Skip to content

Heavy-Hitter detection in P4 switch ASIC using Inter-Packet Gap

License

Notifications You must be signed in to change notification settings

intrig-unicamp/P4-HH

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

91 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Heavy-Hitter Detection using Inter Packet Gap (IPG)

In this project, we take a completely different approach to detect Heavy-Hitter flows, keep track of per-flow Inter Packet Gap (IPG) metrics instead of packet counts. HH flows can be characterized by small IPG metrics calculated as a function (e.g., weighted average) of the inter-packet time intervals. The related publication of this work can be found here: HH-IPG(IEEE TNSM) .

Implementation in TNA P4-16 using bf-sde-9.3.1

Our proposed IPG based HH detection can fit most of the existing packet count-based data structures to detect HH. For HH implementation on Tofino switch ASIC, we leverage the HeavyKeeper(HK) algorithm. You can find HK paper here, which is amenable to programmable HW. However, the proposed approach can also be applied for other similar existing algorithms such as Elastic Sketch. The complete TNA P4-16 code can be found in the "P4-IPG-HH" folder. The code is successfully compiled on the Tofino Wedge100BF-32X switch using bf-sde-9.3.1. This version has been successfully tested to detect heavy-hitter flows with CAIDA16, MAWI20 and IMC10 real traces using TReX, and OSNT Realistic Traffic Generator.

Also, we performed the experiments using the Tofino switch for 60 Secs, measuring time-interval by considering 1 Sec window-size for HH detection using CAIDA traces. To analyze the accuracy, we use the standard sliding-window approach HH-IPG-Simulator/slidingWindowHH.py to get the true HHs and compared them with our IPG based approach. As a result, we get more than 90% accuracy.

There are some pre-defined parameters, which we need to set before the HH evaluation. The current parameter settings can be found in P4-IPG-HH/include/constants.p4.

const bit<16>  IPG_INIT  = 1600;  // for 5 Mbps HH threhsold
const bit<16>  CONST     = 20;    // contant rate linear increase of weighted IPG 
const bit<16>  TAU_TH    = 300;   // tau threshold to decide HHs 
const bit<16>  WRAPTIME  = 4096;  // in microseconds

We consider the IPG_INIT value the same as the HH threshold. To convert the HH threhsold in-terms of IPG, we can use the simple calculation HH_IPG_TH = (DEFAULT_PKT_SIZE * 8)/HH threshold), here the default packet size is 1000 Bytes. More details about the calculation can be found in HH-IPG-Simulator/IPG_HeavyKeeper.py.

To push the required entries for updating the Tau metric within the switch, we can consider the P4Runtime shell. If you use the docker image for the P4Runtime shell, you can use the P4-IPG-HH/p4rt/start_p4runtime.sh script for pushing the entries to the switch.

docker run -it --rm --entrypoint "" \
     -v P4-IPG-HH:/workspace \
     -w /workspace p4lang/p4runtime-sh:latest bash \
     -c "source /p4runtime-sh/venv/bin/activate; \
     export PYTHONPATH=/p4runtime-sh:/p4runtime-sh/py_out; \
     python3 -c 'import p4runtime_sh.shell as sh'; \
     python3 p4rt/p4rt.py" \

For file P4-IPG-HH/p4rt/p4rt.py, we require pipeline_config.pb.bin, which we can generate using P4-IPG-HH/genPipeConf.sh. In this file, first, we compile the P4 code as follows:

docker run --rm -v "${output_dir}:${output_dir}" -w "${output_dir}" BFSDE_P4C_COMPILER_IMG \
     bf-p4c --arch tna -g --create-graphs \
     --verbose 2 -o output_dir --p4runtime-files output_dir/p4info.txt \
     --p4runtime-force-std-externs IPG-HH.p4 \
     $@

The above command gets all the compiler outputs to the folder name output_dir. Then we can use the IPG-HH.conf to generate pipeline_config.pb.bin.

docker run --rm -v "${output_dir}/output_dir:${output_dir}/output_dir" -w "${output_dir}/output_dir" \
     ${PIPELINE_CONFIG_BUILDER_IMG} \
     -p4c_conf_file=./IPG-HH.conf \
     -bf_pipeline_config_binary_file=./pipeline_config.pb.bin

More detail can be found in Stratum and P4Runtime-shell.

How to test IPG based HH detection using Simulator

To test our algorithm on the simulator, we develop a python-based simulator to run our HH algorithm using real traces. The steps are as follows.

  1. Clone the repository

git clone https://github.com/intrig-unicamp/P4-HH.git

  1. Then, go to the folder HH-IPG-Simulator
cd HH-IPG-Simulator
  1. There are some parameters, which we need to set before performing the tests.
pythonw results.py --help
usage: results.py [-h] [--flow_definition FLOW_DEFINITION]
                  [--windowsize WINDOWSIZE] [--hh_threhsold HH_THREHSOLD]
                  [--weighting_decrease WEIGHTING_DECREASE]

optional arguments:
  -h, --help            show this help message and exit
  --flow_definition FLOW_DEFINITION
                        choose 1 for 5 Tuple, 2 for IP source, 3 for IP
                        destination, 4 for IP source and destination.
                        (default: 1)
  --windowsize WINDOWSIZE
                        size of time window in sec to measure the Heavy-Hitter
                        flows (default: 1)
  --hh_threhsold HH_THREHSOLD
                        define Heavy-Hitter threshold in Mbps (default: 5)
  --weighting_decrease WEIGHTING_DECREASE
                        degree of weighting decrease in percentage for EWMA
                        calculation (default: 98)

We can set the flow definition for HH detection. E.g., if we choose 1, the algorithm will set the flow Id based on 5-tuple. By default, the algorithm set 1 for flow definition. Another parameter is window size—window size indicates the measuring time interval in seconds. By default, the window size is set as 1 Sec.

Also, for the HH threshold, we can set this in Mbps, and by default, the setting is 5 Mbps. We use Exponential Weighting Moving Average (EWMA) of IPG values of a flow, the degree of weighting decrease can be set, which impact on overall accuracy. The default value is 98. The best accuracy can be analyzed by setting weighting decrease as 98 or 99. However, for lower HH threshold, such as 1 Mbps or below, we need to consider weighting decrease around between 90-95.

Example:

pythonw results.py --hh_threhsold 10 --weighting_decrease 99 --windowsize 1

Example Outputs:
Total flows : 3931
Number of true HH : 84
False positives for HK-IPG: 3
False negatives for HK-IPG: 7
Precision: 0.962500
Recall: 0.916667
f1score: 0.939024
False positive rate: 0.000780
False negative rate: 0.083333
  1. For some quick evaluation tests, we downloaded some WIDE backbone traces from MAWI20. You can find the CSV files as follows:

cd HH-IPG-Simulator/OUTPUT_DATASET/1_SEC_MAWI_CSV/

  1. To generate the new CSV files from PCAP traces, we can use the file dataset.sh by passing three arguments:
   DURATION : provide integer value to denote the time-window size in sec
   INFILE   : locate the path of main PCAP file
   OUTFILE  : mention the output pcap name

Example:

./dataset.sh 1 locate/pcap/file file_name.pcap

Tests

As mentioned above for performing accuracy test to get F1 Score, Recall and Precision. There are two other tests, which we can performed using the file results.py.

  1. The first test can be performed to analyze the correlation between weighted IPG or Tau metric and Flow Size. The following function can be called:
def graphCorrFeatures(ax=None):

    CorrDataset(ISP_file, str(args.flow_definition), memorySlots, str(args.windowsize), str(args.hh_threhsold))
    data = pd.read_csv("CorrDataset.csv")
    fig,ax=plt.subplots(figsize=(10,8))
    #corr = data.corr(method='pearson')
    corr = data.corr(method='spearman')
    cmap = sns.diverging_palette(20, 220, n=200)

    ans=sns.heatmap(corr, vmin=-1, vmax=1, linewidths=2, cmap=cmap, center=0, square=False, \
    annot=True,annot_kws={"fontsize":18}, xticklabels=False, yticklabels=False, cbar=False, ax=ax)
    print corr
    plt.show()

The file corr_dataset.py for analyzing the correlation.

  1. The second test is used to anaylze the missed HHs (or hidden heavy hitters) due to the disjoint time window. We can call the function resultMissedHHFlows using results.py to perform the test.

About

Heavy-Hitter detection in P4 switch ASIC using Inter-Packet Gap

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published