PMW3360 PCB

2.54mm Pin Header	0.5mm FFC/FPC

PixArt PMW3360DM-T2QU optical mouse sensor breakout board, can be operated with either a 1.8V or 3.3V voltage level.
Also look at PMW3610 PCB.

Demo video 1, Demo video 2

PCB

Online preview available here, powered by KiCanvas.

BOM

Ref	Value	Footprint
C1	4.7uF/10V	SMD 0603
C2	100nF	SMD 0603
C3	1uF	SMD 0603
C4*	1uF	SMD 0603
C5*	DNI	SMD 0603
R1*	DNI or 10kΩ	SMD 0603
R2	10kΩ	SMD 0603
R3	39Ω	SMD 0603
R4*	DNI	SMD 0603
U1	PMW3360	PMW3360DM-T2QU 16 Pin
U2*	TLV74318PDBVR	SOT-23-5
J1*	8 Pin

• DNI: don't install.
• SMD 0603 (Imperial) aka 1608 Metric.
• PMW3360 needs to be used with LM19-LSI lens.
• R1 is optional/additional RESET pull up resistor, RESET pin of PMW3360 has a built in weak pull up circuit.
• J1 connector have the following options:
  • 2.54mm pin header: pmw3360_pcb_pinheader/
  • 0.5mm FFC/FPC: pmw3360_pcb_ffc/
  • JST GH 1.25mm: pmw3360_pcb_jst/
• U2 LDO regulator have the following options:

Ref	Default	Alt.	Alt.
U2	TLV74318PDBVR	RT9193-18GB	TPS73601DBV
C4	1uF	1uF	4.7uF
C5	DNI	22nF or larger	56.2kΩ
R4	DNI	DNI	28kΩ
Note	Fixed 1.8V	Fixed 1.8V	Adj. 1.8V

PCB Dimensions & Characteristics

Please refer to:

• 2.54mm pin header: pmw3360_pcb_pinheader/
• 0.5mm FFC/FPC: pmw3360_pcb_ffc/
• JST GH 1.25mm: pmw3360_pcb_jst/

PCB sizes vary among different connector editions.

Power

Voltage-Level Config

3 configs available:

	3.3V	1.8 with LDO	1.8V without LDO
VIN Typ.	3.3V	(VDD + 0.2V) ~ 5.5V	1.8V
VIN Max.	3.6V	5.5V	2.1V
JP1	[1-2 3]	[1 2-3]	[1-2-3]
Note			U2, R4, C3~5 can be omitted

Jumper

JP1 Config		Description
[1-2 3]	2 and 1 close, 3 NC	VIO = VIN
[1 2-3]	2 and 3 close, 1 NC	VIO = VDD (i.e. LDO output)
[1-2-3]	1, 2 and 3 close	VIO = VDD = VIN (LDO bypass)

Operating Voltage Range

• VDD: 1.8 ~ 2.1V (i.e. LDO Vout)
• VIO: VDD ~ 3.6V (i.e. VDDIO)
• VIN: Depends on Voltage-Level config

Firmware Examples

• QMK
  • RP2040
  • Pro Micro
• nRF Connect SDK (NCS)

Pre-Build firmware can be found in Releases.

License

• KiCad files (e.g. schematics, PCBs, footprints and symbols): CERN-OHL-P v2.
• firmware/qmk/: GPL v2.
• firmware/nordic/: Nordic-5-Clause.