[spi_dev, dv] Adapt the tpm test for sival

Signed-off-by: Douglas Reis <[email protected]>

hw/top_earlgrey/dv/env/seq_lib/chip_sw_spi_device_tpm_vseq.sv

@@ -65,7 +65,6 @@ class chip_sw_spi_device_tpm_vseq extends chip_sw_base_vseq;
 
       `DV_WAIT(cfg.sw_logger_vif.printed_log == "SYNC: Waiting Read",
              "Timedout waiting for read config.")
-
       // Read transaction
       tpm_txn (.wr(0), .addr(addr), .len(data_q.size()), .rdata_q(rdata_q));
       foreach (rdata_q[i]) begin

sw/device/tests/sim_dv/spi_device_tpm_tx_rx_test.c

@@ -28,6 +28,7 @@ static dif_rv_plic_t plic;
 typedef enum {
   kTpmWriteCommand = 0x0,
   kTpmReadCommand = 0x80,
+  kTpmCommandMask = 0xbf
 } tpm_cmd_t;
 
 enum {
@@ -163,16 +164,18 @@ bool test_main(void) {
       &pinmux, kTopEarlgreyPinmuxPeripheralInSpiDeviceTpmCsb,
       kTopEarlgreyPinmuxInselIoa7));
 
-  dif_pinmux_pad_attr_t out_attr;
-  dif_pinmux_pad_attr_t in_attr = {
-      .slew_rate = 0,
-      .drive_strength = 0,
-      .flags = kDifPinmuxPadAttrPullResistorEnable |
-               kDifPinmuxPadAttrPullResistorUp};
-
-  CHECK_DIF_OK(dif_pinmux_pad_write_attrs(&pinmux, kTopEarlgreyMuxedPadsIoa7,
-                                          kDifPinmuxPadKindMio, in_attr,
-                                          &out_attr));
+  if (kDeviceType == kDeviceSimDV) {
+    dif_pinmux_pad_attr_t out_attr;
+    dif_pinmux_pad_attr_t in_attr = {
+        .slew_rate = 0,
+        .drive_strength = 0,
+        .flags = kDifPinmuxPadAttrPullResistorEnable |
+                 kDifPinmuxPadAttrPullResistorUp};
+
+    CHECK_DIF_OK(dif_pinmux_pad_write_attrs(&pinmux, kTopEarlgreyMuxedPadsIoa7,
+                                            kDifPinmuxPadKindMio, in_attr,
+                                            &out_attr));
+  }
 
   CHECK_DIF_OK(
       dif_spi_device_tpm_configure(&spi_device, kDifToggleEnabled, kTpmConfig));
@@ -215,7 +218,6 @@ bool test_main(void) {
 
     LOG_INFO("SYNC: Waiting Read");
     // Send the written data right back out for reads.
-
     // Wait for read interrupt.
     atomic_wait_for_interrupt();
     // Send the written data right back out for reads.
@@ -228,6 +230,7 @@ bool test_main(void) {
     ack_spi_tpm_header_irq(&spi_device);
 
     // Make sure the received command matches expectation
+    read_command &= kTpmCommandMask;
     LOG_INFO("Expected 0x%x, received 0x%x",
              (kTpmReadCommand | (num_bytes - 1)), read_command);
     CHECK((kTpmReadCommand | (num_bytes - 1)) == read_command,

sw/host/tests/chip/spi_device_tpm_test/BUILD

@@ -0,0 +1,24 @@
+# Copyright lowRISC contributors.
+# Licensed under the Apache License, Version 2.0, see LICENSE for details.
+# SPDX-License-Identifier: Apache-2.0
+
+load("@rules_rust//rust:defs.bzl", "rust_binary")
+
+package(default_visibility = ["//visibility:public"])
+
+rust_binary(
+    name = "spi_device_tpm_test",
+    srcs = [
+        "src/main.rs",
+    ],
+    deps = [
+        "//sw/host/opentitanlib",
+        "//third_party/rust/crates:anyhow",
+        "//third_party/rust/crates:clap",
+        "//third_party/rust/crates:humantime",
+        "//third_party/rust/crates:log",
+        "//third_party/rust/crates:regex",
+        "//third_party/rust/crates:rand",
+        "@crate_index//:object",
+    ],
+)

sw/host/tests/chip/spi_device_tpm_test/src/main.rs

@@ -0,0 +1,79 @@
+// Copyright lowRISC contributors.
+// Licensed under the Apache License, Version 2.0, see LICENSE for details.
+// SPDX-License-Identifier: Apache-2.0
+
+use anyhow::{bail, Result};
+use clap::Parser;
+use regex::Regex;
+use std::path::PathBuf;
+use std::time::Duration;
+
+use opentitanlib::app::TransportWrapper;
+use opentitanlib::execute_test;
+use opentitanlib::test_utils::init::InitializeTest;
+use opentitanlib::tpm::{self, Driver};
+use opentitanlib::uart::console::{ExitStatus, UartConsole};
+
+#[derive(Debug, Parser)]
+struct Opts {
+    #[command(flatten)]
+    init: InitializeTest,
+
+    /// Console receive timeout.
+    #[arg(long, value_parser = humantime::parse_duration, default_value = "600s")]
+    timeout: Duration,
+
+    /// Name of the SPI interface to connect to the OTTF console.
+    #[arg(long, default_value = "TPM")]
+    spi: String,
+
+    /// Path to the firmware's ELF file, for querying symbol addresses.
+    #[arg(value_name = "FIRMWARE_ELF")]
+    firmware_elf: PathBuf,
+}
+
+fn tpm_read_test(opts: &Opts, transport: &TransportWrapper) -> Result<()> {
+    let uart = transport.uart("console")?;
+    let spi = transport.spi(&opts.spi)?;
+    transport.pin_strapping("SPI_TPM")?.apply()?;
+
+    /* Wait sync message. */
+    let _ = UartConsole::wait_for(&*uart, r"SYNC: Begin TPM Test\r\n", opts.timeout)?;
+    let tpm = tpm::SpiDriver::new(spi);
+    const SIZE : usize = 10;
+
+    for _ in 0..10 {
+        let test_data : Vec<u8> = (0..SIZE).map(|_| rand::random()).collect();
+        tpm.write_register(tpm::Register::DATA_FIFO, &test_data)?;
+        let _ = UartConsole::wait_for(&*uart, r"SYNC: Waiting Read\r\n", opts.timeout)?;
+        let mut buffer = [0xFFu8; SIZE];
+        tpm.read_register(tpm::Register::DATA_FIFO, &mut buffer)?;
+        assert_eq!(buffer, &test_data[0..SIZE]);
+    }
+
+    Ok(())
+}
+
+fn main() -> Result<()> {
+    let opts = Opts::parse();
+    opts.init.init_logging();
+
+    let transport = opts.init.init_target()?;
+    execute_test!(tpm_read_test, &opts, &transport,);
+
+    let uart = transport.uart("console")?;
+    let mut console = UartConsole {
+        timeout: Some(opts.timeout),
+        exit_success: Some(Regex::new(r"PASS!\r\n")?),
+        exit_failure: Some(Regex::new(r"FAIL:")?),
+        ..Default::default()
+    };
+
+    // Now watch the console for the exit conditions.
+    let result = console.interact(&*uart, None, Some(&mut std::io::stdout()))?;
+    if result != ExitStatus::ExitSuccess {
+        bail!("FAIL: {:?}", result);
+    };
+
+    Ok(())
+}