Skip to content

malcolmlewis/smi2021

 
 

Repository files navigation

smi2021

The purpose of this repository is to merge and clean up several of the forks available. A merge into the mainline kernel seems possible; the binary blob is under the GPL, but we don't have the source.

Minimal requirement

  • Kernel version must be greater than or equal to 3.12

Installing

From you distro.

Ready distro:

If you've packaged it for another distro, please send me the link and I'll add it.

Manual build and installation

Get source

git clone git://github.com/Manouchehri/smi2021.git
cd smi2021/

Build

You can build that module one of the two options: as internal or as external (out-of-tree) module.

if you have been collecting both ways - don't forget that in every way the final installation path of the module are different:

internal = /lib/modules/`uname -r`/kernel/drivers/media/usb/smi2021/smi2021.ko

external = /lib/modules/`uname -r`/extra/smi2021.ko

It might be possible - two different module will be in two different place at the same time - don't forget to delete the old module if you change the type of Assembly.

  1. Build as internal:
  2. Place folder smi2021 from Get source step in you kernel source tree into folder drivers/media/usb/
  3. In menuconfig (or other configuration utilits as xmenuconfig, etc...) Chose Device Drivers -> Multimedia support -> Media USB Adapters -> Somagic SMI2021 USB video/audio capture support as module or build-in
  4. Build you kernel with modules and instal it. If you chose Somagic SMI2021 USB video/audio capture support as module - install modules too.
> On build it as module - that module installs in ```/lib/modules/`uname -r`/kernel/drivers/media/usb/smi2021/smi2021.ko```
  1. Build as external (out-of-tree) module.
  2. You MUST verify all dependency: - VIDEO_DEV && I2C && SND && USB - SND_PCM - VIDEO_SAA711X = Device Drivers -> Multimedia support -> Encoders, decoders, sensors and other helper chips -> Philips SAA7111/3/4/5 video decoders - VIDEOBUF2_VMALLOC = I simple chose in menuconfig: Device Drivers -> Multimedia support -> Media USB Adapters -> USB Video Class - it have needed dependency for VIDEOBUF2_VMALLOC
> Im most case, in blank `Encoders, decoders, sensors and other helper chips` and `Media USB Adapters` - when you not select `Cameras/video grabbers support`.
> Also sufficient **UN**select `Autoselect ancillary drivers (tuners, sensors, i2c, frontends)` for view `Encoders, decoders, sensors and other helper chips` in list. 
  1. As is "https://www.kernel.org/doc/Documentation/kbuild/modules.txt".
> NOTE: "modules_prepare" will not build Module.symvers even if CONFIG_MODVERSIONS is set; therefore, a full kernel build needs to be executed to make module versioning work.

To build against the running kernel use: make -C /lib/modules/`uname -r`/build M=$PWD 3. Build module with run make in source directory. You can use targets: modules as default modules_install clean help and clean_all. You can use env CROSS_COMPILE, ARCH, KDIR and -j too. 4. Install builded module with make modules_install.

> NOTE: It installs in ```/lib/modules/`uname -r`/extra/smi2021.ko```

Install firmware

After installing the module, you will have to copy firmware/smi2021_3c.bin (md5sum: 90f78491e831e8db44cfdd6204a2b602) as /usr/lib/firmware/smi2021_3c.bin. If you Google the hash, you'll find guides that explain how to extract it.

Module parameters

  • forceasgm - default 0. If set to 1 chipset version be set as gm7113C - supported now version in saa7115 modules. In kernel command line it look like smi2021.forceasgm=1. In build as internal module we can set VIDEO_SMI2021_INIT_AS_GM7113C, but that not recommended, as module parameter present.
  • monochrome - default 0. If set to 1 on init output be in monochrome mode only.
  • chiptype - default 0. You can skip autodetection and set chip version directly: 1 = gm7113C, 2 = saa7113.
    • NOTICE: if you set 1 (gm7113C) - saa7115 module can incorrectly detect you chip, because now present some change in registry out and that part in under development. For module work as before - NEED use forceasgm=1
    • NOTICE: chiptype NOT override version for other kernel module. For module work as before - NEED use forceasgm=1

Troubleshooting

  • monochrome output or no output - you need check, what saa7115 module proper init you device (need once on first install, or new linux distrib, or with new smi2021 device(for proper check what they detected correct)). For that check, you need
    1. load saa7115 modules with debug: modprobe -r saa7115; modprobe saa7115 debug=1
    2. load smi2021 and check dmesg: must be string like: saa7115 8-004a: gm7113c found @ 0x94 (smi2021) If detection not work, or work notproper - try use forceasgm=1 module option. For build as part of kernel and use override - be added additional options in Kconfig.

Credits

David Manouchehri - [email protected]

Jon Arne Jørgensen - [email protected]

mastervolkov - [email protected]

https://github.com/Manouchehri/smi2021

https://github.com/jonjonarnearne/smi2021

About

smi2021 v4l2 kernel driver

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C 98.0%
  • Makefile 2.0%