,index=2,chardev=debug \
+		-device isa-debugcon,iobase=0x402,chardev=debug \
+		-drive if=pflash,format=raw,readonly=on,file=target/OVMF_CODE.fd \
+		-drive if=pflash,format=raw,readonly=on,file=target/OVMF_VARS.fd \
+		-drive format=raw,file=fat:rw:target/$(TARGET) \
+		-net none

README.md

@@ -1,5 +1,21 @@
 # System76 Firmware Setup
 
-firmware-setup is a UEFI application that implements the user interface for
+firmware-setup is a UEFI driver that implements the user interface for
 System76 Open Firmware. It is basic by design, with its only functionality
 being selecting the boot device and changing the boot order.
+
+## Testing
+
+As a basic test, the driver can be loaded in QEMU to use the UI.
+
+```
+make qemu
+```
+
+In QEMU:
+
+```
+Shell> fs0:
+FS0:\> load release\system76_firmware_setup.efi
+FS0:\> exit
+```

firmware-setup.inf

@@ -1,18 +1,9 @@
 [Defines]
-  INF_VERSION                    = 0x00010005
+  INF_VERSION                    = 1.5
   BASE_NAME                      = system76-firmware-setup
   FILE_GUID                      = 76ff62c9-7915-4e98-b964-154524023fa7
   MODULE_TYPE                    = UEFI_DRIVER
   VERSION_STRING                 = 1.0
 
-  #
-  # The following information is for reference only and not required by the build tools.
-  #
-  #  VALID_ARCHITECTURES           = IA32 X64 IPF EBC
-  #
-
-  VALID_ARCHITECTURES           = X64
-
 [Binaries.X64]
-  PE32|build/x86_64-unknown-uefi/boot.efi|*
-
+  PE32|target/x86_64-unknown-uefi/release/system76_firmware_setup.efi|*

src/main.rs

@@ -13,7 +13,6 @@ use std::prelude::*;
 
 use core::ptr;
 
-mod coreboot;
 mod display;
 mod hii;
 pub mod image;
@@ -29,8 +28,6 @@ pub extern "C" fn main() -> Status {
 
     let _ = (uefi.BootServices.SetWatchdogTimer)(0, 0, 0, ptr::null());
 
-    coreboot::init();
-
     if let Err(err) = fde::Fde::install() {
         println!("Fde error: {:?}", err);
         let _ = key::key(true);