[dv,mbx] Adjust logging information

Set logging levels more appropriately for longer sequences and regression runs. Signed-off-by: Adrian Lees <[email protected]>
lowRISC · Dec 5, 2023 · ba34163 · ba34163
1 parent f9d4548
commit ba34163
Showing 1 changed file with 13 additions and 13 deletions.
diff --git a/hw/ip/mbx/dv/env/seq_lib/mbx_base_vseq.sv b/hw/ip/mbx/dv/env/seq_lib/mbx_base_vseq.sv
@@ -136,7 +136,7 @@ class mbx_base_vseq extends cip_base_vseq #(
   endtask: start_device_seq
 
   virtual task set_mem_range_regwen(mubi4_t regwen);
-    `uvm_info(`gfn, $sformatf("Setting memory range regwen to 0x%x", regwen), UVM_LOW)
+    `uvm_info(`gfn, $sformatf("Setting memory range regwen to 0x%x", regwen), UVM_MEDIUM)
 
     ral.address_range_regwen.regwen.set(int'(regwen));
     csr_update(ral.address_range_regwen);
@@ -201,7 +201,7 @@ class mbx_base_vseq extends cip_base_vseq #(
   endtask: mbx_init
 
   virtual task mbx_abort();
-    `uvm_info(`gfn, "ABORTing operation", UVM_LOW)
+    `uvm_info(`gfn, "ABORTing operation", UVM_HIGH)
     m_mbx_soc_ral.soc_control.go.set(1'b0);
     m_mbx_soc_ral.soc_control.abort.set(1'b1);
     csr_update(m_mbx_soc_ral.soc_control);
@@ -403,17 +403,17 @@ class mbx_base_vseq extends cip_base_vseq #(
         rsp_size = mbx_config.response_dwords;
 
         `uvm_info(`gfn, $sformatf("Request size %x DWORD(s), Response size %x DWORD(s)",
-                                  req_size, rsp_size), UVM_LOW)
+                                  req_size, rsp_size), UVM_MEDIUM)
         `uvm_info(`gfn,
                   $sformatf("Inbox should use address range [%x,%x)",
                             mbx_config.ibmbx_base_addr, mbx_config.ibmbx_base_addr + req_size * 4),
-                  UVM_LOW)
+                  UVM_MEDIUM)
         `uvm_info(`gfn,
                   $sformatf("Outbox should use address range [%x,%x)",
                             mbx_config.obmbx_base_addr, mbx_config.obmbx_base_addr + rsp_size * 4),
-                  UVM_LOW)
+                  UVM_MEDIUM)
 
-        `uvm_info(`gfn, $sformatf("Constructing Request of 0x%0x DWORDs", req_size), UVM_LOW)
+        `uvm_info(`gfn, $sformatf("Constructing Request of 0x%0x DWORDs", req_size), UVM_MEDIUM)
         for(int unsigned ii = 0; ii < req_size; ii++) begin
           stressors(aborted, errored, panicked);
 
@@ -430,7 +430,7 @@ class mbx_base_vseq extends cip_base_vseq #(
             break;
           end else begin
             wr_data = $urandom();
-            `uvm_info(`gfn, $sformatf(" - Offset 0x%0x : 0x%0x", ii, wr_data), UVM_LOW)
+            `uvm_info(`gfn, $sformatf(" - Offset 0x%0x : 0x%0x", ii, wr_data), UVM_HIGH)
             req.push_back(wr_data);
             tl_access(.addr(m_mbx_soc_ral.get_addr_from_offset(mbx_reg_pkg::MBX_WDATA_OFFSET)),
                       .write(1'b1), .data(wr_data), .mask(4'hF), .blocking(1'b1),
@@ -480,16 +480,16 @@ class mbx_base_vseq extends cip_base_vseq #(
                                    ii, qd, ii, req[ii]))
             end
           end
-          `uvm_info(`gfn, "Request data matched expectations", UVM_LOW)
+          `uvm_info(`gfn, "Request data matched expectations", UVM_MEDIUM)
         end
 
         if (send_response) begin
           // Data from ROT to R-code
           q.delete();
-          `uvm_info(`gfn, $sformatf("Constructing Response of 0x%0x DWORDs", rsp_size), UVM_LOW)
+          `uvm_info(`gfn, $sformatf("Constructing Response of 0x%0x DWORDs", rsp_size), UVM_MEDIUM)
           for(int unsigned ii = 0 ; ii < rsp_size; ii++) begin
             mbx_dword_t data = $urandom;
-            `uvm_info(`gfn, $sformatf(" - Offset 0x%0x : 0x%0x", ii, data), UVM_LOW)
+            `uvm_info(`gfn, $sformatf(" - Offset 0x%0x : 0x%0x", ii, data), UVM_HIGH)
              // TODO: replace this byte queue with DWORDs
             q.push_back(data[7:0]);
             q.push_back(data[15:8]);
@@ -538,7 +538,7 @@ class mbx_base_vseq extends cip_base_vseq #(
                             .blocking(1'b1),
                             .tl_sequencer_h(p_sequencer.tl_sequencer_hs[cfg.mbx_soc_ral_name]));
 
-                  `uvm_info(`gfn, $sformatf("Mailbox read data is : 'h%0h", rd_data), UVM_LOW)
+                  `uvm_info(`gfn, $sformatf("Mailbox read data is : 'h%0h", rd_data), UVM_HIGH)
 
                   rsp.push_back(rd_data);
 
@@ -590,7 +590,7 @@ class mbx_base_vseq extends cip_base_vseq #(
         if (obs_error) begin
           `DV_CHECK_EQ(errored, 1'b1, "Unsignaled ERROR occurred")
 
-          `uvm_info(`gfn, "Clearing ERROR condition from SoC side using ABORT mechanism", UVM_LOW)
+          `uvm_info(`gfn, "Clearing ERROR condition from SoC side using ABORT mechanism", UVM_HIGH)
           mbx_abort();
           aborted = 1'b1;
 
@@ -605,7 +605,7 @@ class mbx_base_vseq extends cip_base_vseq #(
           `DV_CHECK_EQ(aborted, 1'b1, "BUSY asserted but not ABORTed")
 
           // Abort occurred, clear it from the OT FW side
-          `uvm_info(`gfn, "Clearing ABORT condition from OT FW side", UVM_LOW)
+          `uvm_info(`gfn, "Clearing ABORT condition from OT FW side", UVM_HIGH)
           ral.control.abort.set(1'b1);
           ral.control.error.set(1'b0);  // Don't raise another ERROR!
           csr_update(ral.control);