Skip to content

Enobio.wiki

Jump to bottom Edit New page
David Medine edited this page May 17, 2016 · 6 revisions

Overview

The Enobio application is included with the full LSL distribution. The program is currently untested by should work with the current-generation Enobio dry/wireless EEG systems produced by Neuroelectrics (http://www.neuroelectrics.com/) / Starlab (http://starlab.es/).

Usage

  • Make sure that the device is turned on an properly connected.

  • Start the Enobio app. You should see a window like the following.

https://raw.githubusercontent.com/wiki/sccn/labstreaminglayer/screenshots/enobio.png

  • It is critical that you set the correct channel number for your device and sampling rate (they are not auto-deduced).

  • Click the "Link" button. If all goes well you should now have a stream on your lab network that has name "Enobio" and type "EEG". Note that you cannot close the app while you are linked.

  • The filter setting can be saved in the config file for subsequent use via File / Save Configuration. It is also possible to make a desktop shortcut that appends to the shortcut's Target field the snippet -c name_of_config.cfg.

Add a custom footer
Add a custom sidebar
Clone this wiki locally