fix: use eslint to format ts,js,json,md and yml, goodbye prettier

prettier is great but introduces additional configuration(config, ignores and scripts), and packages. Eslint is pretty much capable of doing eveything and gives you much control over the opinionated nature of prettier. Prettier describes itself to be "an opinionated code formatter".

Opinionated essentially means it’s not for everyone. Prettier makes a lot of hard-coded decisions to provide a minimal configuration interface.

.dockerignore

@@ -58,7 +58,6 @@ LICENSE
 .swcrc
 .git
 .husky
-.prettierrc
 makefile
 justfile
 test

README.md

@@ -90,11 +90,11 @@ env file
 `Note`: Env files are kept in env folder. The config validation allows 4 environment ['dev', 'prod', 'test','stage'].
 The env file name
 should be of format .env.[environment] Ex. (.env.dev). The env to use should be provided while running any script as
-NODE_ENV=dev yarn dev
+NODE_ENV=dev npm run dev
 
-Start local Postgres server and run `npx cross-env NODE_ENV=dev make migrate` to apply migrations
+Start local Postgres server and run `npx cross-env NODE_ENV=dev just migrate` to apply migrations
 
-Now you can start the application witt `npx cross-env NODE_ENV=dev yarn start`.
+Now you can start the application witt `npx cross-env NODE_ENV=dev npm run start`.
 
 ---
 
@@ -115,27 +115,24 @@ Now you can start the application witt `npx cross-env NODE_ENV=dev yarn start`.
 - 📃 **Swagger** - API Documentation
 - 🐳 **Docker Compose** - Container Orchestration
 - 🔐 **Helmet** - secure HTTP headers
-- 😴 **Insomnia** - Insomnia config for endpoints
 - 📏 **ESLint** — Pluggable JavaScript linter
-- 💖 **Prettier** - Opinionated Code Formatter
 
 ## Available Scripts
 
-- `yarn start` - Start application
-- `yarn start:dev` - Start application in watch mode
-- `yarn start:prod` - Start built application
-- `yarn start:hmr` - Start application with hot module replacement
-- `yarn format` - Formats all the files inside src using prettier with config provided in `.prettierrc`
-- `yarn lint` - Uses eslint to lint all the files inside src with config provided in `.eslintrc.cjs`
-- `yarn orm migration:create` - Uses Mikroorm to create a migration file
-- `yarn orm migration:up` - This command is used to run availablexisting migration files.
-- `yarn orm migration:down` - This command is used to rollback migration.
-- `yarn orm seeder:run` - This command is used to run existing seeders in `src/common/database`.
+- `npm run start` - Start application
+- `npm run start:dev` - Start application in watch mode
+- `npm run start:prod` - Start built application
+- `npm run start:hmr` - Start application with hot module replacement
+- `npm run lint` - Uses eslint to lint all the files inside src with config provided in `eslint.config.js`
+- `npm run orm migration:create` - Uses Mikroorm to create a migration file
+- `npm run orm migration:up` - This command is used to run availablexisting migration files.
+- `npm run orm migration:down` - This command is used to rollback migration.
+- `npm run orm seeder:run` - This command is used to run existing seeders in `src/common/database`.
 
 All the scripts require `NODE_ENV` flag
 
 Additionally, you can also see the scripts in `justfile` which is a cross platform task runner. You can use it by
-installing [just](https://github.com/casey/just#packages) and then running `just <script>
+installing [just](https://github.com/casey/just#packages) and then running `just <script>`. Ex. `just build`
 
 ---
 
@@ -146,26 +143,24 @@ installing [just](https://github.com/casey/just#packages) and then running `just
     - Also remove the unwanted config variables from the env file
 - Make sure you create a env file under `env` directory with name like `.env.something`.The portion after .env is
   the `NODE_ENV` value which will be required while running the app
-- Also make sure you have ssl files inside `src/resources/ssl` if you tend to use ssl. Replace the sample files with
-  your ssl files but keep the name same. Additionally
 
 ## Migration and seeding
 
 Migrations are used to update the database schema. The migration files are stored in `migrations` directory.
 
 ```sh
-  npx cross-env NODE_ENV=dev yarn orm migration:up # applies migration for dev env
+  npx cross-env NODE_ENV=dev npm run orm migration:up # applies migration for dev env
 ```
 
 Seeding is used to insert data into the database. The seeding files are stored in `common/database/seeders` directory.
 
 ```sh
-    npx cross-env USER_PASSWORD=Test@1234 NODE_ENV=dev yarn orm seeder:run   # seeds data for dev env with all user password set as Test@1234
+    npx cross-env USER_PASSWORD=Test@1234 NODE_ENV=dev npm run orm seeder:run   # seeds data for dev env with all user password set as Test@1234
 ```
 
 ## Start application
 
-- `npx cross-env NODE_ENV=[env name] yarn start`
+- `npx cross-env NODE_ENV=[env name] npm run start`
 - View automatically generated swagger api docs by browsing to `http://localhost:[port]/docs`
 - View automatically generated swagger stats dashboard by browsing to `http://localhost:[port]/stats`. The username and
   password is the values set in the env file under `SWAGGER_USERNAME` and `SWAGGER_PASS` respectively
@@ -179,8 +174,8 @@ ultimate-nest
 │   └── .env.dev                                  * Configuration file for development environment.
 │   └── .env.prod                                 * Configuration file for production environment.
 │   └── .env.test                                 * Configuration file for test environment.
-├── coverage                                      * Coverage reports after running `yarn test:cov` command.
-├── dist                                          * Optimized code for production after `yarn build` is run.
+├── coverage                                      * Coverage reports after running `npm run test:cov` command.
+├── dist                                          * Optimized code for production after `npm run build` is run.
 ├── src
     └── modules                                   * Folder where specific modules all files are stored
           └── <module>
@@ -209,16 +204,13 @@ authentication of the token.
 
 # Deployment
 
-You need to have `docker` and `docker-compose` (not the compose plugin) installed. Also since we are using `makefiles`
-for deployment, you need to have `make` installed.
+You need to have `docker` and `docker-compose` installed. The image environment variable values can be found at the compose file
 
 ```sh
   ENV=dev sh ./scripts/deploy.sh   # deploys dev environment (.env.dev used)
   ENV=prod sh ./scripts/deploy.sh   # deploys prod environment (.env.prod used)
 ```
 
-The password for `redis` and `rabbitmq` is `Test@1234` can be changed in the make file under `deploy` script
-
 More docs found at `docs` folder
 
 <h2 align="center">Do you use this template?<br/>Don't be shy to give it a star! ★</h2>

docs/database.md

@@ -61,35 +61,35 @@ for [PostgreSQL](https://www.postgresql.org/), but you can use any database.
 2. Next, generate migration file:
 
     ```bash
-    NODE_ENV=dev yarn orm migration:create
+    NODE_ENV=dev npm run orm migration:create
     ```
 
-3. Apply this migration to database via [yarn run orm migration:up](#run-migration).
+3. Apply this migration to database via [npm run run orm migration:up](#run-migration).
 
 ### Run migration
 
 ```bash
-NODE_ENV=dev yarn orm migration:up
+NODE_ENV=dev npm run orm migration:up
 ```
 
 ### Revert migration
 
 ```bash
-NODE_ENV=dev yarn orm migration:down
+NODE_ENV=dev npm run orm migration:down
 ```
 
 More info for the migrations can be found at: https://mikro-orm.io/docs/migrations
 
 ### Drop the database and migrate up to the latest version
 
 ```bash
-NODE_ENV=dev yarn orm migration:fresh
+NODE_ENV=dev npm run orm migration:fresh
 ```
 
 # Generate Seeds
 
 ```bash
-NODE_ENV=dev yarn orm seeder:create AuthorSeeder  # generates the class AuthorSeeder under src/common/database/seeders
+NODE_ENV=dev npm run orm seeder:create AuthorSeeder  # generates the class AuthorSeeder under src/common/database/seeders
 ```
 
 ```bash
@@ -112,7 +112,7 @@ export class AuthorSeeder extends Seeder {
 To run the generated seeder:
 
 ```bash
-NODE_ENV=dev yarn orm seeder:run AuthorSeeder  # runs the authorseeder
+NODE_ENV=dev npm run orm seeder:run AuthorSeeder  # runs the authorseeder
 ```
 
 More info for the seeding can be found at: https://mikro-orm.io/docs/seeding

docs/linting.md

@@ -8,13 +8,12 @@
 - [Configuration](#configuration)
 - [FAQ](#faq)
 
-This project uses Typescript Eslint, and Prettier to catch errors and avoid bike-shedding by enforcing a common code
+This project uses Typescript Eslint to catch errors and avoid bike-shedding by enforcing a common code
 style.
 
 ## Languages
 
-- **TypeScript** is linted by Typescript Eslint and formatted by Prettier
-- **JSON** is formatted by Prettier
+- **TypeScript** is linted and formatted by Typescript Eslint.
 
 ## Scripts
 
@@ -24,12 +23,12 @@ There are a few different contexts in which the linters run.
 
 ```bash
 # Lint all files without auto-fixing
-yarn lint
+npm run  lint
 ```
 
 ```bash
 # Lint all files, fixing many violations automatically
-yarn lint:fix
+npm run lint:fix
 ```
 
 See `package.json` to update.
@@ -47,8 +46,10 @@ In supported editors, all files will be linted and show under the linter errors
 This boilerplate ships with opinionated defaults, but you can edit each tools configuration in the following config
 files:
 
-- [ESLint](https://eslint.org/docs/user-guide/configuring)
-    - `.eslintrc.cjs`
+- [ESLint](https://eslint.org/docs/latest/use/configure/configuration-files-new)
+    - `eslint.config.js`
+
+Note: This uses eslint flat config, which is the recommended way to configure eslint.
 
 ## FAQ
 
@@ -60,5 +61,5 @@ files:
   possible, because dynamic configurations are simply more powerful, able to respond to environment variables and much
   more.
 
-The linting rules can be found at [eslint-plugin-unicorn](https://github.com/sindresorhus/eslint-plugin-unicorn) which
+The linting rules can be found at [@rubiin/eslint-config](https://github.com/rubiin/eslint-config) which
 has more than 100 powerful ESLint rules that help prevent bugs and enforce conventions.

justfile

@@ -24,7 +24,7 @@ seed env="dev":
 
 # test e2e with jest
 test-e2e env="dev":
-	USER_PASSWORD=Test@1234 NODE_ENV={{env}} yarn test:e2e
+	USER_PASSWORD=Test@1234 NODE_ENV={{env}} npm run test:e2e
 
 # will drop the database, run all migrations
 seed-fresh env="dev":