Traeger HASS component

Component to integrate with Traeger WiFire Grills.

This component will set up the following platforms.

Platform	Description
sensor	Shows various temperature readings from the grill or accessories
climate	Allows temperature control of the grill and probe
number	Allows minutes input to the timer and cook cycles.
switch	Allow SuperSmoke, Keepwarm, and connectivity switch
binary sensor	Show values of boolean entities

Installation (HACS)

1. Add this repository to HACS
2. Search for Traeger in HACS

Installation (Manual)

1. Using the tool of choice open the directory (folder) for your HA configuration (where you find configuration.yaml).
2. If you do not have a custom_components directory (folder) there, you need to create it.
3. In the custom_components directory (folder) create a new folder called traeger.
4. Download all the files from the custom_components/traeger/ directory (folder) in this repository.
5. Place the files you downloaded in the new directory (folder) you created.
6. Restart Home Assistant
7. In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "Traeger"

Platform Details

Some of the platforms are fairly self-explanatory, others could use a little more explaining. Below are more details on some of those platforms.

Grill State Sensor

This sensor aligns with the status values in the Traeger app.

State	Description
offline	Powered off (or not accessible)
sleeping	Standing by (power switch on, screen off)
idle	Standing by (power switch on, screen on)
igniting	Igniting the fire pot
preheating	Ignition is complete, heating to set temperature
manual_cook	Cooking mode
custom_cook	Cooking mode, using preset cook cycle
cool_down	Cool down cycle
shutdown	Cool down cycle complete, heading to sleep
unknown	Unknown state, report to developers

Heating State Sensor

This sensor tries to provide more useful insight into the heating status of the grill. Many of these values can be trigger off of to provide notifications that are not available in the Traeger app.

State	Description
idle	Not in igniting, preheating, cooking or cool_down modes
preheating	Igniting or preheating (and under 165°F)
heating	Trying to get temperature up to new target temperature
cooling	Trying to get temperature down to new target temperature
at_temp	Temperature has reached the target temperature (and is holding at ±20°F of target temperature)
over_temp	Was at_temp, but is now more than 20°F above target temperature
under_temp	Was at_temp, but is now more than 20°F below target temperature
cool_down	Cool down cycle

Probe State Sensor

This sensor provides triggers for useful probe events such as being close to the target temperature or reaching the target temperature.

State	Description
idle	Probe target temperature is not set (or grill is not in igniting, preheating or cooking modes)
set	Probe target temperature is set
close	Probe temperature is within 5°F of target temperature
at_temp	Probe alarm has fired
fell_out	Probe probably fell out of the meat (Probe temperature is greater than 215°F)

Cook Cycle Number

This number indicates the current cook step. It runs the cook cycle as called by the set_custom_cook service.

State	Description
number.cook_cycl_step	Full list of cook steps. Must be set by set_custom_cook.
number.prev_step	The previous step.
number.curr_step	The current step.
number.next_step	The next step.

set_custom_cook Service

Service to set the list of steps for a cook sequence. The service must be against number.____cook_cycle.

See Developer Tools : SERVICES : Traeger: Set Cook Cycle for a default cook steps list.

Step Type	Description
service[].set_temp	Set Grill Temp. *Only up to your grill's MaxTemp.
service[].smoke	Set Smoke Mode 1 or 0. *Only Avail if grill supports.
service[].keepwarm	Set keepwarm, Mode 1 or 0.
service[].time_set	Set Timer in Minutes.
service[].use_timer	Use Timer to Advance State. *Only applies to current state.
service[].min_delta	Min DELTA temp between Grill and Probe. *Requires max_grill_delta_temp.
service[].max_grill_delta_temp	Max Temp it will increase to from probe min_delta. *Requires min_delta.
service[].act_temp_adv	Grill Temp at which the State will advance.
service[].probe_act_temp_adv	Probe Temp at which the State will advance.
service[].shutdown	Call Grill Shutdown.

InAction DEMO

Configuration is done in the UI

Contributions are welcome!

If you want to contribute to this please read the Contribution guidelines

---