##radioemitter

Radio emitter is used to controll radio plugs.

This module is for gladys v3

It use the module gladys-serial to send a radio code to the arduino that's connected to the Raspberry Pi.

How to use

You can find the code for the arduino in the file arduino_code.ino.

The module only implement the exec function. It's automaticaly call by gladys when you put on/off the device.

The identifier is the off code for disable the plug. For exemple : 16129807

The on code is calculated, it's the off code +1 (the state value when you put on the device).

How to add a device on gladys and use it

Actualy, to create a device, you must create it in the database.

Create a device in the 'device' table with 'radioemitter' for service culumn value. For exemple :

name	protocol	service	identifier	room	id	createdAt	updatedAt
Petite lumière salon	radio	radioemitter	16129806	2	5

Create the devicetype correspondance with 'binary' (for binary device, min is 0 and max is 1) for the 'type' and the code af your radio device for the 'identifier'.

For exemple :

type	tag	sensor	unit	min	max	display	device	id	createdAt	updatedAt	name	identifier
binary	lumiere_salon	0	0	1	1	5	4	lumiere_salon	16129806

After that, go on Dladys, to the devices page and you can controle your device.