Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 101.

Process completed with exit code 1.

Process completed with exit code 1.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

Process completed with exit code 101.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:71 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^ help: try: `*IOV_MAX` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:49 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^^^^ help: try: `queue.len()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:71 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^ help: try: `*IOV_MAX` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:49 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^^^^ help: try: `queue.len()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:71 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^ help: try: `*IOV_MAX` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:49 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^^^^ help: try: `queue.len()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: unused import: `cglue::prelude::v1::*` --> mfio/src/io/mod.rs:78:5 | 78 | use cglue::prelude::v1::*; | ^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:71 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^ help: try: `*IOV_MAX` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:49 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^^^^ help: try: `queue.len()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: unused import: `cglue::prelude::v1` --> mfio/src/io/mod.rs:78:5 | 78 | use cglue::prelude::v1::*; | ^^^^^^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:71 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^ help: try: `*IOV_MAX` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:49 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^^^^ help: try: `queue.len()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:71 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^ help: try: `*IOV_MAX` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:49 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^^^^ help: try: `queue.len()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:71 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^ help: try: `*IOV_MAX` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:49 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^^^^ help: try: `queue.len()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: unused import: `cglue::prelude::v1::*` --> mfio/src/io/mod.rs:78:5 | 78 | use cglue::prelude::v1::*; | ^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:71 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^ help: try: `*IOV_MAX` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast

warning: casting to the same type is unnecessary (`usize` -> `usize`) --> mfio-rt/src/native/impls/io_uring/tcp_stream.rs:116:49 | 116 | msg.msg_iovlen = core::cmp::min(queue.len() as usize, *IOV_MAX as usize) as _; | ^^^^^^^^^^^^^^^^^^^^ help: try: `queue.len()` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_cast = note: `#[warn(clippy::unnecessary_cast)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: unused import: `cglue::prelude::v1` --> mfio/src/io/mod.rs:78:5 | 78 | use cglue::prelude::v1::*; | ^^^^^^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: associated function `null` is never used --> mfio-rt/src/util.rs:128:12 | 127 | impl RawBox { | ----------- associated function in this implementation 128 | pub fn null() -> Self { | ^^^^

warning: function `new_socket` is never used --> mfio-rt/src/native/impls/unix_extra.rs:19:15 | 19 | pub(crate) fn new_socket( | ^^^^^^^^^^

warning: function `new_for_addr` is never used --> mfio-rt/src/native/impls/unix_extra.rs:7:15 | 7 | pub(crate) fn new_for_addr( | ^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: associated function `null` is never used --> mfio-rt/src/util.rs:128:12 | 127 | impl RawBox { | ----------- associated function in this implementation 128 | pub fn null() -> Self { | ^^^^

warning: function `new_socket` is never used --> mfio-rt/src/native/impls/unix_extra.rs:19:15 | 19 | pub(crate) fn new_socket( | ^^^^^^^^^^

warning: function `new_for_addr` is never used --> mfio-rt/src/native/impls/unix_extra.rs:7:15 | 7 | pub(crate) fn new_for_addr( | ^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: associated function `null` is never used --> mfio-rt/src/util.rs:128:12 | 127 | impl RawBox { | ----------- associated function in this implementation 128 | pub fn null() -> Self { | ^^^^

warning: function `new_socket` is never used --> mfio-rt/src/native/impls/unix_extra.rs:19:15 | 19 | pub(crate) fn new_socket( | ^^^^^^^^^^

warning: function `new_for_addr` is never used --> mfio-rt/src/native/impls/unix_extra.rs:7:15 | 7 | pub(crate) fn new_for_addr( | ^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: unused import: `cglue::prelude::v1::*` --> mfio/src/io/mod.rs:78:5 | 78 | use cglue::prelude::v1::*; | ^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: associated function `null` is never used --> mfio-rt/src/util.rs:128:12 | 127 | impl RawBox { | ----------- associated function in this implementation 128 | pub fn null() -> Self { | ^^^^

warning: function `new_socket` is never used --> mfio-rt/src/native/impls/unix_extra.rs:19:15 | 19 | pub(crate) fn new_socket( | ^^^^^^^^^^

warning: function `new_for_addr` is never used --> mfio-rt/src/native/impls/unix_extra.rs:7:15 | 7 | pub(crate) fn new_for_addr( | ^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: unused import: `cglue::prelude::v1` --> mfio/src/io/mod.rs:78:5 | 78 | use cglue::prelude::v1::*; | ^^^^^^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: associated function `null` is never used --> mfio-rt/src/util.rs:128:12 | 127 | impl RawBox { | ----------- associated function in this implementation 128 | pub fn null() -> Self { | ^^^^

warning: function `new_socket` is never used --> mfio-rt/src/native/impls/unix_extra.rs:19:15 | 19 | pub(crate) fn new_socket( | ^^^^^^^^^^

warning: function `new_for_addr` is never used --> mfio-rt/src/native/impls/unix_extra.rs:7:15 | 7 | pub(crate) fn new_for_addr( | ^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: associated function `null` is never used --> mfio-rt/src/util.rs:128:12 | 127 | impl RawBox { | ----------- associated function in this implementation 128 | pub fn null() -> Self { | ^^^^

warning: function `new_socket` is never used --> mfio-rt/src/native/impls/unix_extra.rs:19:15 | 19 | pub(crate) fn new_socket( | ^^^^^^^^^^

warning: function `new_for_addr` is never used --> mfio-rt/src/native/impls/unix_extra.rs:7:15 | 7 | pub(crate) fn new_for_addr( | ^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: this `RefCell` reference is held across an `await` point --> mfio-netfs/src/net/server.rs:371:41 | 371 | ... read_dir_streams.borrow().get(stream_id as usize) | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: ensure the reference is dropped before calling `await` note: these are all the `await` points this reference is held through --> mfio-netfs/src/net/server.rs:373:78 | 373 | ... let stream_buf = &mut *stream.lock().await; | ^^^^^ ... 383 | ... .await; | ^^^^^ = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#await_holding_refcell_ref = note: `#[warn(clippy::await_holding_refcell_ref)]` on by default

warning: associated function `null` is never used --> mfio-rt/src/util.rs:128:12 | 127 | impl RawBox { | ----------- associated function in this implementation 128 | pub fn null() -> Self { | ^^^^

warning: function `new_socket` is never used --> mfio-rt/src/native/impls/unix_extra.rs:19:15 | 19 | pub(crate) fn new_socket( | ^^^^^^^^^^

warning: function `new_for_addr` is never used --> mfio-rt/src/native/impls/unix_extra.rs:7:15 | 7 | pub(crate) fn new_for_addr( | ^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: unused import: `cglue::prelude::v1::*` --> mfio/src/io/mod.rs:78:5 | 78 | use cglue::prelude::v1::*; | ^^^^^^^^^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

warning: redundant guard --> mfio-rt/src/util.rs:44:39 | 44 | (Some(_), Some(b)) if b == Component::ParentDir => return None, | ^^^^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards help: try | 44 - (Some(_), Some(b)) if b == Component::ParentDir => return None, 44 + (Some(_), Some(Component::ParentDir)) => return None, |

warning: redundant guard --> mfio-rt/src/util.rs:43:39 | 43 | (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), | ^^^^^^^^^^^^^^^^^^^^^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_guards = note: `#[warn(clippy::redundant_guards)]` on by default help: try | 43 - (Some(a), Some(b)) if b == Component::CurDir => comps.push(a), 43 + (Some(a), Some(Component::CurDir)) => comps.push(a), |

warning: associated function `null` is never used --> mfio-rt/src/util.rs:128:12 | 127 | impl RawBox { | ----------- associated function in this implementation 128 | pub fn null() -> Self { | ^^^^

warning: function `new_socket` is never used --> mfio-rt/src/native/impls/unix_extra.rs:19:15 | 19 | pub(crate) fn new_socket( | ^^^^^^^^^^

warning: function `new_for_addr` is never used --> mfio-rt/src/native/impls/unix_extra.rs:7:15 | 7 | pub(crate) fn new_for_addr( | ^^^^^^^^^^^^ | = note: `#[warn(dead_code)]` on by default

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:54:17 | 54 | / pos.checked_sub((-val) as u64) 55 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |______________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations

warning: unnecessary closure used to substitute value for `Option::None` --> mfio/src/stdeq.rs:40:21 | 40 | / end.checked_sub((-val) as u64) 41 | | .ok_or_else(|| std::io::ErrorKind::InvalidInput)? | |__________________________----------------------------------------------^ | | | help: use `ok_or(..)` instead: `ok_or(std::io::ErrorKind::InvalidInput)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_lazy_evaluations = note: `#[warn(clippy::unnecessary_lazy_evaluations)]` on by default

warning: this lifetime isn't used in the impl --> mfio/src/futures_compat.rs:112:6 | 112 | impl<'a, Io: ?Sized + stdeq::StreamPos<u64>> FuturesCompat for Io {} | ^^ | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#extra_unused_lifetimes = note: `#[warn(clippy::extra_unused_lifetimes)]` on by default

warning: unused import: `cglue::prelude::v1` --> mfio/src/io/mod.rs:78:5 | 78 | use cglue::prelude::v1::*; | ^^^^^^^^^^^^^^^^^^ | = note: `#[warn(unused_imports)]` on by default

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/