2.0.4rc1 typing annotations

.github/FUNDING.yml

@@ -1,6 +1,6 @@
 # These are supported funding model platforms
 
-github: [o-murphy] # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
+#github: [o-murphy] # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
 #patreon: o-murphy
 open_collective: o-murphy # Replace with a single Open Collective username
 ko_fi: o_murphy

.github/workflows/mypy.yml

@@ -0,0 +1,25 @@
+name: Mypy typing check
+
+on: [push, pull_request]
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    strategy:
+      matrix:
+        python-version: ["3.9", "3.10", "3.11", "3.12"]
+    steps:
+    - uses: actions/checkout@v4
+    - name: Set up Python ${{ matrix.python-version }}
+      uses: actions/setup-python@v5
+      with:
+        python-version: ${{ matrix.python-version }}
+    - name: Install dependencies
+      run: |
+        python -m pip install --upgrade pip
+        python -m pip install -e .[dev,charts]
+        python -m pip install pandas-stubs matplotlib-stubs
+
+    - name: Analysing the code with mypy
+      run: |
+        mypy ./py_ballisticcalc 

.github/workflows/pylint.yml

@@ -17,8 +17,8 @@ jobs:
     - name: Install dependencies
       run: |
         python -m pip install --upgrade pip
-        pip install pylint
+        python -m pip install -e .[dev]
+
     - name: Analysing the code with pylint
       run: |
-        #pylint $(git ls-files '*.py')
         pylint ./py_ballisticcalc 

.github/workflows/python-package.yml

@@ -27,7 +27,8 @@ jobs:
         sudo apt-get install build-essential -y
 
         python -m pip install --upgrade pip
-        python -m pip install setuptools pytest cython
+        python -m pip install setuptools cython
+        python -m pip install -e .[dev]
 
     - name: Check Python version and install tomli if less than 3.11
       run: |

.github/workflows/python-publish-test.yml

@@ -29,7 +29,8 @@ jobs:
           sudo apt-get install build-essential -y
 
           python -m pip install --upgrade pip
-          python -m pip install setuptools pytest cython
+          python -m pip install setuptools cython
+          python -m pip install -e .[dev]
 
       - name: Run unittest tests in pure python mode
         run: |
@@ -71,17 +72,18 @@ jobs:
       - name: Install dependencies
         run: |
           python -m pip install --upgrade pip
-          pip install build twine
+          python -m pip install -e .[dev]
+          python -m pip install twine
 
       - name: Build package
         run: python -m build
 
-      - name: Publish package to Test PyPI
+      - name: Publish package to PyPI
         run: |
-          python -m twine upload --repository-url https://test.pypi.org/legacy/ dist/* --skip-existing --verbose --non-interactive
+          python -m twine upload dist/* --skip-existing --verbose --non-interactive
         env:
           TWINE_USERNAME: __token__
-          TWINE_PASSWORD: ${{ secrets.TEST_PYPI_API_TOKEN }}
+          TWINE_PASSWORD: ${{ secrets.PYPI_API_TOKEN }}
 
   deploy-exts:
     needs: build
@@ -103,17 +105,18 @@ jobs:
     - name: Install dependencies
       run: |
         python -m pip install --upgrade pip
-        pip install build twine
+        python -m pip install -e .[dev]
+        python -m pip install twine
 
     - name: Build extensions package
       run: |
         cd py_ballisticcalc_exts
         python -m build --outdir ../dist
         cd ..
 
-    - name: Publish package to Test PyPI
+    - name: Publish package to PyPI
       run: |
-        python -m twine upload --repository-url https://test.pypi.org/legacy/ dist/* --skip-existing --verbose --non-interactive
+        python -m twine upload dist/* --skip-existing --verbose --non-interactive
       env:
         TWINE_USERNAME: __token__
-        TWINE_PASSWORD: ${{ secrets.TEST_PYPI_API_TOKEN }}
+        TWINE_PASSWORD: ${{ secrets.PYPI_API_TOKEN }}

.github/workflows/python-publish.yml

@@ -40,7 +40,8 @@ jobs:
           sudo apt-get install build-essential -y
 
           python -m pip install --upgrade pip
-          python -m pip install setuptools pytest cython
+          python -m pip install setuptools cython
+          python -m pip install -e .[dev]
 
       - name: Run unittest tests in pure python mode
         run: |
@@ -82,17 +83,17 @@ jobs:
     - name: Install dependencies
       run: |
         python -m pip install --upgrade pip
-        pip install build twine
+        python -m pip install -e .[dev]
+        python -m pip install twine
 
     - name: Build package
       run: python -m build
 
-    - name: Publish package to PyPI
-      run: |
-        python -m twine upload dist/* --skip-existing --verbose --non-interactive
-      env:
-        TWINE_USERNAME: __token__
-        TWINE_PASSWORD: ${{ secrets.PYPI_API_TOKEN }}
+    - name: Publish package to Test PyPI
+      uses: pypa/gh-action-pypi-publish@release/v1
+      with:
+        user: __token__
+        password: ${{ secrets.PYPI_API_TOKEN }}
 
   deploy-exts:
     needs: [build, deploy]
@@ -114,17 +115,17 @@ jobs:
       - name: Install dependencies
         run: |
           python -m pip install --upgrade pip
-          pip install build twine
+          python -m pip install -e .[dev]
+          python -m pip install twine
 
       - name: Build extensions package
         run: |
           cd py_ballisticcalc_exts
           python -m build --outdir ../dist
           cd ..
 
-      - name: Publish package to PyPI
-        run: |
-          python -m twine upload dist/* --skip-existing --verbose --non-interactive
-        env:
-          TWINE_USERNAME: __token__
-          TWINE_PASSWORD: ${{ secrets.PYPI_API_TOKEN }}
+      - name: Publish package to Test PyPI
+        uses: pypa/gh-action-pypi-publish@release/v1
+        with:
+          user: __token__
+          password: ${{ secrets.PYPI_API_TOKEN }}

Manifest.in

@@ -2,3 +2,5 @@ prune py_ballisticcalc_exts
 prune tests
 include py.typed
 include Example.ipynb
+include LICENSE
+include README.md

examples/kanik_50bmg_aid_shooting.py

@@ -0,0 +1,92 @@
+"""Example of library usage"""
+import math
+
+from py_ballisticcalc import *
+
+
+# set global library settings
+PreferredUnits.velocity = Velocity.MPS
+PreferredUnits.adjustment = Angular.Mil
+PreferredUnits.temperature = Temperature.Celsius
+PreferredUnits.distance = Distance.Meter
+PreferredUnits.sight_height = Distance.Centimeter
+PreferredUnits.drop = Distance.Centimeter
+
+
+# set_global_use_powder_sensitivity(True)  # enable muzzle velocity correction my powder temperature
+
+# define params with default prefer_units
+length = Distance.Inch(2.3)
+
+weapon = Weapon(sight_height=Unit.Centimeter(9.5), twist=15)
+dm = DragModel(0.62, TableG1, 661, 0.51)
+ammo = Ammo(dm, 900)
+
+zero_atmo = Atmo(
+    altitude=Unit.Meter(150),
+    pressure=Unit.hPa(1000),
+    temperature=Unit.Celsius(15),
+    humidity=50
+)
+zero = Shot(weapon=weapon, ammo=ammo, atmo=zero_atmo)
+zero_distance = Distance.Meter(500)
+
+calc = Calculator()
+calc.set_weapon_zero(zero, zero_distance)
+
+shot = Shot(look_angle=Unit.Degree(20), weapon=weapon, ammo=ammo, atmo=zero_atmo)
+shot_result = calc.fire(shot, Distance.Meter(1000), Distance.Meter(100))
+
+from pprint import pprint
+fieldsss = TrajectoryData._fields
+
+# for p in shot_result:
+#
+#     # table = [{fieldsss[i]: it} for i, it in enumerate(p.in_def_units())]
+#     #
+#     # pprint(table)
+#     print(p.in_def_units(),  ",")
+
+
+def calculate_lead_angle(target_speed, target_size, bullet_speed, initial_distance, time_of_flight):
+    """
+    Розрахунок кута упередження маючи швидкість і розмір цілі, швидкість кулі, початкову відстань до цілі.
+
+    :param target_speed: Швидкість цілі (м/с)
+    :param target_size: Довжина цілі (м)
+    :param bullet_speed: Швидкість кулі (м/с)
+    :param initial_distance: Початкова відстань до цілі (м)
+    :return: Кут упередження в градусах
+    """
+    # Час польоту кулі
+    # time_of_flight = initial_distance / bullet_speed
+
+    # Відстань, яку пройде ніс цілі
+    # distance_nose_travel = target_speed * time_of_flight + target_size
+    distance_nose_travel = target_speed * time_of_flight + target_size
+
+    # Обчислення кута упередження
+    lead_angle = math.atan(distance_nose_travel / initial_distance)
+
+    # Перетворення кута в градуси
+    lead_angle_degrees = math.degrees(lead_angle)
+
+    return lead_angle_degrees
+
+target_speed = 50
+target_size = 3
+max_lead_angle = 6.21
+
+
+for p in shot_result:
+
+    table = [{fieldsss[i]: it} for i, it in enumerate(p.formatted())]
+
+    pprint(table)
+
+# for p in shot_result[1:]:
+#     values = p.in_def_units()
+#     a = calculate_lead_angle(target_speed, target_size, values[2], values[1], values[0])
+#     # if a > max_lead_angle:
+#     #     continue
+#     print(f"{a:.2f}°, {values[1]:.0f}m, {values[2]:.0f}m/s")

py_ballisticcalc/__init__.py

@@ -9,26 +9,26 @@
 __credits__ = ["o-murphy", "dbookstaber"]
 
 import os
+import sys
+from typing import Dict, Union, Optional
 
 from .backend import *
-from .drag_tables import *
+from .conditions import *
 from .drag_model import *
+from .drag_tables import *
 from .interface import *
 from .logger import logger
-from .trajectory_data import *
-from .conditions import *
 from .munition import *
+from .trajectory_data import *
 from .unit import *
-from typing import Dict, Union, Optional
 
-try:
-    import tomllib
-except ImportError:
+if sys.version_info[:2] < (3, 11):
     import tomli as tomllib
+else:
+    import tomllib
 
 
 def _load_config(filepath=None):
-
     def find_pybc_toml(start_dir=os.getcwd()):
         """
         Search for the pyproject.toml file starting from the specified directory.
@@ -94,7 +94,6 @@ def _basic_config(filename=None,
                   max_calc_step_size: Optional[Union[float, Distance]] = None,
                   use_powder_sensitivity: bool = False,
                   preferred_units: Optional[Dict[str, Unit]] = None):
-
     """
     Method to load preferred units from file or Mapping
     """
@@ -140,7 +139,6 @@ def _basic_config(filename=None,
     'Ammo',
     'Sight',
     'Unit',
-    'UnitType',
     'UnitAliases',
     'UnitAliasError',
     'UnitTypeError',
@@ -156,9 +154,18 @@ def _basic_config(filename=None,
     'Pressure',
     'Energy',
     'Weight',
-    'Dimension',
     'PreferredUnits',
-    'get_drag_tables_names'
+    'get_drag_tables_names',
 ]
 
-__all__ += ["TableG%s" % n for n in (1, 7, 2, 5, 6, 8, 'I', 'S')]
+# __all__ += ["TableG%s" % n for n in (1, 7, 2, 5, 6, 8, 'I', 'S')]
+__all__ += [
+    'TableG1',
+    'TableG7',
+    'TableG2',
+    'TableG5',
+    'TableG6',
+    'TableG8',
+    'TableGI',
+    'TableGS'
+]

py_ballisticcalc/backend.py

@@ -5,7 +5,7 @@
 
 # try to use cython based backend
 try:
-    from py_ballisticcalc_exts import (TrajectoryCalc,
+    from py_ballisticcalc_exts import (TrajectoryCalc,  # type: ignore
                                        get_global_max_calc_step_size,
                                        get_global_use_powder_sensitivity,
                                        set_global_max_calc_step_size,
@@ -14,7 +14,7 @@
 
     logger.debug("Binary modules found, running in binary mode")
 except ImportError as error:
-    from .trajectory_calc import (TrajectoryCalc,
+    from .trajectory_calc import (TrajectoryCalc,  # type: ignore
                                   get_global_max_calc_step_size,
                                   get_global_use_powder_sensitivity,
                                   set_global_max_calc_step_size,