Moved Fritzing assets to their own folder.

luisdelarosa · Oct 4, 2017 · 5ecc6cb · 5ecc6cb
1 parent 19dddba
commit 5ecc6cb
Show file tree

Hide file tree

Showing 3 changed files with 1 addition and 1 deletion.
diff --git a/blink_hardware.fzz → Fritzing/blink_hardware.fzz b/blink_hardware.fzz → Fritzing/blink_hardware.fzz
diff --git a/fritzing.png → Fritzing/fritzing.png b/fritzing.png → Fritzing/fritzing.png
diff --git a/README.md b/README.md
@@ -8,7 +8,7 @@ To set up:
 - Connect a red LED to ground (use the short leg)
 - Connect a 100 Ohm (or larger) resistor to the same breadboard row that has the red LED's long leg
 - Connect a wire from the Raspberry Pi's GPIO pin 17 (a GPIO breakout board, aka T-Cobbler helps a lot)
-![Fritizing diagram of Raspberry Pi with LED and resistor on breadboard](./fritzing.png)
+![Fritizing diagram of Raspberry Pi with LED and resistor on breadboard](./Fritzing/fritzing.png)
 
 Then execute at a command prompt on the Raspberry Pi:
 ```