Skip to content

BUILD

Jump to bottom Edit New page
brius56 edited this page Apr 11, 2024 · 34 revisions

BUILD

  1. Fetch dependencies

    • Ubuntu Mantic (23.10): autoconf autoconf2.13 autoconf-archive automake autotools-dev build-essential ca-certificates cmake curl git libatomic1 libgraphicsmagick1-dev libgraphicsmagick-q16-3 libicu-dev libjemalloc2 libjemalloc-dev liblz4-1 liblz4-dev libmagic1 libmagic-dev libnss-db libpng16-16 libpng-dev libsodium23 libsodium-dev libssl3 libssl-dev libtool liburing2 liburing-dev libzstd1 libzstd-dev shtool xxd xz-utils libboost-chrono1.81.0 libboost-chrono1.81-dev libboost-context1.81.0 libboost-context1.81-dev libboost-coroutine1.81.0 libboost-coroutine1.81-dev libboost-system1.81.0 libboost-system1.81-dev libboost-thread1.81.0 libboost-thread1.81-dev

    • Ubuntu Jammy (22.04): autoconf autoconf2.13 autoconf-archive automake autotools-dev build-essential ca-certificates cmake curl git libatomic1 libboost-chrono1.74.0 libboost-chrono1.74-dev libboost-context1.74.0 libboost-context1.74-dev libboost-coroutine1.74.0 libboost-coroutine1.74-dev libboost-system1.74.0 libboost-system1.74-dev libboost-thread1.74.0 libboost-thread1.74-dev libgraphicsmagick1-dev libgraphicsmagick-q16-3 libicu-dev libjemalloc2 libjemalloc-dev liblz4-1 liblz4-dev libmagic1 libmagic-dev libnss-db libpng16-16 libpng-dev libsctp1 libsctp-dev libsodium23 libsodium-dev libssl3 libssl-dev libtool libzstd1 libzstd-dev llvm-spirv mesa-opencl-icd ocl-icd-opencl-dev shtool xxd xz-utils

    • Ubuntu Focal (20.04): autoconf autoconf2.13 autoconf-archive automake autotools-dev build-essential ca-certificates cmake curl git libatomic1 libboost-chrono1.71 libboost-chrono1.71-dev libboost-context1.71 libboost-context1.71-dev libboost-coroutine1.71 libboost-coroutine1.71-dev libboost-system1.71 libboost-system1.71-dev libboost-thread1.71 libboost-thread1.71-dev libgraphicsmagick1-dev libgraphicsmagick-q16-3 libicu-dev libjemalloc2 libjemalloc-dev liblz4-1 liblz4-dev libmagic1 libmagic-dev libnss-db libpng16-16 libpng-dev libsctp1 libsctp-dev libsodium23 libsodium-dev libssl3 libssl-dev libtool libzstd1 libzstd-dev llvm-spirv mesa-opencl-icd ocl-icd-opencl-dev shtool xxd xz-utils

    ❗ THE COMPLETE SOURCE-CODE OF ROCKSDB MUST BE AVAILABLE TO BUILD CONSTRUCT. This is different from the include/ and lib/ files installed by your distribution's package system. Most platforms do not have to build the source, but it must be available.

    git submodule update --init deps/rocksdb
cd deps/rocksdb
git fetch --tags --force
git checkout v7.4.3

    👉 For best performance and stability, please check for the version available on your system and match that with the git checkout command above.

  2. Review special requirements for your platform

    • Ubuntu

      You must configure Construct with the option --with-included-rocksdb. This will fetch and properly build rocksdb.

      Ubuntu builds their library with -Bsymbolic-functions. This conflicts with the requirements of Construct's embedding.

    • Ubuntu Bionic (18.04) and earlier

      Remove boost1.71 from the package list in the earlier section; add --with-included-boost to ./configure when instructed below.

  3. Review the installation layout

    At this time it is suggested to supply ./configure with a --prefix path, especially for development. Example --prefix=$HOME/.local/.

    • Binary executable $prefix/bin/construct
    • Shared library $prefix/lib/libircd.so
    • Shared library modules $prefix/lib/modules/construct/*.so
    • Header files $prefix/include/ircd/*
    • Read-only shared assets $prefix/share/construct/*
    • Database directory may be established at $prefix/var/db/construct/

  4. Build Construct

    ❗ Any --with-included-* option to configure will fetch, configure and build the dependencies included as submodules. The result cannot be installed on the system without this repository remaining intact. Please review the special requirements first to understand which options you need or don't need on your system.

    👉 Do not set your --prefix path to a directory inside your git repository or an invocation of git clean will erase your database in $prefix/var/db/.

    export CXX=clang++
export CC=clang

./autogen.sh
./configure --prefix=$HOME/construct_sysroot
make install
REBUILDING FOR UPDATES

Until #84 is resolved, updates to the repository (from e.g. git pull) or the system may cause complications with incremental builds using make(1). For this reason we advise a "from scratch" build preceded by an invocation of git clean; example:

git reset --hard  &&  git clean -f -x -d
./autogen.sh
./configure --prefix=...

DEVELOPMENT BUILDS

Those wishing to contribute new functionality or diagnose difficult bugs will benefit from several configuration options. This configuration generates a significant amount of additional code and instrumentation, in addition to full debug logging. The server may consume additional CPU and memory resources.

❗ Until the resolution of #84 it is advised to sterilize the build environment before any re-./configure.

All --with-included- and other platform-specific build options remain the same and must be applied to these recipes.

./configure --prefix=... --enable-debug --enable-optimize --with-assert=trap --disable-lto
  • Release optimization is always enabled; we only advise the removal of --enable-optimize when it is necessary to diagnose specific difficult issues.
  • It is much easier to debug, step, and fiddle with a live program rather than a dead one. --with-assert=trap gives the developer a choice to note the issue and continue the program at their discretion (If you aren't sure about an assert: terminate immediately!).
  • Disabling LTO is advised to reduce significant delays during the linking phase of every make during development.

Additional Build Options

Debug mode

--enable-debug

Full debug mode. Includes additional code within #ifdef RB_DEBUG sections. Optimization level is -Og, which is still valgrind-worthy. Debugger support is -ggdb. Log level is DEBUG (maximum). Assertions are enabled. No sanitizer instrumentation is generated by default in this mode.

Generic mode binary (for distribution packages)

Construct developers have set the default compilation to generate native hardware operations which may only be supported on very specific targets. For a generic mode binary, package maintainers may require this option.

--enable-generic

Sets -mtune=generic as native is otherwise the default.

Compact mode (experimental)

--enable-compact

Create the smallest possible resulting output. This will optimize for size (if optimization is enabled), remove all debugging, strip symbols, and apply any toolchain-feature or #ifdef in code that optimizes the output size.

This feature is experimental. It may not build or execute on all platforms reliably. Please report bugs.

Manually enable assertions

--enable-assert

Implied by --enable-debug. This is useful to specifically enable assert() statements when --enable-debug is not used.

--with-assert=trap

Recommended when using --enable-assert for functional-testing and debugging. This replaces the default mechanism of assertion with traps rather than aborts; allowing developers to explore an unterminated program.

--with-assert=opt

Optimistic assertions are branchless and generate less code than other modes. Assertion failure is only detected at the end of each core event loop iteration; intended to minimally reveal the existence of a failure and much harder to debug.

Manually enable optimization

--enable-optimize

This manually applies full release-mode optimizations even when using --enable-debug. Implied when not in debug mode.

Disable link-time optimization (LTO)

--disable-lto

LTO is enabled when optimization is enabled (and when the toolchain supports it). When developing in optimized mode, disabling LTO is strongly advised to reduce excessive link times.

Disable third-party dynamic allocator libraries

--disable-malloc-libs

./configure will detect alternative malloc() implementations found in libraries installed on the system (jemalloc/tcmalloc/etc). Construct developers may enable these to be configured by default, if detected. To always prevent any alternative to the default standard library allocator specify this option.

Enable third-party dynamic allocator libraries

Currently:

--disable-jemalloc

./configure will detect alternative malloc() implementations found in libraries installed on the system (jemalloc/tcmalloc/etc). These are recommended for best performance.

Logging level

--with-log-level=

This manually sets the level of logging. All log levels at or below this level will be available. When a log level is not available, all code used to generate its messages will be entirely eliminated via dead-code-elimination at compile time.

The log levels are (from logger.h):

7   ⚪ DEBUG      Maximum verbosity for developers.
6   ⚪ DWARNING   A warning but only for developers (more frequent than WARNING).
5   ⚪ DERROR     An error but only worthy of developers (more frequent than ERROR).
4   🟢 INFO       A more frequent message with good news.
3   🔵 NOTICE     An infrequent important message with neutral or positive news.
2   🟡 WARNING    Non-impacting undesirable behavior user should know about.
1   🔴 ERROR      Things that shouldn't happen; user impacted and should know.
0   ⭕ CRITICAL   Catastrophic/unrecoverable; program is in a compromised state.

When --enable-debug is used --with-log-level=DEBUG is implied. Otherwise for release mode --with-log-level=INFO is implied. Large deployments with many users may consider lower than INFO to maximize optimization and reduce noise.

Add a custom footer

Clone this wiki locally