-
-
Notifications
You must be signed in to change notification settings - Fork 390
openHAB 3.2 Release Notes
Kai Kreuzer edited this page Dec 19, 2021
·
1 revision
This is the official release of openHAB 3.2.0.
The binaries are available on Artifactory and via "Stable" on our APT repository.
The openHAB 3.2 release is a feature release that contains many new features, enhancements and bug fixes, both for the core runtime and for many add-ons. You can find the most relevant ones listed in detail below.
openHAB 3.2 is fully backward compatibility to openHAB 3.1 setups - there are only a few exceptions where manual action is required to adapt an existing setup, so please carefully check the section on breaking changes.
- Notes about new add-ons
- Notes about the core runtime
- Notes about the uis
- Notes about the add-ons
- Upgrade Process for openHABian, APT, RPM, Manual Installations
- Breaking Changes that require manual interaction after the upgrade.
The following add-ons are newly introduced with the 3.2 release:
| Add-on | Type | Issue |
|---|---|---|
| amplipi | Binding | #10983 |
| anel | Binding | #10952 |
| dbquery | Binding | #8780 |
| deutschebahn | Binding | #11384 |
| dominoswiss | Binding | #11585 |
| ekey | Binding | #10996 |
| ipobserver | Binding | #10567 |
| mikrotik | Binding | #10014 |
| orbitbhyve | Binding | #10426 |
| proteusecometer | Binding | #11333 |
| pushsafer | Binding | #10790 |
| renault | Binding | #11467 |
| SNCF | Binding | #11607 |
| souliss | Binding | #11083 |
| Tapocontrol | Binding | #11111 |
| Binding | #10241 | |
| wolfsmartset | Binding | #10751 |
| jrubyscripting | Automation | #11538 |
The following improvements were made:
| Type | Issue | Change |
|---|---|---|
| Enhancements | 2405 | Community Marketplace Add-on Service |
| 2428 | Add semantics to default system channel types | |
| 2437 | Consistent ordering of entries in jsondb | |
| 2456 | Make ScriptLibraryWatcher accessible for other languages than JS | |
| 2459 | Implement a listener for ScriptEngineFactory changes | |
| 2477 | Refine Rest Auth config parameters | |
| 2502 | ChartServlet bug fixes and improvements | |
| 2519 | Add ser2net mDNS USB serial discovery | |
| 2531 | Prevent shutdown of shared thread pool | |
| 2533 | Align item endpoint with items endpoint | |
| 2540 | Log item name in warnings of ItemStateConditionHandler | |
| 2547 | mDNS / UPnP discovery internationalization | |
| 2549 | New exception class that incorporates support for internationalization | |
| 2567 | Add variable 'triggeringChannel' to DSL rules | |
| 2570 | Add Timer.isCancelled() method | |
| 2587 | Add basic time-related classes for usage in script and rules | |
| Bug Fixes | 2435 | Allow UoM in 'ItemStateCondition' |
| 2470 | Handle IP v6 in X-Forwarded-Host header | |
| 2486 | Metrics improvements and fixes | |
| 2493 | Prevent NSEE when there is no AddonService | |
| 2508 | Fix add-on type inconsistencies | |
| 2563 | Fix NPE in WatchQueueReader | |
| 2577 | Fix IllegalStateException in IconServlet | |
| 2579 | Fix ConcurrentModificationException in ExpiringUserSecurityContextCache | |
| 2602 | Use Accept-Language header for locale in ConfigurableServiceResource |
| UI | Type | Issue | Change |
|---|---|---|---|
| Basic UI | Bug Fixes | 1132 | Fix handling of buttons when only 1 button |
| 1139 | Fix color selector placement | ||
| Main UI | Enhancements | 1100 | Plan layout for floorplan-like pages with system/custom widgets |
| 1145 | Update alexa integration with new metadata syntax | ||
| 1158 | Replace Add-on Management UI with Add-on Store | ||
| 1173 | Add rule template support | ||
| 1175 | Add click action to oh-gauge-card | ||
| 1179 | Expand Blockly with new blocks (part 1) & update to latest version | ||
| 1187 | Addition of graphical layer management for canvas layouts | ||
| 1209 | Add a Blockly block to define key/value dictionaries | ||
| 1212 | Blockly enhancements - scripts, ephemeris, persistence | ||
| 1220 | Update alexa blind and channel attributes | ||
| 1222 | Update alexa thermostat hold attribute | ||
| 1223 | Update alexa position state and tilt angle attributes | ||
| 1225 | Add Block Libraries | ||
| 1226 | Add missing homekit configurations | ||
| 1230 | Update position state action mappings default value | ||
| Bug Fixes | 1148 | Fix detection of protected user API operations | |
| 1149 | oh-icon component improvements, Iconify icon support | ||
| 1151 | Correct mimetype for disabling/enabling things call | ||
| 1156 | Fix oh-icon's f7/material icons on mobile | ||
| 1167 | Fix oh-icon not updating | ||
| 1177 | Fix home page initialization logic | ||
| 1202 | Fix addons details serviceId | ||
| 1208 | Remove alexa camera stream basic auth parameters | ||
| 1231 | Fix add link "compatible item" logic | ||
| 1232 | Add link: add semantic tags from channel/channel type | ||
| 1233 | Add missing style parameter to oh-icon | ||
| 1236 | Fix Blockly timer code | ||
| 1240 | JSScripting tern fixes | ||
| 1243 | Check config before allowing oh-icon style customization |
| Add-on | Type | Issue | Change |
|---|---|---|---|
| AirQuality | Enhancements | 11192 | Tagging channels, prepared for Crowdin, dynamic channels |
| airthings | Enhancements | 11052 | Add support for Airthings Wave Gen 1 |
| automower | Enhancements | 11323 | Support for GPS coordinates provided by API |
| avmfritz | Enhancements | 11348 | Add support for DECT500 and HAN-FUN bulbs |
| 11682 | Exclude other Powerline products from discovery | ||
| 11723 | Add support for HAN-FUN Color and Dimmable bulbs | ||
| Bug Fixes | 11640 | Add representation-property to bridge type definitions | |
| 11773 | Fix update of data for blinds | ||
| 11790 | Prevent attempt to set brightness of blinds | ||
| benqprojector | Bug Fixes | 11140 | Fix equalsIgnoreCase issue |
| bluetooth.bluegiga | Bug Fixes | 11179 | Fix CompareObjectsWithEquals findings regression causing all devices to be beacons |
| bluetooth.enoceanble | Bug Fixes | 11381 | Prevent that channels are triggered multiple times per click |
| BMWConnectedDrive | Enhancements | 11264 | Authorization fix + channel enhancements |
| boschshc | Enhancements | 11134 | Parental Controls for Thermostats; Wall Thermostats; Internal refactoring |
| bsblan | Bug Fixes | 11226 | Several configuration parameters are not visible in Main UI |
| 11229 | Support quantity types for "number-value" channel | ||
| caddx | Enhancements | 10923 | Add new channels and support for ignoring zone status transitions |
| chamberlainmyq | Enhancements | 11115 | Add new Close Error and Open Error Switch channels |
| chromecast | Enhancements | 11510 | Add support for next command |
| 11689 | Add configuration flag to disable background discovery | ||
| 11694 | Add pattern for DateTime channel types | ||
| danfossairunit | Enhancements | 11121 | Change Humidity channel type from Number to Number:Dimensionless |
| 11129 | Add channel descriptions and categories | ||
| 11147 | Rename channel manual_fan_speed to manual_fan_step for consistency | ||
| 11371 | Add filter period channel | ||
| Bug Fixes | 11172 | Fix network reliability issues and setting of all channel values to zero | |
| deconz | Enhancements | 10950 | Use ChannelBuilder created by ThingHandlerCallback |
| Bug Fixes | 11036 | Change default color mode for color commands to XY | |
| denonmarantz | Bug Fixes | 11766 | Fix xml unmarshalling exception |
| digitalstrom | Bug Fixes | 11433 | Fix remove excessive log statements for unknown Application Groups |
| 11434 | Fix NoSuchElementException when no functional groups set | ||
| doorbird | Bug Fixes | 11190 | Fix controller id |
| dsmr | Enhancements | 11458 | Add support for Austrian meters, Fix for channel id detection |
| Bug Fixes | 11328 | Fix payload length calculation for Smarty meters | |
| ecotouch | Bug Fixes | 10989 | Fix decimal values being truncated |
| enocean | Enhancements | 10769 | Add second action for two rocker switches |
| 10949 | Add support for the D2_06_50 EEP type | ||
| 11009 | Standardize config URI | ||
| 11230 | Add support for Soda Handles (EEP D2-06-01) | ||
| Bug Fixes | 11408 | Fix concurrency exception on startup | |
| epsonprojector | Enhancements | 10988 | Add configurable volume channel range |
| Bug Fixes | 11141 | Fix equalsIgnoreCase issue | |
| espmilight | Enhancements | 11047 | Add color channels ability to trigger white LEDs |
| feed | Enhancements | 11345 | Add channel for enclosure link on latest entry |
| fmiweather | Bug Fixes | 11025 | Fix UNDEF observations in corner case situations. |
| fronius | Enhancements | 10757 | Add inverter power, battery state of charge and PV solar yield |
| fsinternetradio | Enhancements | 11045 | Add further supported devices |
| gardena | Bug Fixes | 10924 | Fix OutOfMemory error if initializing fails |
| groovyscripting | Enhancements | 11251 | Update Groovy to 3.0.9 |
| haywardomnilogic | Bug Fixes | 11028 | Remove erroneous chlorinator code from filterhandler |
| hdpowerview | Enhancements | 11155 | Add new battery voltage channel |
| 11198 | Add new signal strength channel | ||
| 11206 | Add new battery level channel | ||
| 11260 | Add Hub configuration option hardRefreshBatteryLevel | ||
| 11534 | Add support for scene groups | ||
| 11637 | Add support for enabling/disabling automations | ||
| Bug Fixes | 11201 | Fix low battery when no battery status available | |
| 11552 | Secondary shade position was inverted | ||
| 11707 | Fix initialization of shade handler | ||
| 11779 | Fix deprecated channels on reinitialization | ||
| homeconnect | Enhancements | 10914 | Show response code in request details modal and JS code cleanup |
| 10953 | Predefined temp / spin speeds options for unsupported washer programs | ||
| 11071 | Add two channels for washer appliance | ||
| 11706 | Add oven control | ||
| Bug Fixes | 10929 | Catch exception when appropriate | |
| 10990 | Fix update of channels linked to program options | ||
| homekit | Enhancements | 10936 | Add support for group item type to window covering |
| Bug Fixes | 11717 | Make min/max values for Color Temperature configurable | |
| 11720 | Restart HomeKit bridge on network changes | ||
| 11731 | Add setting to block homekit user/pairing deletion | ||
| homematic | Enhancements | 11186 | Remove double press events and improve long press events for button trigger |
| 11429 | Improve (re)connect handling to Homematic gateways | ||
| Bug Fixes | 10907 | Fix UI enumeration of HM-MOD-EM-8 channels | |
| 10942 | Update property files | ||
| 10965 | Provide additional null pointer checks | ||
| 11493 | Fix "Channel not found for Datapoint" errors | ||
| homewizard | Bug Fixes | 11666 | Fix issue with missing gas values |
| hpprinter | Enhancements | 11739 | Change status channel from hash map values to state description options |
| hue | Enhancements | 11452 | Add LightActions to Hue light groups |
| 11535 | Factorize thing configurations | ||
| 11572 | Add workaround for LK Wiser products | ||
| Bug Fixes | 11289 | Make sure bridge status is set when returning from initialize | |
| 11519 | Fix unicode character in translation | ||
| hueemulation | Bug Fixes | 10692 | Fix xy change response |
| hydrawise | Bug Fixes | 10947 | Migrate to new GraphQL based API |
| icalendar | Bug Fixes | 11178 | Fix internal calculation for retrieving events for command tags |
| icloud | Bug Fixes | 11600 | iCloud response invalid: null (second time) |
| ihc | Bug Fixes | 10895 | Improve command handling when controller is not ready |
| influxdb | Bug Fixes | 10937 | Fix queries with InfluxDB 2.0 with data migrated from InfluxDB1 without item tags |
| insteon | Enhancements | 10908 | Add representation property for devices |
| ipcamera | Enhancements | 11067 | Improve FFmpeg motion detection to support wider FPS range |
| 11160 | Move to using port 8080 servlet not Netty. | ||
| 11419 | Improvements and fix 503 errors go to offline with Hik | ||
| 11748 | Add new channel lastEventData for detailed extra data on alarms | ||
| Bug Fixes | 11089 | Fix bugs, IndexOutOfBoundsException and remove sleep | |
| 11300 | Fix ipcamera.jpg can return an old picture | ||
| 11457 | Fix Hikvision digest stopping ipcamera.mjpeg | ||
| irobot | Enhancements | 11783 | Add zone support |
| jdbc | Enhancements | 11023 | Select the proper schema when retrieving the item tables |
| 11091 | Add support for TimescaleDB (#11090) | ||
| js-transform | Enhancements | 10901 | Introduce support for additional parameters |
| 11473 | Inline java script support | ||
| jsscripting | Enhancements | 11437 | Update GraalJS to 21.3 to allow method selection via JavaScript |
| 11656 | openhab-js integration | ||
| 11693 | Add simple Shared Cache into scope | ||
| 11719 | GraalJS now uses automation/js | ||
| Bug Fixes | 11400 | Tell the script context to use the classloader of the current class | |
| kaleidescape | Enhancements | 11231 | Add configuration option to auto load metadata channels without rules |
| 11258 | Improve discovery service | ||
| knx | Enhancements | 11759 | Upgrade Calimero library to release 2.5 |
| kodi | Enhancements | 11181 | Add channel for KODI JSON-RPC call Input.ButtonEvent |
| kostalinverter | Bug Fixes | 11002 | Fix using binding together with z-wave binding |
| lgtvserial | Bug Fixes | 11776 | Fix sending commands using serial port |
| lgwebos | Enhancements | 10971 | Switch to default system channel types |
| Bug Fixes | 11461 | Fix a setting description | |
| lifx | Enhancements | 11262 | Support HEV clean cycle |
| 11309 | Add channels for controlling absolute color temperature in Kelvin | ||
| 11405 | Add missing products | ||
| Bug Fixes | 11180 | Add missing color feature to a few products | |
| 11653 | Improve InterruptedException handling | ||
| linky | Enhancements | 11647 | Few debug logs added |
| Bug Fixes | 11406 | Correct authentication bug | |
| logreader | Enhancements | 11681 | Add pattern for DateTime channel types |
| loxone | Enhancements | 11240 | Support for SHA-256 |
| 11270 | Sauna controller implementation | ||
| lutron | Enhancements | 11726 | Explicitly enable proper monitoring types for HomeWorks connections |
| Luxtronik | Bug Fixes | 11318 | Fix possible out of bound error for older heatpumps |
| LuxtronikHeatpump | Enhancements | 11135 | Fix/update channels for setting hot water target temperature |
| 11273 | Add channel for heating limit temperature | ||
| magentatv | Bug Fixes | 11238 | Fix start UPNP listener to catch power off button, thing id in log |
| Enhancements | 11307 | Add support for e-mail headers | |
| mcp23017 | Enhancements | 11010 | Standardize config URI |
| MeteoAlerte | Enhancements | 10993 | Small code enhancements |
| metrics | Enhancements | 11249 | Add Java Management Extensions (JMX) metrics exporter |
| Bug Fixes | 11280 | Fix configuration PID and add file based configuration example | |
| miele | Enhancements | 11298 | Add new power and water consumption channels for dishwashers and washing machines |
| 11329 | Temperature channel improvements: UoM, categories and descriptions | ||
| 11341 | State/program/phase: Add raw channels and improve text channels | ||
| 11603 | Localization of state, program and phase | ||
| 11782 | Reduce log level to TRACE for request/response logging | ||
| Bug Fixes | 11218 | Fix broken things file support | |
| 11244 | Fix multicast and multi-protocol support (ZigBee/Wi-Fi) | ||
| 11287 | Fix IllegalArgumentException when using oven channel 'type' | ||
| 11302 | Fix coffee machine auto-discovery | ||
| 11321 | Fix supercool/superfreeze for fridges/fridge-freezers | ||
| 11417 | Fix reading of water/power consumption on some appliance models/configurations | ||
| 11423 | Clean up properties and improve reliability and performance | ||
| mielecloud | Bug Fixes | 10928 | Less strict e-mail validation |
| 11073 | Remove e-mail parameter validation | ||
| miio | Enhancements | 10951 | Change deviceID to Xiaomi used string |
| 10957 | Add new custom refresh methods and improve response to channel matching | ||
| 10984 | Improve yeelight RGB with brightness, introduce substitutions | ||
| 11097 | Add moppath & carpet area to robomap | ||
| 11106 | Add support for Mi Smart Standing Fan 2 (dmaker.fan.p18) | ||
| 11110 | Map improvement cropping and customizable colors/parameters | ||
| 11118 | Improve/add properties for qmi powerstrip | ||
| 11142 | Add support for mi airfryers (careli.fryer.maf01,2&3) | ||
| 11149 | Automatic create experimental support for (unsupported) miot devices | ||
| 11164 | Add support for Smartmi Fresh Air System (zhimi.airfresh.va4&va2) | ||
| 11241 | Add support for Yeelight Jade Smart LED Ceiling Light | ||
| 11464 | Save last msgId and misc minor updates | ||
| 11475 | Sending device in MiIoSendCommand | ||
| 11477 | Support contact type in basic channel json | ||
| 11492 | Add support 3 yeelights | ||
| 11568 | Move (remaining) channel details to json files | ||
| 11576 | i18n translation handling for basic channels | ||
| 11577 | Add support Mi Smart Humidifier deerma.humidifier.jsq5 | ||
| 11579 | Add support Mi Fresh Air Ventilator C1-80 zhimi.airfresh.ua1 | ||
| 11581 | Support sending openclose commands | ||
| 11657 | Add support for BT Gateway switch on chuangmi.plug.212a01 | ||
| 11659 | Add new vacuum status codes | ||
| 11669 | Add support for new dreame vacuum models (p2027,p2028,p2059) | ||
| 11687 | Add support for Mi Smart Humidifer S (deerma.humidifier.jsqs) | ||
| 11715 | Add BT Devices channel to chuangmi plug | ||
| 11727 | Add support for Roidmi EVE roidmi.vacuum.v60 | ||
| 11763 | Improve Viomi vacuums, add docking and route channel & mapping | ||
| Bug Fixes | 10960 | Fix color lights sending numbers as strings | |
| 11166 | Avoid shutting down shared executor service | ||
| 11420 | Avoid NPE in discovery in case of unexpected response cloud | ||
| 11455 | Avoid excessive MessageSenderThread | ||
| 11459 | Force start cloudconnector after credentials are updated | ||
| 11658 | Fix Error parsing miot data null for new miot devices | ||
| 11722 | Fix zhimi.airpurifier.vb2 channel unit | ||
| 11794 | Fix action channel miot for empty input with parameters | ||
| miio/ntp | Bug Fixes | 11699 | Fix wrong "Date" channel category |
| mikrotik | Enhancements | 11395 | Basic PPP/LTE interface support |
| Bug Fixes | 11386 | WiFi client logging and presence problem fix | |
| milight | Bug Fixes | 11367 | Fix minimum value for parameter repeat |
| misc | Bug Fixes | 11313 | Fix/remove outdated "Default Tags" |
| 11643 | Bump jsoup from 1.8.3 to 1.14.3 | ||
| modbus | Enhancements | 11292 | Clarify error messages with invalid configuration |
| Bug Fixes | 11281 | Remove helioseasycontrols binding.xml causing binding identification issues | |
| mqtt | Bug Fixes | 9851 | Fix availability topics subscription after Brige Restart |
| 10566 | Discovery services shall not unsubscribe unless they have already subscribed | ||
| mqtt.espmilighthub | Enhancements | 11098 | Sematic tags added. |
| mqtt.homeassistant | Enhancements | 11216 | Implement Vacuum discovery for Homeassistant MQTT |
| 11562 | Make the mqtt.vacuum compliant | ||
| Bug Fixes | 11315 | Discovery exceptions processing | |
| myq | Bug Fixes | 11183 | Switch to using OAuth for logins |
| 11343 | Fix a serious issue that could wipe out all OH cookies | ||
| 11601 | Fix breaking API changes to the MyQ binding | ||
| 11765 | Fix for controlling lights | ||
| nanoleaf | Enhancements | 11133 | Reimplement touch detection based on SSE, stabilize behavior, add swipe support |
| network | Enhancements | 11199 | Add possiblity to send WOL Requests to configured Hostname |
| networkupstools | Enhancements | 11082 | Add missing status |
| nikobus | Enhancements | 11011 | Standardize config URI |
| 11548 | Add option to set rollershutter position | ||
| nikohomecontrol | Enhancements | 11319 | Prepare for translation |
| Bug Fixes | 11737 | Fix dimmer control sequence | |
| 11751 | Add ability to directly use virtual flags as switches | ||
| nuki | Enhancements | 10672 | Add opener support and discovery |
| nuvo | Bug Fixes | 11511 | Fix protocol errors when connecting via an MPS4 |
| nzwateralerts | Bug Fixes | 11734 | Fix smart water alert level |
| ojelectronics | Bug Fixes | 11555 | Fix server timeout is stopping the extension |
| omnikinverter | Enhancements | 11645 | Add channels for voltage and current |
| OmniLink | Bug Fixes | 11005 | Fix zone bypass/restore commands |
| openhabcloud | Bug Fixes | 11153 | Reconnect on connection errors |
| 11404 | Spelling fix ("Notificaton" -> "Notification") | ||
| opensprinkler | Enhancements | 9869 | Fix bugs and warnings |
| openweathermap | Bug Fixes | 11086 | Fix ozone mapping in DTO |
| 11255 | Fix NPE on OneCall-API and reduce min refreshInterval to support paid plans | ||
| 11360 | Bridge status set to ONLINE when no attached things | ||
| openwebnet | Enhancements | 11398 | Add support for CEN/CEN+ scenarios (WHO=15/25) |
| 11747 | Add support for Dry Contact and IR interfaces for WHO=25 | ||
| Bug Fixes | 10934 | Fix messages flooding BUS on reboot | |
| 11644 | Fix discovery of devices on local bus. | ||
| 11705 | Reduced log messages during UPnP bridge discovery | ||
| phc | Bug Fixes | 11554 | Fix bug and add support for multiple commands |
| pidcontroller | Enhancements | 11312 | Improve logging |
| pjlinkdevice | Bug Fixes | 11472 | Fix authentication |
| plugwise | Bug Fixes | 11746 | Fix 'power' channel not correctly updated with power production |
| powermax | Enhancements | 10624 | Introduce some new channels for better status reporting |
| 11275 | Add null annotations | ||
| pulseaudio | Enhancements | 11055 | Move the binding config in file binding.xml |
| 11631 | Add reencoding to play more audio formats | ||
| Bug Fixes | 11171 | Fix playing time with pulseaudio sink | |
| 11276 | Fix sink-input configuration and other | ||
| pushover | Enhancements | 11027 | Add support to send an Image URL directly |
| radiothermostat | Bug Fixes | 11635 | Fix JSON thermostat data parsing error |
| rfxcom | Enhancements | 10940 | Add ability to properly receive configured command ids, deprecate hard-coded guesses |
| robonect | Enhancements | 11014 | Standardize config URI |
| 11137 | Channel for distance from charging station on remote start | ||
| roku | Enhancements | 11087 | Add additional functionality for Roku TVs |
| rotel | Enhancements | 10969 | Add semantics to channel types |
| rrd4j | Enhancements | 11355 | Upgrade rrd4j, improve exception handling |
| sagercaster | Enhancements | 11295 | Enhance binding internals |
| 11665 | Reintroducing timestamp channel | ||
| samsungtv | Bug Fixes | 11487 | Fix reconnect after first connection to TV is lost |
| semsportal | Bug Fixes | 11127 | Fix lastUpdate parse format to accept the format provided by the inverter |
| sleepiq | Bug Fixes | 11700 | Use constructor injection for ClientBuilder |
| smhi | Bug Fixes | 11113 | Fix IndexOutOfBoundsException in aggregator function |
| 11353 | Ensure trailing zeroes are removed before updating channels | ||
| somfytahoma | Bug Fixes | 11254 | Fixed rssi channels creation & properties updating |
| sonos | Enhancements | 10979 | Add new channel codec for several models |
| Bug Fixes | 10925 | Filter Sonos Sub from discovery | |
| sonyprojector | Enhancements | 10970 | Switch to the default system channel type for power channel |
| spotify | Enhancements | 11370 | Various enhancements and fixes |
| squeezebox | Bug Fixes | 11151 | Fixes volume parsing when volume string is a float |
| surepetcare | Bug Fixes | 11235 | Check for null before updating pet location channels |
| systeminfo | Enhancements | 11016 | Standardize config URI |
| 11274 | Upgrade OSHI dependency for latest fixes/improvements | ||
| 11322 | Add 2 new channels for Java heap | ||
| Bug Fixes | 11351 | Fix heap graph too high on axis. | |
| telegram | Enhancements | 9251 | Add event channels and Answer overload |
| 11125 | Send message if a file download fails | ||
| Bug Fixes | 11215 | Fixes exceptions that stop rules/actions from finishing | |
| teleinfo | Enhancements | 11375 | Add support for Standard tic mode |
| tivo | Bug Fixes | 10902 | Fix thing staying offline after connection refresh |
| tplinksmarthome | Enhancements | 11015 | Standardize config URI |
| 11282 | Added new devices EP10, EP40, KL125, and KL135 | ||
| Bug Fixes | 11680 | Fixed invalid channels in KL125/KL135 definition. | |
| tr064 | Enhancements | 10959 | Add Wifi Signal Strength & Wifi Speed channels to LAN Subdevice |
| Bug Fixes | 11337 | Fix incorrectly reported decibel values for DSL Noise Margin and Attenuation | |
| unifi | Bug Fixes | 11411 | Fix thing configuration reload after changes |
| 11451 | Fix online/blocked channels after client is disconnected | ||
| upb | Enhancements | 11012 | Standardize config URI |
| 11352 | Handle device state reports | ||
| Bug Fixes | 11342 | Fix retry logic | |
| velbus | Bug Fixes | 11553 | Fix typo in the Counter Channel name for VMB7IN |
| venstarthermostat | Enhancements | 11305 | Add more channels provided by the local API |
| verisure | Enhancements | 11265 | Adapted to new authentication process and support for non MFA activated user |
| Bug Fixes | 11108 | Fix Binding not working properly HANDLER_REGISTERING_ERROR | |
| 11397 | Keep refreshing after RuntimeException | ||
| VigiCrues | Enhancements | 10992 | Adding localization and a bit of code cleansing |
| volvooncall | Enhancements | 10991 | Extend battery channels |
| wemo | Enhancements | 11208 | Add dimensions for power/energy channel types for Insight Switch |
| Bug Fixes | 11385 | Fix wrong brightness value for dimmer switch | |
| 11679 | Fix receiving empty binary state during poll | ||
| wled | Enhancements | 11509 | Abstract json api for better segment support |
| 11785 | Add configuration to sort state options of channels | ||
| Bug Fixes | 11389 | Fix Nightlight sleep timer to use default time | |
| 11786 | Fix two events being logged when light is off | ||
| 11797 | Fix global OFF blocks lights turning on via the masterControls | ||
| XMLTV | Enhancements | 11594 | Preparing for Crowdin and code refining |
| xmppclient | Enhancements | 11247 | Add send image throught HTTP |
| 11418 | Set dependencies in the pom.xml to provided | ||
| yamahareceiver | Enhancements | 11063 | Add possiblity to switch HDMI outputs on and off on Yamaha receivers |
| Bug Fixes | 11471 | Handle 'No Preset' tuner preset response properly | |
| yeelight | Enhancements | 11013 | Standardize config URI |
| Zigbee | Enhancements | 659 | Allow Zigbee channel to be set on running system |
| 667 | Ensure metering data is handled as floating point | ||
| 668 | Update Instantaneous Demand channel to use floating point | ||
| 674 | Add neighbors console command | ||
| 678 | Add firmware update command to console | ||
| 689 | Add device type to label in LevelControl and OnOff converters | ||
| 692 | Start Ember statistics polling after completion of initialisation | ||
| 693 | Avoid running multiple polling threads per device | ||
| 695 | Add support for listening to group addresses on Ember coordinator | ||
| 697 | Provide option to invert level control and level reports | ||
| 698 | Add configuration for FanControl cluster | ||
| 700 | Simplify mechanism to detect thermostat channels | ||
| 708 | Treat DefaultResponse SUCCESS as confirmation of device state being updated | ||
| 710 | Hue control selection | ||
| 713 | Remove ZigBee library deprecations from a number of converters | ||
| 714 | Remove deprecations and monitor color command responses | ||
| 715 | Monitor responses to commands on several channel converters | ||
| Bug Fixes | 658 | Ensure coordinator IEEE address is set on startup | |
| 662 | Change type of summation for reporting configuration | ||
| 663 | Fix cluster definition for electrical metering channels | ||
| 666 | Fix metering data type | ||
| 669 | Fix SmartThings motionv4 channels - add temperature | ||
| 677 | Fix incorrectly named temperature channel in SmartThings motionv4 | ||
| 687 | Ensure consistent use of LOCKSTATE for door lock channel | ||
| 719 | Ensure node descriptor is not null when setting properties | ||
| zoneminder | Bug Fixes | 11159 | Fixes API structural change relating to the location of event counts |
| 11463 | Fix calls to set state options | ||
| ZWave | Enhancements | 1675 | Support raw String color definition |
| zway | Enhancements | 11122 | Change minimum polling interval to 1 second. |
If you are working with an openHABian setup, the upgrade is quite easy. Regardless of if you are currently using the openHAB 2.5 or 3.x stable release or one of the latest 3.2.0 SNAPSHOT or milestone builds, switching to openHAB 3.2.0 stable is done in just a few steps:
- Connect to the SSH command line and execute:
sudo openhabian-config - When being asked, answer that you want to update.
- Select the menu entry"03 - Install openHAB" option.
Make sure that openHAB is sourced from the latest location, has the correct GPG signing key and that your system can download .deb packages via HTTPS by following the instructions for a stable installation in the docs.
If the above is correct, simply upgrade by using:
sudo apt-get update
sudo apt-get upgradeAlternatively, you can force apt to install 3.2.0 and its optional add-ons with:
sudo apt-get install openhab=3.2.0-1
## optional add-ons for offline installation ##
sudo apt-get install openhab-addons=3.2.0-1openHAB is also distributed in RPM packages. To use them, make sure that openHAB is sourced from the latest location, and has the correct GPG signing key for verification by following the stable installation instructions outlined in the docs.
If the above is correct, then simply upgrade using your systems package manager (yum, dnf, etc.)
sudo yum updateAlternatively, you can force apt to install 3.2.0 and its optional add-ons with:
sudo yum install openhab-3.2.0-1
## optional addons for offline installation ##
sudo yum install openhab-addons-3.2.0-1Official update scripts are available that let you update your 3.x installation to version 3.2:
- Change to your openHAB root directory (e.g.
cd /opt/openhab) - Create a backup by calling
sudo ./runtime/bin/backup. - Run the update command:
sudo ./runtime/bin/update 3.2.0
- Make a backup of your openHAB installation folder.
- Run PowerShell as an administrator and change to your openHAB root directory (e.g.
cd C:\openHAB) - Run the update command:
. .\runtime\bin\update.ps1
Update-openHAB -OHVersion 3.2.0
Full refactoring of things and channels. Please read the updated documentation and start with new things.
The channel 'manual_fan_speed' has been deprecated and replaced by channel 'manual_fan_step'. Items should be relinked to the new channel.
The RockerSwitch channels do not longer react if two buttons of a rocker switch are pressed simultaneously. If needed, the new channel RockerSwitchAction can be used instead.
The DOUBLE_PRESSED trigger event was removed from the BUTTON channel. If needed, it can be replaced by a rule triggered by the SHORT_PRESSED event which employs a timer to check for double presses.
Channel groups have been introduced for the PowerView Hub thing. Scene channels should be relinked to the new channels for channel group 'Scenes'.
The URLs that serve the files have changed to now be on port 8080 and the serverPort config is no longer needed. Update any widget and rules if you have hard coded the URLs into them.
The type of the channels 'power', 'mute', 'volume' and 'mediaPlayer' was updated. You may need to remove and create again your things in case your things were previously created using UI and you want to use one of these channels.
The temperature channels have been converted from Number to Number:Temperature.
The channels 'state', 'program' and 'phase' are improved with better and possibly localized texts. Rules should use the new channels 'rawState', 'rawProgram' and 'rawPhase' for reliability. Please see the binding documentation for details.
Lighting4 default command ids are deprecated and will be removed in a future version. You must specify command ids in the thing configuration for Lighting4 devices.
The type of the channels 'pressure', 'temperature' and 'wind-angle' was updated. You may need to remove and create again your things in case your things were previously created using UI and you want to use one of these channels.
The type of the channel 'power' was updated. You may need to remove and create again your things in case your things were previously created using UI and you want to use this channel.