[bsp/at32] update for perfection of drv_usart_v2 (RT-Thread#7210)

liu-ziqin · Apr 13, 2023 · f86715c · f86715c
1 parent 8e8fcef
commit f86715c
Show file tree

Hide file tree

Showing 12 changed files with 1,441 additions and 326 deletions.
diff --git a/bsp/at32/at32f403a-start/board/Kconfig b/bsp/at32/at32f403a-start/board/Kconfig
@@ -55,32 +55,86 @@ menu "On-chip Peripheral Drivers"
         default y
         select RT_USING_SERIAL
         if BSP_USING_UART
-            config BSP_USING_UART1
+            menuconfig BSP_USING_UART1
                 bool "Enable UART1"
                 default y
+                if BSP_USING_UART1
+                    config BSP_UART1_RX_USING_DMA
+                        bool "Enable UART1 RX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART1_TX_USING_DMA
+                        bool "Enable UART1 TX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART1_RX_BUFSIZE
+                        int "Set UART1 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART1_TX_BUFSIZE
+                        int "Set UART1 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
 
-            config BSP_UART1_RX_USING_DMA
-                bool "Enable UART1 RX DMA"
-                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
-                default n
-
-            config BSP_USING_UART2
+            menuconfig BSP_USING_UART2
                 bool "Enable UART2"
-                default n
-
-            config BSP_UART2_RX_USING_DMA
-                bool "Enable UART2 RX DMA"
-                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
-                default n
+                default y
+                if BSP_USING_UART2
+                    config BSP_UART2_RX_USING_DMA
+                        bool "Enable UART2 RX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART2_TX_USING_DMA
+                        bool "Enable UART2 TX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART2_RX_BUFSIZE
+                        int "Set UART2 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART2_TX_BUFSIZE
+                        int "Set UART2 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
 
-            config BSP_USING_UART3
+            menuconfig BSP_USING_UART3
                 bool "Enable UART3"
-                default n
-
-            config BSP_UART3_RX_USING_DMA
-                bool "Enable UART3 RX DMA"
-                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
-                default n
+                default y
+                if BSP_USING_UART3
+                    config BSP_UART3_RX_USING_DMA
+                        bool "Enable UART3 RX DMA"
+                        depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART3_TX_USING_DMA
+                        bool "Enable UART3 TX DMA"
+                        depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART3_RX_BUFSIZE
+                        int "Set UART3 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART3_TX_BUFSIZE
+                        int "Set UART3 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
         endif
 
     menuconfig BSP_USING_PWM

diff --git a/bsp/at32/at32f407-start/board/Kconfig b/bsp/at32/at32f407-start/board/Kconfig
@@ -72,32 +72,86 @@ menu "On-chip Peripheral Drivers"
         default y
         select RT_USING_SERIAL
         if BSP_USING_UART
-            config BSP_USING_UART1
+            menuconfig BSP_USING_UART1
                 bool "Enable UART1"
                 default y
+                if BSP_USING_UART1
+                    config BSP_UART1_RX_USING_DMA
+                        bool "Enable UART1 RX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART1_TX_USING_DMA
+                        bool "Enable UART1 TX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART1_RX_BUFSIZE
+                        int "Set UART1 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART1_TX_BUFSIZE
+                        int "Set UART1 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
 
-            config BSP_UART1_RX_USING_DMA
-                bool "Enable UART1 RX DMA"
-                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
-                default n
-
-            config BSP_USING_UART2
+            menuconfig BSP_USING_UART2
                 bool "Enable UART2"
-                default n
-
-            config BSP_UART2_RX_USING_DMA
-                bool "Enable UART2 RX DMA"
-                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
-                default n
+                default y
+                if BSP_USING_UART2
+                    config BSP_UART2_RX_USING_DMA
+                        bool "Enable UART2 RX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART2_TX_USING_DMA
+                        bool "Enable UART2 TX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART2_RX_BUFSIZE
+                        int "Set UART2 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART2_TX_BUFSIZE
+                        int "Set UART2 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
 
-            config BSP_USING_UART3
+            menuconfig BSP_USING_UART3
                 bool "Enable UART3"
-                default n
-
-            config BSP_UART3_RX_USING_DMA
-                bool "Enable UART3 RX DMA"
-                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
-                default n
+                default y
+                if BSP_USING_UART3
+                    config BSP_UART3_RX_USING_DMA
+                        bool "Enable UART3 RX DMA"
+                        depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART3_TX_USING_DMA
+                        bool "Enable UART3 TX DMA"
+                        depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART3_RX_BUFSIZE
+                        int "Set UART3 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART3_TX_BUFSIZE
+                        int "Set UART3 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
         endif
 
     menuconfig BSP_USING_PWM

diff --git a/bsp/at32/at32f413-start/board/Kconfig b/bsp/at32/at32f413-start/board/Kconfig
@@ -55,32 +55,86 @@ menu "On-chip Peripheral Drivers"
         default y
         select RT_USING_SERIAL
         if BSP_USING_UART
-            config BSP_USING_UART1
+            menuconfig BSP_USING_UART1
                 bool "Enable UART1"
                 default y
+                if BSP_USING_UART1
+                    config BSP_UART1_RX_USING_DMA
+                        bool "Enable UART1 RX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART1_TX_USING_DMA
+                        bool "Enable UART1 TX DMA"
+                        depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART1_RX_BUFSIZE
+                        int "Set UART1 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART1_TX_BUFSIZE
+                        int "Set UART1 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
 
-            config BSP_UART1_RX_USING_DMA
-                bool "Enable UART1 RX DMA"
-                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
-                default n
-
-            config BSP_USING_UART2
+            menuconfig BSP_USING_UART2
                 bool "Enable UART2"
-                default n
-
-            config BSP_UART2_RX_USING_DMA
-                bool "Enable UART2 RX DMA"
-                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
-                default n
+                default y
+                if BSP_USING_UART2
+                    config BSP_UART2_RX_USING_DMA
+                        bool "Enable UART2 RX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART2_TX_USING_DMA
+                        bool "Enable UART2 TX DMA"
+                        depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART2_RX_BUFSIZE
+                        int "Set UART2 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART2_TX_BUFSIZE
+                        int "Set UART2 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
 
-            config BSP_USING_UART3
+            menuconfig BSP_USING_UART3
                 bool "Enable UART3"
-                default n
-
-            config BSP_UART3_RX_USING_DMA
-                bool "Enable UART3 RX DMA"
-                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
-                default n
+                default y
+                if BSP_USING_UART3
+                    config BSP_UART3_RX_USING_DMA
+                        bool "Enable UART3 RX DMA"
+                        depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART3_TX_USING_DMA
+                        bool "Enable UART3 TX DMA"
+                        depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                        default n
+
+                    config BSP_UART3_RX_BUFSIZE
+                        int "Set UART3 RX buffer size"
+                        range 64 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 256
+
+                    config BSP_UART3_TX_BUFSIZE
+                        int "Set UART3 TX buffer size"
+                        range 0 65535
+                        depends on RT_USING_SERIAL_V2
+                        default 0
+                endif
         endif
 
     menuconfig BSP_USING_PWM