[fi] Add Ibex tests

fault_injection/configs/chip_test.yaml

@@ -0,0 +1,51 @@
+target:
+  target_type: chip
+  fw_bin: "../objs/sca_ujson_chip_signed.img"
+  output_len_bytes: 16
+  target_clk_mult: 1
+  target_freq: 100000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyUSB1"
+  usb_serial: "205F355C3236"
+fisetup:
+  fi_gear: "dummy"
+  fi_type: "voltage_glitch"
+  # Parameter generation.
+  parameter_generation: "random"
+  # Number of randomized iterations for the parameter sweep.
+  # For parameter_generation: "random", this is the number of iterations.
+  # For parameter_generation: "deterministic", this is the number of iterations
+  # per fixed parameter.
+  num_iterations: 100
+  # Voltage glitch width in ns.
+  glitch_voltage_min: 2.7
+  glitch_voltage_max: 3.3
+  glitch_voltage_step: 0.05
+  # Voltage glitch width in ns.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in ns.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "otbn_char_unrolled_reg_op_loop"
+  expected_result: '{"loop_counter":100,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.address_translation.cw310.yaml

@@ -0,0 +1,44 @@
+target:
+  target_type: cw310
+  fpga_bitstream: "../objs/lowrisc_systems_chip_earlgrey_cw310_0.1.bit"
+  force_program_bitstream: False
+  fw_bin: "../objs/sca_ujson_fpga_cw310.bin"
+  output_len_bytes: 16
+  target_clk_mult: 0.24
+  target_freq: 24000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyACM4"
+fisetup:
+  fi_gear: "husky"
+  fi_type: "voltage_glitch"
+  parameter_generation: "random"
+  # Voltage glitch width in cycles.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in cycles.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+  # Number of iterations for the parameter sweep.
+  num_iterations: 100
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "ibex_address_translation"
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.address_translation_config.cw310.yaml

@@ -0,0 +1,44 @@
+target:
+  target_type: cw310
+  fpga_bitstream: "../objs/lowrisc_systems_chip_earlgrey_cw310_0.1.bit"
+  force_program_bitstream: False
+  fw_bin: "../objs/sca_ujson_fpga_cw310.bin"
+  output_len_bytes: 16
+  target_clk_mult: 0.24
+  target_freq: 24000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyACM4"
+fisetup:
+  fi_gear: "husky"
+  fi_type: "voltage_glitch"
+  parameter_generation: "random"
+  # Voltage glitch width in cycles.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in cycles.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+  # Number of iterations for the parameter sweep.
+  num_iterations: 100
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "ibex_address_translation_config"
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.char.conditional_branch.cw310.yaml

@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_conditional_branch"
-  expected_result: '{"result1":10001,"result2":0,"err_status":0}'
+  expected_result: '{"result1":10001,"result2":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.char.csr_read.cw310.yaml

@@ -0,0 +1,44 @@
+target:
+  target_type: cw310
+  fpga_bitstream: "../objs/lowrisc_systems_chip_earlgrey_cw310_0.1.bit"
+  force_program_bitstream: False
+  fw_bin: "../objs/sca_ujson_fpga_cw310.bin"
+  output_len_bytes: 16
+  target_clk_mult: 0.24
+  target_freq: 24000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyACM4"
+fisetup:
+  fi_gear: "husky"
+  fi_type: "voltage_glitch"
+  parameter_generation: "random"
+  # Voltage glitch width in cycles.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in cycles.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+  # Number of iterations for the parameter sweep.
+  num_iterations: 100
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "ibex_char_csr_read"
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.char.csr_write.cw310.yaml

@@ -0,0 +1,44 @@
+target:
+  target_type: cw310
+  fpga_bitstream: "../objs/lowrisc_systems_chip_earlgrey_cw310_0.1.bit"
+  force_program_bitstream: False
+  fw_bin: "../objs/sca_ujson_fpga_cw310.bin"
+  output_len_bytes: 16
+  target_clk_mult: 0.24
+  target_freq: 24000000
+  baudrate: 115200
+  protocol: "ujson"
+  port: "/dev/ttyACM4"
+fisetup:
+  fi_gear: "husky"
+  fi_type: "voltage_glitch"
+  parameter_generation: "random"
+  # Voltage glitch width in cycles.
+  glitch_width_min: 5
+  glitch_width_max: 150
+  glitch_width_step: 3
+  # Range for trigger delay in cycles.
+  trigger_delay_min: 0
+  trigger_delay_max: 500
+  trigger_step: 10
+  # Number of iterations for the parameter sweep.
+  num_iterations: 100
+fiproject:
+  # Project database type and memory threshold.
+  project_db: "ot_fi_project"
+  project_mem_threshold: 10000
+  # Store FI plot.
+  show_plot: True
+  num_plots: 10
+  plot_x_axis: "trigger_delay"
+  plot_x_axis_legend: "[cycles]"
+  plot_y_axis: "glitch_width"
+  plot_y_axis_legend: "[cycles]"
+test:
+  which_test: "ibex_char_csr_write"
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.char.flash_read.cw310.yaml

@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_flash_read"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.char.flash_write.cw310.yaml

@@ -36,4 +36,10 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_flash_write"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True
+

fault_injection/configs/pen.global_fi.ibex.char.register_file.cw310.yaml

@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_register_file"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.char.register_file_read.cw310.yaml

@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_register_file_read"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.char.sram_read.cw310.yaml

@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_sram_read"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.char.sram_write.cw310.yaml

@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_sram_write"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.ibex.char.unconditional_branch.cw310.yaml

@@ -36,4 +36,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "ibex_char_unconditional_branch"
-  expected_result: '{"result":100,"err_status":0}'
+  expected_result: '{"result":100,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.otbn.key_sideload.cw310.yaml

@@ -35,4 +35,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "otbn_key_sideload"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True

fault_injection/configs/pen.global_fi.otbn.load_integrity.cw310.yaml

@@ -35,4 +35,9 @@ fiproject:
   plot_y_axis_legend: "[cycles]"
 test:
   which_test: "otbn_load_integrity"
-  expected_result: '{"result":0,"err_status":0}'
+  expected_result: '{"result":0,"err_status":0,"alerts":0}'
+  # Set to true if the test should ignore alerts returned by the test. As the
+  # alert handler on the device could sometime fire alerts that are not
+  # related to the FI, ignoring is by default set to true. A manual analysis
+  # still can be performed as the alerts are stored in the database.
+  ignore_alerts: True