Kopycat is a multi-processor architectures system and user-level (with VEOS module) emulator.
Main features are:
- Easy to assemble a new device. Configure your own platform using JSON or Kotlin.
- Easy to customise. Create your own platform-module using Kotlin.
- Cross-platform. Kopycat uses JVM as a backend and can be run on Windows, Linux and OSX.
- One-to-one correspondence. Virtual platform representation is identical to block diagram.
- Multiple supported architectures: MIPS, ARM, MSP430, v850ES, x86.
- User-level mode. Can emulate a standalone ELF-file without full system emulation.
This project contains CPU cores: ARMv6, ARMv6M, ARMv7, MIPS, MSP430, v850ES, x86, and MCUs: CortexM0, STM32F0xx, MSP430x44x.
You can download prebuild JAR-files modules via the link: https://kopycat.ru/download
- How to install and run Linux Buildroot guest on Debian 9 host
- How to use snapshot for quick start of guest system
- Developing firmware for STM32 in CLion using Kopycat
- Run from IntelliJ Linux Buildroot guest and make rm -rf /
To run Kopycat you have to install the following software:
- OpenJDK (version 11.0.6/7 tested)
- If Python REPL console is preferred instead of Kotlin console then Python required (version 2.7 and 3.6, 3.8 tested) with Jep package (version 0.3.9 tested) for embedded console in Kopycat.
NOTE: prebuild OpenJDK installer is available on https://adoptopenjdk.net/
Linux and OSX users can use package manager to install OpenJDK and Python. To install jep pip command can be used, but before compiler and toolchain have to be installed for building jep package. On Linux system gcc from apt and on OSX Developer Tools with XCode (XCode by itself is not needed, but we need a compiler). As for Windows users you may face a lot of difficulties while compiling Python packages.
-
For Windows, you should manually download OpenJDK package and setup
PATHandJAVA_HOMEenvironment variables, see https://openjdk.java.net/install/ -
Download and install Python (don't forget to add Python to
PATHduring installation and select to install pip) from the official site: https://www.python.org/downloads/ -
Download and install Visual Studio build tools: https://visualstudio.microsoft.com/visual-cpp-build-tools/ (DON'T FORGET TO SELECT VERSION 14.x)
-
Fix ¯\_(ツ)_/¯ Python setuptools to work with Visual Studio compiler: https://stackoverflow.com/a/20050195/1312718
-
Run Console from x64 Native Tools Command Prompt (installed in the main menu of Windows) and execute:
pip install jep
# only for debian 9
echo 'deb http://ftp.debian.org/debian stretch-backports main' | sudo tee /etc/apt/sources.list.d/stretch-backports.list
sudo apt update
sudo apt install gcc openjdk-11-jdk curl python socat
# path may differ. JAVA_HOME required to be set for jep installation
export JAVA_HOME=/usr/lib/jvm/java-11-openjdk-amd64
curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
sudo python get-pip.py
pip install jepNOTE: OpenJDK installation reference for Ubuntu https://dzone.com/articles/installing-openjdk-11-on-ubuntu-1804-for-real
brew install socat
brew cask install adoptopenjdk
brew install adoptopenjdk/openjdk/adoptopenjdk-openjdk11
brew install [email protected]
pip install jepNOTE: OpenJDK installation reference https://dzone.com/articles/install-openjdk-versions-on-the-mac
For module development and working with sources the following software is required:
- IntelliJ (version >= 2020.2)
- Kotlin plugin (version >= 1.4.21)
In this part of readme you will see how to start Kopycat:
- for a device with STM32F042 (core: Cortex-M0; architecture: ARMv6M)
- virtual ARM device (core: ARM1176JZS; architecture: ARMv6/v7)
lsandcatcommand for ARM architecture in user-level mode with VEOS
The peripheral modules implemented for STM32F042 are UART, TIMx, DMAC, GPIOx, WDG. These peripheral modules are enough to run FreeRTOS. How to work with FreeRTOS is shown in the freertos_uart firmware example.
Virtual ARM (VirtARM) runs UBoot, Linux with kernel 2.6.x, and ext2 filesystem.
ARM architecture is used in all the examples as the most popular in embedded devices nowadays.
NOTE: The concept of architecture and core may differ from manufacturer to manufacturer. For example, ARM has a complicated system of architecture and core. The low-level layer is architecture, i.e. ARMv6, ARMv7 (CPUs), ARMv6M (embedded MCUs), etc. Mentioned architecture are used in cores, i.e. ARM1176JZS (not ARMv11!), CortexM0, CortexM3, etc. And then MCUs are implemented, i.e. STM32F04. For TI MSP430 core, architecture and MCU itself are almost the same. So we will often use "core" to refer to core or architecture. Moreover, there is no architecture in sources of an entity. Kopycat lowest-level is Core that consists of CPU, actual CPU, which executes instructions, Decoder, COP, coprocessor, which process interrupts, MMU, memory management unit.
-
Download prebuild emulator core
kopycat-X.Y.ABfrom latest release and unzip the archive into any directory (it is strongly recommended not to use directories with spaces or special symbols!) -
Add environment variable
KOPYCAT_HOME(recommended, used by Kopycat core to lookup default modules library) to this directory, e.g.KOPYCAT_HOME=/opt/kopycat-X.Y.Z-RCxand add to environment variablePATHpath toKOPYCAT_HOME/bin -
Download prebuild modules libraries for Kopycat
modules-X.Y.ABfrom latest release and:- unzip this archive into any directory (it is also strongly recommended not to use directories with spaces or special symbols!) and add environment variable
KOPYCAT_MODULES_LIB_PATH(only to simplify readme commands) to the directory
OR
- unzip this archive into
${KOPYCAT_HOME}/modulesdirectory (if you setupKOPYCAT_HOME)
- unzip this archive into any directory (it is also strongly recommended not to use directories with spaces or special symbols!) and add environment variable
-
Start emulation of one of the modules from the library, e.g. STM32F042
kopycat -y ${KOPYCAT_MODULES_LIB_PATH} -l mcu -n stm32f042_example -g 23946 -p "firmware=example:usart_poll,tty1=socat:,tty2=socat:"
OR if you set up
KOPYCAT_HOMEenvironment variable and copy modules into${KOPYCAT_HOME}/modulesjust:kopycat -l mcu -n stm32f042_example -g 23946 -p "firmware=example:usart_poll,tty1=socat:,tty2=socat:"-y- path to a bunch of prebuild module's libraries (aka registry)-l- actual library for the module (name of directory in the registry)-n- name of module, in our case isstm32f042_example- name of Kotlin class inside jar-p- parameters forstm32f042_examplemodule (class arguments). To get more information about arguments of module you should see sources of module (for this module available in repository on GitHub).firmware- is firmware to load into FLASH of STM32F042 (in this case simple tty echo)- example - means usage of one of binaries from
stm32f0xx.jar:benchmark_qsort,freertos_uart,gpiox_led,gpiox_registers,rhino_fw42k6,usart_dma,usart_poll. Sources for each firmware published in GitHub repository in thekopycat-modules/mcu/stm32f0xx/firmwares. - file - path to binary file i.e. *.bin from CLion.
- bytes - hex string i.e.
AACCDDEE90909090.
- example - means usage of one of binaries from
ttyX- virtual terminal connected to usart1 and usart2 of STM32F042.
-g- GDB server port
NOTES:
- If you've added
KOPYCAT_HOMEenvironment variable you can put prebuild modules libraries into${KOPYCAT_HOME}/moduleswithout necessity to specify-yparameter explicitly. - Due to socat this line will work only in nix system with installed socat. To disable it use
tty1=null,tty2=null. For windows system com0com can be used or any other software to create virtual COM ports. In this case you should specify directly virtual com-port nametty1=COM1,tty2=COM2.
-
You should see the following start log:
- for python console:
bat@Kernel ~ % kopycat -l mcu -n stm32f042_example -g 23946 -p "firmware=example:usart_poll,tty1=socat:,tty2=socat:" 12:53:54 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:54): Build version: kopycat-0.3.30-e87ed235-2021.112-Regular [JRE v11.0.6] 12:53:54 INF ...atStarter.getRegistryPath(KopycatStarter.kt:34): Kopycat directory: '...' 12:53:55 INF ...kopycat.Kopycat.setSnapshotsDir(Kopycat.kt:103): Change snapshots directory to '/Users/bat' 12:53:55 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:78): GDB_SERVER(port=23946,alive=true) was created 12:53:55 INF ...ibrary.instantiate(ModuleFactoryLibrary.kt:105): stm32f042_example(null, top, firmware=example:usart_poll, tty1=socat:, tty2=socat:) 12:53:55 INF ...iliary.ANetworkThread.run(ANetworkThread.kt:55): GDB_SERVER waited for clients on [172.20.10.6:23946] 12:53:56 WRN ...cat$Companion.createPseudoTerminal(Socat.kt:75): Pseudo-terminals created for top.term1: /dev/ttys014 and /dev/ttys015 12:53:56 WRN ...cat$Companion.createPseudoTerminal(Socat.kt:75): Pseudo-terminals created for top.term2: /dev/ttys016 and /dev/ttys017 12:53:56 CFG ....initializeAndResetAsTopInstance(Module.kt:189): Setup core to top.stm32f042.cortexm0.arm for top 12:53:56 CFG ....initializeAndResetAsTopInstance(Module.kt:194): Setup debugger to top.stm32f042.dbg for top 12:53:56 WRN ....initializeAndResetAsTopInstance(Module.kt:210): Tracer wasn't found in top... 12:53:56 CFG ...s.UartTerminal$tx$2.invoke(UartTerminal.kt:176): Create transmitter UART terminal thread: 'top.term2' 12:53:56 CFG ...s.UartTerminal$tx$2.invoke(UartTerminal.kt:176): Create transmitter UART terminal thread: 'top.term1' 12:53:56 CFG ....initializeAndResetAsTopInstance(Module.kt:218): Initializing ports and buses... 12:53:56 WRN ....initializeAndResetAsTopInstance(Module.kt:220): ATTENTION: Some ports has warning use printModulesPortsWarnings to see it... 12:53:56 INF ...modules.cortexm0.CORTEXM0.reset(CORTEXM0.kt:58): Setup CORTEX-M0 core PC=0x080022C1 MSP=0x20001800 12:53:56 CFG ....initializeAndResetAsTopInstance(Module.kt:232): Module top is successfully initialized and reset as a top cell! 12:53:56 INF ...ion.lab403.kopycat.Kopycat.open(Kopycat.kt:151): Board top[stm32f042_example] with arm[ARMv6MCore] is ready 12:53:56 INF ...bstub.GDBServer.debuggerModule(GDBServer.kt:78): Set new debugger module top.stm32f042.dbg for GDB_SERVER(port=23946,alive=true) 12:53:56 WRN ...at.KopycatStarter.console(KopycatStarter.kt:44): Use -kts option to enable Kotlin console. In the next version Kotlin console will be default. 12:53:56 CFG ...at.consoles.jep.JepLoader.load(JepLoader.kt:53): Loading Jep using Python command 'python3' to overwrite use '--python' option 12:53:56 CFG ...oles.jep.PythonShell.version(PythonShell.kt:34): Python Version(major=3, minor=9, micro=0) 12:53:56 CFG ...s.jep.JepLoader.findFileInPath(JepLoader.kt:25): Jep jar file: /usr/local/lib/python3.9/site-packages/jep/jep-3.9.1.jar 12:53:56 CFG ...s.jep.JepLoader.findFileInPath(JepLoader.kt:25): Jep shared library file: /usr/local/lib/python3.9/site-packages/jep/jep.cpython-39-darwin.so Jep starting successfully! 12:53:56 INF ...ycat.KopycatStarter.main(KopycatStarter.kt:112): Python console enabled Python >- for kotlin console:
bat@Kernel ~ % kopycat -l mcu -n stm32f042_example -g 23946 -p "firmware=example:usart_poll,tty1=socat:,tty2=socat:" -kts 12:55:07 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:54): Build version: kopycat-0.3.30-e87ed235-2021.112-Regular [JRE v11.0.6] 12:55:08 INF ...atStarter.getRegistryPath(KopycatStarter.kt:34): Kopycat directory: '<KOPYCAT_HOME>' 12:55:09 INF ...kopycat.Kopycat.setSnapshotsDir(Kopycat.kt:103): Change snapshots directory to '/Users/bat' 12:55:09 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:78): GDB_SERVER(port=23946,alive=true) was created 12:55:09 INF ...ibrary.instantiate(ModuleFactoryLibrary.kt:105): stm32f042_example(null, top, firmware=example:usart_poll, tty1=socat:, tty2=socat:) 12:55:09 INF ...iliary.ANetworkThread.run(ANetworkThread.kt:55): GDB_SERVER waited for clients on [172.20.10.6:23946] 12:55:09 WRN ...cat$Companion.createPseudoTerminal(Socat.kt:75): Pseudo-terminals created for top.term1: /dev/ttys018 and /dev/ttys019 12:55:10 WRN ...cat$Companion.createPseudoTerminal(Socat.kt:75): Pseudo-terminals created for top.term2: /dev/ttys020 and /dev/ttys021 12:55:10 CFG ....initializeAndResetAsTopInstance(Module.kt:189): Setup core to top.stm32f042.cortexm0.arm for top 12:55:10 CFG ....initializeAndResetAsTopInstance(Module.kt:194): Setup debugger to top.stm32f042.dbg for top 12:55:10 WRN ....initializeAndResetAsTopInstance(Module.kt:210): Tracer wasn't found in top... 12:55:10 CFG ...s.UartTerminal$tx$2.invoke(UartTerminal.kt:176): Create transmitter UART terminal thread: 'top.term2' 12:55:10 CFG ...s.UartTerminal$tx$2.invoke(UartTerminal.kt:176): Create transmitter UART terminal thread: 'top.term1' 12:55:10 CFG ....initializeAndResetAsTopInstance(Module.kt:218): Initializing ports and buses... 12:55:10 WRN ....initializeAndResetAsTopInstance(Module.kt:220): ATTENTION: Some ports has warning use printModulesPortsWarnings to see it... 12:55:10 INF ...modules.cortexm0.CORTEXM0.reset(CORTEXM0.kt:58): Setup CORTEX-M0 core PC=0x080022C1 MSP=0x20001800 12:55:10 CFG ....initializeAndResetAsTopInstance(Module.kt:232): Module top is successfully initialized and reset as a top cell! 12:55:10 INF ...ion.lab403.kopycat.Kopycat.open(Kopycat.kt:151): Board top[stm32f042_example] with arm[ARMv6MCore] is ready 12:55:10 INF ...bstub.GDBServer.debuggerModule(GDBServer.kt:78): Set new debugger module top.stm32f042.dbg for GDB_SERVER(port=23946,alive=true) warning: runtime JAR files in the classpath should have the same version. These files were found in the classpath: <KOPYCAT_HOME>/lib/kotlin-reflect-1.4.10.jar (version 1.4) <KOPYCAT_HOME>/lib/kotlin-stdlib-1.4.10.jar (version 1.4) <KOPYCAT_HOME>/lib/kotlin-stdlib-jdk8-1.3.71.jar (version 1.3) <KOPYCAT_HOME>/lib/kotlin-stdlib-jdk7-1.3.71.jar (version 1.3) <KOPYCAT_HOME>/lib/kotlin-script-runtime-1.4.10.jar (version 1.4) <KOPYCAT_HOME>/lib/kotlin-stdlib-common-1.4.10.jar (version 1.4) warning: some runtime JAR files in the classpath have an incompatible version. Consider removing them from the classpath 12:55:13 INF ...ycat.KopycatStarter.main(KopycatStarter.kt:112): Kotlin console enabled Kotlin >NOTES:
-
Pseudo-terminals created for top.term1: /dev/ttys002 and /dev/ttys004- /dev/ttys002 is endpoint to emulator connection to virtual COM port of USART1
- /dev/ttys004 is endpoint to user connection to virtual COM port of USART1
-
warning: runtime JAR files in the classpath should have the same versioncaused by Javalin library because it uses Kotlin 1.3.x that clashes with current Kopycat Kotlin version 1.4.10 but it not interferes. -
The next examples will be shown for Python console but almost all examples for Kotlin will be the same.
-
Currently, Kotlin console supports autocomplete feature, for Python it will be added in next releases.
-
Attach to
/dev/ttys004(name may differ) COM port using, for example, putty or screenscreen /dev/ttys004
-
In Kopycat console print and press enter:
kc.start() # run Kopycat emulation
-
Now you can print something in
/dev/ttys004and will see echo. This echo is sent back by the internal firmware of STM32F042. If emulation isn't running, there is no echo in the console. -
To stop emulation in Kopycat console print and press enter:
kc.halt()
kc - is a special proxy object to make visible all methods of Kopycat class from Java in Python interpreter using jep library. You can see all available methods of kc object in sources of Kopycat class.
-
Start emulation of another module: Linux 2.6.xx on ARM core
kopycat -y ${KOPYCAT_MODULES_LIB_PATH} -l mcu -n VirtARM -g 23946 -p "tty=socat:" 13:29:02 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:54): Build version: kopycat-0.3.30-e87ed235-2021.112-Regular [JRE v11.0.6] 13:29:02 INF ...atStarter.getRegistryPath(KopycatStarter.kt:34): Kopycat directory: '<KOPYCAT_HOME>' 13:29:03 INF ...kopycat.Kopycat.setSnapshotsDir(Kopycat.kt:103): Change snapshots directory to '/Users/bat' 13:29:03 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:78): GDB_SERVER(port=23946,alive=true) was created 13:29:03 INF ...ibrary.instantiate(ModuleFactoryLibrary.kt:105): VirtARM(null, top, tty=socat:) 13:29:03 INF ...iliary.ANetworkThread.run(ANetworkThread.kt:55): GDB_SERVER waited for clients on [172.20.10.6:23946] 13:29:04 WRN ...cat$Companion.createPseudoTerminal(Socat.kt:75): Pseudo-terminals created for top.term: /dev/ttys018 and /dev/ttys019 13:29:04 CFG ....modules.virtarm.VirtARM.<init>(VirtARM.kt:115): Setting bootloaderCmd: 'setenv machid 25f8 setenv bootargs console=ttyS0,115200n8 ignore_loglevel root=/dev/mtdblock0 init=/linuxrc lpj=622592 setenv verify n bootm 1000000 ' 13:29:04 CFG ....modules.virtarm.VirtARM.<init>(VirtARM.kt:120): Loading GCC map-file... 13:29:04 CFG ....initializeAndResetAsTopInstance(Module.kt:189): Setup core to top.arm1176jzs for top 13:29:04 CFG ....initializeAndResetAsTopInstance(Module.kt:194): Setup debugger to top.dbg for top 13:29:04 WRN ....initializeAndResetAsTopInstance(Module.kt:210): Tracer wasn't found in top... 13:29:04 CFG ...s.UartTerminal$tx$2.invoke(UartTerminal.kt:176): Create transmitter UART terminal thread: 'top.term' 13:29:04 CFG ....initializeAndResetAsTopInstance(Module.kt:218): Initializing ports and buses... 13:29:04 WRN ....initializeAndResetAsTopInstance(Module.kt:220): ATTENTION: Some ports has warning use printModulesPortsWarnings to see it... 13:29:04 FNE ...ware.processors.ARMv6CPU.reset(ARMv6CPU.kt:151): pc=0x00000000 sp=0x00000000 13:29:05 CFG ....initializeAndResetAsTopInstance(Module.kt:232): Module top is successfully initialized and reset as a top cell! 13:29:05 INF ...ion.lab403.kopycat.Kopycat.open(Kopycat.kt:151): Board top[VirtARM] with arm1176jzs[ARM1176JZS] is ready 13:29:05 INF ...bstub.GDBServer.debuggerModule(GDBServer.kt:78): Set new debugger module top.dbg for GDB_SERVER(port=23946,alive=true) 13:29:05 WRN ...at.KopycatStarter.console(KopycatStarter.kt:44): Use -kts option to enable Kotlin console. In the next version Kotlin console will be default. 13:29:05 CFG ...at.consoles.jep.JepLoader.load(JepLoader.kt:53): Loading Jep using Python command 'python3' to overwrite use '--python' option 13:29:05 CFG ...oles.jep.PythonShell.version(PythonShell.kt:34): Python Version(major=3, minor=9, micro=0) 13:29:05 CFG ...s.jep.JepLoader.findFileInPath(JepLoader.kt:25): Jep jar file: /usr/local/lib/python3.9/site-packages/jep/jep-3.9.1.jar 13:29:05 CFG ...s.jep.JepLoader.findFileInPath(JepLoader.kt:25): Jep shared library file: /usr/local/lib/python3.9/site-packages/jep/jep.cpython-39-darwin.so Jep starting successfully! 13:29:05 INF ...ycat.KopycatStarter.main(KopycatStarter.kt:112): Python console enabled
-
Attach to
/dev/ttys013(name may differ) COM port using for example putty or screenscreen /dev/ttys013
-
Run Kopycat emulation using
kc.start()command and see U-boot and Linux loading. After Linux load you can log in into it using root/toor pair in/dev/ttys013terminal.
-
To get info of all available modules in libraries, run Kopycat using the following command:
kopycat -y ${KOPYCAT_MODULES_LIB_PATH} -all 13:29:57 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:54): Build version: kopycat-0.3.30-e87ed235-2021.112-Regular [JRE v11.0.6] 13:29:57 INF ...atStarter.getRegistryPath(KopycatStarter.kt:34): Kopycat directory: '<KOPYCAT_HOME>' 13:29:58 INF ...kopycat.Kopycat.setSnapshotsDir(Kopycat.kt:103): Change snapshots directory to '/Users/bat' 13:29:58 INF ...opycat.printModulesRegistryInfo(Kopycat.kt:722): Library 'PeripheralFactoryLibrary[veos]': Module: [ VirtualMemory] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/veos/veos.jar] Module: [ MIPSApplication] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/veos/veos.jar] Module: [x86WindowsApplication] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/veos/veos.jar] Module: [ ARMApplication] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/veos/veos.jar] Library 'PeripheralFactoryLibrary[mcu]': Module: [ SCB] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/cortexm0.jar] Module: [ STK] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/cortexm0.jar] Module: [ CORTEXM0] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/cortexm0.jar] Module: [ NVIC] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/cortexm0.jar] Module: [ stm32f042_example] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ stm32f042_rhino] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ EXTI] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ STM32F042] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ LED] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ IWDG] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ GPIOx] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ FLASH] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ BT] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ DMAC] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ RCC] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ TIMx] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ SYSCFG] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ TSC] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ FMI] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ TIM18] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ USARTx] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ rhino] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ VirtARM] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/virtarm.jar] Module: [ Timer] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/virtarm.jar] Module: [ NANDCtrl] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/virtarm.jar] Module: [ NS16550] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/virtarm.jar] Module: [ PL190] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/virtarm.jar] Library 'PeripheralFactoryLibrary[cores]': Module: [ MipsDebugger] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/cores/mips.jar] Module: [ MipsCore] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/cores/mips.jar] Module: [ ARM1176JZS] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/cores/arm.jar] Module: [ ARMv6MCore] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/cores/arm.jar] Module: [ ARMv7Core] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/cores/arm.jar] Module: [ ARMDebugger] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/cores/arm.jar] Module: [ x86Debugger] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/cores/x86.jar] Module: [ x86Core] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/cores/x86.jar] Library 'PeripheralFactoryLibrary[common]': Module: [ ATACTRL] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/ATACTRL.class] Module: [ M95160] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/M95160.class] Module: [ NAND] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/NAND.class] Module: [ Hub] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/Hub.class] Module: [ i82551] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/i82551.class] Module: [ CompactFlash] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/CompactFlash.class] Module: [ Am79C972] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/Am79C972.class] Module: [ Signals] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/Signals.class] Module: [ SD] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/SD.class] Module: [ EEPROM] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/EEPROM.class] Module: [ PCIHost] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/common/pci/PCIHost.class] Library 'PeripheralFactoryLibrary[memory]': Module: [ ROM] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/memory/ROM.class] Module: [ VOID] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/memory/VOID.class] Module: [ SparseRAM] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/memory/SparseRAM.class] Module: [ RAM] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/memory/RAM.class] Library 'PeripheralFactoryLibrary[terminals]': Module: [ UartStreamTerminal] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/terminals/UartStreamTerminal.class] Module: [ UartTerminal] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/terminals/UartTerminal.class] Module: [ UartSerialTerminal] -> ClassModuleFactoryBuilder[<KOPYCAT_HOME>/lib/kopycat-0.3.30.jar/ru/inforion/lab403/kopycat/modules/terminals/UartSerialTerminal.class]
-
To get info of only modules in libraries, that can be used as a top module run Kopycat using the following command:
kopycat -top13:41:17 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:54): Build version: kopycat-0.3.30-e87ed235-2021.112-Regular [JRE v11.0.6] 13:41:18 INF ...atStarter.getRegistryPath(KopycatStarter.kt:34): Kopycat directory: '<KOPYCAT_HOME>' 13:41:19 INF ...kopycat.Kopycat.setSnapshotsDir(Kopycat.kt:103): Change snapshots directory to '/Users/bat' 13:41:19 INF ...opycat.printModulesRegistryInfo(Kopycat.kt:722): Library 'PeripheralFactoryLibrary[veos]': Module: [ MIPSApplication] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/veos/veos.jar] Module: [x86WindowsApplication] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/veos/veos.jar] Module: [ ARMApplication] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/veos/veos.jar] Library 'PeripheralFactoryLibrary[mcu]': Module: [ stm32f042_example] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ stm32f042_rhino] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ rhino] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/stm32f0xx.jar] Module: [ VirtARM] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/virtarm.jar] Module: [ Testbench] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/testbench.jar] Module: [ MSP430x44x] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/msp430x44x.jar] Module: [ P2020] -> JarModuleFactoryBuilder[<KOPYCAT_HOME>/modules/mcu/p2020.jar]
To get full help, run Kopycat using the following command kopycat --help:
13:43:06 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:54): Build version: kopycat-0.3.30-e87ed235-2021.112-Regular [JRE v11.0.6]
usage: kopycat [-h] [-u MODULES] [-y REGISTRY] [-n NAME] [-l LIBRARY] [-s SNAPSHOT] [-p PARAMETERS] [-w SNAPSHOTS_DIR] [-g GDB_PORT] [-r REST] [-gb] [-run] [-standalone] [-all] [-top]
[-ci] [-pw] [-python PYTHON] [-kts] [-ll LOG_LEVEL]
virtualization platform
named arguments:
-h, --help show this help message and exit
-u MODULES, --modules MODULES
Modules libraries paths in format: lib1:path/to/lib1,lib2:path/to/lib2
-y REGISTRY, --registry REGISTRY
Path to registry with libraries
-n NAME, --name NAME Top instance module name (with package path dot-separated)
-l LIBRARY, --library LIBRARY
Top instance module library name
-s SNAPSHOT, --snapshot SNAPSHOT
Snapshot file (top instance module/library can be obtained from here)
-p PARAMETERS, --parameters PARAMETERS
Parameters for top module constructor in format: arg1=100,arg2=/dev/io
-w SNAPSHOTS_DIR, --snapshots-dir SNAPSHOTS_DIR
Snapshots directory path (default path to store and load snapshots)
-g GDB_PORT, --gdb-port GDB_PORT
GDB server port (if not specified then not started)
-r REST, --rest REST REST server port. If null - Commander will work
-gb, --gdb-bin-proto GDB server enabled binary protocol (default: false)
-run, --run Run emulation as soon as Kopycat ready (default: false)
-standalone, --standalone
Run emulation as soon as Kopycat ready and exit when guest application stops (default: false)
-all, --modules-registry-all-info
Print all loaded modules info and exit (default: false)
-top, --modules-registry-top-info
Print top loaded modules info and exit (default: false)
-ci, --connections-info
Print hier. top module buses connections info at startup (default: false)
-pw, --ports-warnings Print all ports warnings when loading Kopycat module at startup (default: false)
-python PYTHON, --python PYTHON
Python interpreter command
-kts, --kotlin-script Set REPL to Kotlin script language (default: false)
-ll LOG_LEVEL, --log-level LOG_LEVEL
Set messages minimum logging level for specified loggers in format logger0=LEVEL,logger1=LEVEL
Or for all loggers if no '=' was found in value just logger level, i.e. FINE
Available levels: ALL, SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST, DEBUG, TRACE, OFF
-
KOPYCAT_HOMEenvironment variable is required andKOPYCAT_HOME/binis required to be added intoPATHenvironment variable -
VEOS module should be placed in modules directory into
KOPYCAT_HOME/modules -
Download other architecture ELF binary files to run using Kopycat, i.e. from Debian Stretch distributive:
-
Unpack it to some folders and change directory to where you unpack
-
Run the required binary using command for example:
kopycat-veos-arm bin/ls -la /usr/shareThe output of this command will be something like that:
... tons of log ... 13:07:24 CFG ...at.veos.api.impl.StatAPI.stat64(StatAPI.kt:140): [0x00009ACC] stat64(path='/usr/share/doc' buf=0x100004E8) -> stat(st_dev=0, st_ino=0, st_mode=16877, st_nlink=1, st_uid=0, st_gid=0, st_rdev=0, st_size=96, st_blksize=0, st_blocks=0, st_atime=1607940014, st_mtime=1487766225, st_ctime=1487766225) in Process:1(state=Running) total 0 drwxr-xr-x 1 root root 96 Feb 22 2017 doc drwxr-xr-x 1 root root 96 Feb 22 2017 info drwxr-xr-x 43 root root 1440 Feb 22 2017 locale drwxr-xr-x 2 root root 128 Feb 22 2017 man 13:07:24 FST ...ab403.kopycat.veos.VEOS.preExecute(VEOS.kt:402): Application exitedCommand
kopycat-veos-armis a script located in<KOPYCAT_HOME>/bindirectory. This script run Kopycat in a standalone mode. Standalone mode is not waiting until a debugger connected but rather run emulated processor as soon as it is ready. To configure Kopycat with VEOS module the next environment options may be used:KOPYCAT_VEOS_GDB_PORT- starts GDB server for specified port (default: not started).KOPYCAT_VEOS_CONSOLE- what type of console to be used, may be:kotlinorpython=<PYTHON_COMMAND>(default:python=python).KOPYCAT_VEOS_WORKING_DIR- working root directory for emulation i.e. directory in host system that will be/for emulating (default: is current a directory).KOPYCAT_VEOS_STANDALONE- ifNOdon't run emulated processor in Kopycat as soon as emulator ready (default: standalone mode)KOPYCAT_VEOS_LD_PRELOAD- comma-separated list of preload dynamic libraries if these libraries required for ELF-file and not resolved automatically (default: empty)KOPYCAT_VEOS_LOGGING_CONF- logging level for whole Kopycat or if specified module for the module, i.e.KOPYCAT_VEOS_LOGGING_CONF=OFFdisable all logging messages, orKOPYCAT_VEOS_LOGGING_CONF=TimeAPI=OFF,StdlibAPI=FINE- disable logging for TimeAPI and set minimum logging level for StdlibAPI to FINE.
For example with disabled logging:
export KOPYCAT_VEOS_LOGGING_CONF=OFF kopycat-veos-arm usr/bin/readelf -S /usr/bin/readelfOutput is:
13:52:05 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:54): Build version: kopycat-0.3.30-e87ed235-2021.115-Regular [JRE v11.0.6] 13:52:05 INF ...atStarter.getRegistryPath(KopycatStarter.kt:34): Kopycat directory: '<KOPYCAT_HOME>' There are 28 section headers, starting at offset 0x862fc: Section Headers: [Nr] Name Type Addr Off Size ES Flg Lk Inf Al [ 0] NULL 00000000 000000 000000 00 0 0 0 [ 1] .interp PROGBITS 00000000 000154 000013 00 A 0 0 1 [ 2] .note.ABI-tag NOTE 00000000 000168 000020 00 A 0 0 4 [ 3] .note.gnu.build-i NOTE 00000000 000188 000024 00 A 0 0 4 [ 4] .gnu.hash GNU_HASH 00000000 0001ac 00015c 04 A 5 0 4 [ 5] .dynsym DYNSYM 00000000 000308 000750 10 A 6 3 4 [ 6] .dynstr STRTAB 00000000 000a58 0004e4 00 A 0 0 1 [ 7] .gnu.version VERSYM 00000000 000f3c 0000ea 02 A 5 0 2 [ 8] .gnu.version_r VERNEED 00000000 001028 000020 00 A 6 1 4 [ 9] .rel.dyn REL 00000000 001048 001c28 08 A 5 0 4 [10] .rel.plt REL 00000000 002c70 000210 08 AI 5 23 4 [11] .init PROGBITS 00000000 002e80 000010 00 AX 0 0 4 [12] .plt PROGBITS 00000000 002e90 00032c 04 AX 0 0 4 [13] .text PROGBITS 00000000 0031c0 05d65c 00 AX 0 0 8 [14] .fini PROGBITS 00000000 06081c 00000c 00 AX 0 0 4 [15] .rodata PROGBITS 00000000 060828 023418 00 A 0 0 4 [16] .ARM.exidx ARM_EXIDX 00000000 083c40 000008 00 AL 13 0 4 [17] .eh_frame PROGBITS 00000000 083c48 000004 00 A 0 0 4 [18] .init_array INIT_ARRAY 00000000 0842f4 000004 04 WA 0 0 4 [19] .fini_array FINI_ARRAY 00000000 0842f8 000004 04 WA 0 0 4 [20] .jcr PROGBITS 00000000 0842fc 000004 00 WA 0 0 4 [21] .data.rel.ro PROGBITS 00000000 084300 000c00 00 WA 0 0 4 [22] .dynamic DYNAMIC 00000000 084f00 000100 08 WA 6 0 4 [23] .got PROGBITS 00000000 085000 0001cc 04 WA 0 0 4 [24] .data PROGBITS 00000000 0851d0 001004 00 WA 0 0 8 [25] .bss NOBITS 00000000 0861d4 00269c 00 WA 0 0 8 [26] .ARM.attributes ARM_ATTRIBUTES 00000000 0861d4 00002a 00 0 0 1 [27] .shstrtab STRTAB 00000000 0861fe 0000fe 00 0 0 1 Key to Flags: W (write), A (alloc), X (execute), M (merge), S (strings), I (info), L (link order), O (extra OS processing required), G (group), T (TLS), C (compressed), x (unknown), o (OS specific), E (exclude), y (purecode), p (processor specific)
-
Clone Kopycat project git repo:
git clone https://github.com/inforion/kopycat.git
-
Import whole Kopycat project into IntelliJ
- Create a new project in IntelliJ from existing sources where you have cloned Kopycat repository
- When creating new project specify
Import project from external model -> Gradle - Choose import project when IntelliJ has loaded sources and wait until project is indexed
After project has been imported, you will have the next project structure:
buildSrccontains Gradle plugins for build systemkopycatcontains the emulator core and library manager. Also insrc/main/kotlin/ru/inforion/lab403/kopycat/modulesembedded modules such as memories (RAM, ROM, NAND, etc), terminals, etc. are placedkopycat-modulescontains user's modules (devices)corescontains processor cores x86, mips, arm, etc.mcucontains microprocessors units based on these cores (i.e. elanSC520, stm32f0xx, etc.)devicescontains devices based on MCUs
cores,mcu,devicesin project naming convention called library and a bunch of libraries called registry. When starting Kopycat you should specify registry path with compiled modules using-yparameter. Division on libraries is just an agreement to organize modules. -
Go to the sources of examples in
kopycat-modules:kopycat-modules/misc/examples/src/main/kotlin/ru/inforion/lab403/examples/NOTE: As an examplevirtarm,stm32f042_bytesandstm32f042_ihexare placed here -
Create an Object file in this directory using IntelliJ right-click menu, for example,
test. This will be an entry point. -
Write the next code in it:
package ru.inforion.lab403.examples import ru.inforion.lab403.common.extensions.hex8 import ru.inforion.lab403.common.extensions.unhexlify import ru.inforion.lab403.kopycat.cores.arm.hardware.processors.AARMCPU import ru.inforion.lab403.kopycat.cores.base.common.Module import ru.inforion.lab403.kopycat.gdbstub.GDBServer import ru.inforion.lab403.kopycat.modules.stm32f042.STM32F042 import ru.inforion.lab403.kopycat.modules.terminals.UartSerialTerminal object test { @JvmStatic fun main(args: Array<String>) { // Create simple firmware // movs r0, #3 // movs r1, #7 // adds r2, r1, r0 val firmware = "0000000009000000032007210a18".unhexlify() // Create top-level module. It's necessarily only one top! val top = object : Module(null, "top") { // Place STM32F042 inside top module val mcu = STM32F042(this, "mcu", firmware) // Place virtual terminal -> will be created using socat // You could create virtual terminal by yourself using socat and specify path to /dev/tty... // For windows user you should use Com2Com and specify manually COMX from it val term1 = UartSerialTerminal(this, "term1", "socat:") init { // Make actual connection between STM32F042 and Virtual terminal buses.connect(mcu.ports.usart1_m, term1.ports.term_s) buses.connect(mcu.ports.usart1_s, term1.ports.term_m) // ARM debugger already in stm } } // initialize and reset top module and all inside top.initializeAndResetAsTopInstance() // start GDB server on port 23946 val gdb = GDBServer(23946, true, binaryProtoEnabled = false) // connect GDB and device debugger gdb.debuggerModule(top.debugger) // HERE EMULATOR READ TO WORK WITH GDB // Below just code to see different API styles // step CPU core using debugger top.debugger.step() // read CPU register using debugger API var r0 = top.debugger.regRead(0) var r15 = top.debugger.regRead(15) println("using debugger API: r0 = 0x${r0.hex8} r15 = 0x${r15.hex8}") // read CPU register using core API r0 = top.core.reg(0) r15 = top.core.reg(15) println("using Core/CPU API: r0 = 0x${r0.hex8} r15 = 0x${r15.hex8}") // read CPU register using internal CPU API val arm = top.core.cpu as AARMCPU r0 = arm.regs.r0.value r15 = arm.regs.pc.value println("using internal API: r0 = 0x${r0.hex8} r15 = 0x${r15.hex8}") // process here will wait until debugger stop } }
NOTE: This example is also placed in project sources as
stm32f042_bytes. -
Run the application using green triangle near
fun main(args: Array<String>)and you should see log:15:28:04 WRN ...cat$Companion.createPseudoTerminal(Socat.kt:75): Pseudo-terminals created for top.term1: /dev/ttys020 and /dev/ttys021 15:28:05 CFG ....initializeAndResetAsTopInstance(Module.kt:189): Setup core to top.mcu.cortexm0.arm for top 15:28:05 CFG ....initializeAndResetAsTopInstance(Module.kt:194): Setup debugger to top.mcu.dbg for top 15:28:05 WRN ....initializeAndResetAsTopInstance(Module.kt:210): Tracer wasn't found in top... 15:28:05 CFG ...s.UartTerminal$tx$2.invoke(UartTerminal.kt:176): Create transmitter UART terminal thread: 'top.term1' 15:28:05 CFG ....initializeAndResetAsTopInstance(Module.kt:218): Initializing ports and buses... 15:28:05 WRN ....initializeAndResetAsTopInstance(Module.kt:220): ATTENTION: Some ports has warning use printModulesPortsWarnings to see it... 15:28:05 INF ...modules.cortexm0.CORTEXM0.reset(CORTEXM0.kt:58): Setup CORTEX-M0 core PC=0x00000009 MSP=0x00000000 15:28:05 CFG ....initializeAndResetAsTopInstance(Module.kt:232): Module top is successfully initialized and reset as a top cell! 15:28:05 INF ...bstub.GDBServer.debuggerModule(GDBServer.kt:78): Set new debugger module top.mcu.dbg for GDB_SERVER(port=23946,alive=true) using debugger API: r0 = 0x00000003 r15 = 0x0000000B using Core/CPU API: r0 = 0x00000003 r15 = 0x0000000A using internal API: r0 = 0x00000003 r15 = 0x0000000A 15:28:05 INF ...iliary.ANetworkThread.run(ANetworkThread.kt:55): GDB_SERVER waited for clients on [192.168.69.254:23946]NOTE: Different r15 register value is the result of the convention: technically ARM CPU is at 0x00000008 (set using second dword of firmware), but the last two bits of PC specifies in which mode CPU operates (ARM, THUMB). For Kopycat this information is stored in a special internal variable, but for the debugger we should signal that CPU is in THUMB mode.
In this example a different method to work with emulator is also shown.
Similar example for VirtARM with Linux is shown in the source misc/examples/main/kotlin/ru/inforion/lab403/examples/virtarm.kt
-
Do steps 1-3 from the previous abstract
-
Create a module code structure
-
Create a new library or choose one of the existing in the
kopycat-modules. For example, in the next part we will usemculibrary. -
Inside
mculibrary create a new folder and name it after your module, for example,testbench. -
Inside
testbenchcreate a new text file with a namebuild.gradleand write the next code into it:plugins { id 'ru.inforion.lab403.gradle.kopycat' // kopycat gradle build plugin } group 'ru.inforion.lab403.kopycat' // choose any group you want but follow package rules of Java version '0.1' buildKopycatModule { library = "mcu" // library must be a similar to modules library (in our case mcu) require += "cores:arm" // comma separated modules dependency - in our case only arm core } -
To the file
settings.gradlein the project root add the following line:include(":kopycat-modules:mcu:testbench") -
Reimport the project and IntelliJ should create a folder structure by itself and a blue square should appear near
testbench. If the structure has not been created then make it by yourself following the next rule:src/main/kotlin/<GROUP>/modules/<MODULE_NAME>- let's name this directorySRC_DIRwhere
<GROUP>- group that you specified inbuild.gradlefile and<MODULE_NAME>, your module name. -
Create a new Kotlin class file in
SRC_DIR(name it as you wish but follow Kotlin file naming convention, and we recommend to use module name for the main file) i.e.Testbench
NOTES:
- you could use this structure for future modules
- you could place several devices in one module
-
-
Write code of your
testbenchdevice inTestbenchfilepackage ru.inforion.lab403.kopycat.modules.testbench import ru.inforion.lab403.common.extensions.MHz import ru.inforion.lab403.kopycat.cores.base.common.Module import ru.inforion.lab403.kopycat.cores.base.common.ModuleBuses import ru.inforion.lab403.kopycat.modules.cores.ARMv6MCore import ru.inforion.lab403.kopycat.modules.memory.RAM // Kopycat library manager looks for classes inherited from Module class class Testbench(parent: Module?, name: String) : Module(parent, name) { // Add ARMv6 core into testbench device // First argument is parent module (where instantiated device fold) // Second argument is name (aka designator) can be any unique name val arm = ARMv6MCore(this, "arm", frequency = 10.MHz, ipc = 1.0) // Add modifiable memory region into testbench device (size = 1 MB) val ram = RAM(this, "ram", size = 0x10_0000) // Create internal buses description for testbench device // Buses are somelike wires and used to connect different parts of device inner class Buses : ModuleBuses(this) { val mem = Bus("mem") } // Assign new buses description to testbench device override val buses = Buses() // Make actual connection between CORE and RAM init { arm.ports.mem.connect(buses.mem) ram.ports.mem.connect(buses.mem, offset = 0x0000_0000) } }
Now you could compile and run emulator in two ways:
- first: instantiate testbench using code
- second: use Kopycat library manager
-
Instantiate testbench
-
Create somewhere in the project folder structure object file
Starter, i.e. insideSRC_DIR -
Write the following code in it:
package ru.inforion.lab403.kopycat.modules.testbench import ru.inforion.lab403.kopycat.cores.base.enums.Datatype.* object Starter { @JvmStatic fun main(args: Array<String>) { // Create our Testbench device val top = Testbench(null, "testbench") // Initialize it as a top device (device that has no parent) top.initializeAndResetAsTopInstance() // Write some instructions into memory top.core.write(WORD, 0x0000_0000, 0x2003) // movs r0, #3 top.core.write(WORD, 0x0000_0002, 0x2107) // movs r1, #7 top.core.write(WORD, 0x0000_0004, 0x180A) // adds r2, r1, r0 // Setup program counter // Note, that we may use top.arm.cpu.pc but there is some caveat here // top.arm.cpu.pc just change PC but don't make flags changing (i.e. change core mode) // so be aware when change PC. top.arm.cpu.BXWritePC(0x0000_0000) // Make a step top.arm.step() assert(top.core.reg(0) == 3L) // Make another step top.arm.step() assert(top.core.reg(1) == 7L) // And one more step top.arm.step() assert(top.core.reg(2) == 10L) } }
Note, this is simple standard application for Kotlin language.
-
Run the application using green triangle near
fun main(args: Array<String>)and you should see:12:25:28 CFG ....initializeAndResetAsTopInstance(Module.kt:189): Setup core to testbench.arm for testbench 12:25:28 CFG ....initializeAndResetAsTopInstance(Module.kt:194): Setup debugger to testbench.dbg for testbench 12:25:28 WRN ....initializeAndResetAsTopInstance(Module.kt:210): Tracer wasn't found in testbench... 12:25:28 CFG ....initializeAndResetAsTopInstance(Module.kt:218): Initializing ports and buses... 12:25:28 WRN ....initializeAndResetAsTopInstance(Module.kt:220): ATTENTION: Some ports has warning use printModulesPortsWarnings to see it... 12:25:28 CFG ....initializeAndResetAsTopInstance(Module.kt:232): Module testbench is successfully initialized and reset as a top cell! Process finished with exit code 0Since we set
assertfunction on registers values, it means that the execution has successfully completed. -
To make possible connection with GDB debugger (IDA Pro or CLion):
-
add the following line after the
arminstantiation inTestbenchclass:val dbg = ARMDebugger(this, "dbg")
-
add the following lines to the
initsection inTestbenchclass:dbg.ports.breakpoint.connect(buses.mem) dbg.ports.reader.connect(buses.mem)
-
add the following line at the end of the
mainfunction inStarter:GDBServer(23946, true, binaryProtoEnabled = false).also { it.debuggerModule(top.debugger) }
-
after that you can connect using IDA Pro, CLion or other GDB compatible debugger using port 23946
-
-
-
Use Kopycat library manager
This case may be required for dynamic loading modules from library.
-
Add run configurations as show in the screenshot below:
First add kopycat-arm-build configuration:
Then add kopycat-testbench-build (please, pay attention on "before launch" section at bottom of run configuration window):
And finally kopycat-testbench (please, pay attention on "before launch" section at bottom of run configuration window):
-
Start
kopycat-testbenchconfiguration and after successful start you will see the following log:12:28:09 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:54): Build version: kopycat-0.3.30-e87ed235-2021.115-Regular [JRE v11.0.6] 12:28:10 INF ...atStarter.getRegistryPath(KopycatStarter.kt:34): Kopycat directory: '<KOPYCAT_HOME>' 12:28:13 INF ...kopycat.Kopycat.setSnapshotsDir(Kopycat.kt:103): Change snapshots directory to '/Users/bat/Documents/repos/kopycat-private/temp' 12:28:13 INF ...pycat.KopycatStarter.main(KopycatStarter.kt:78): GDB_SERVER(port=23946,alive=true) was created 12:28:13 INF ...ibrary.instantiate(ModuleFactoryLibrary.kt:105): Testbench(null, top) 12:28:13 INF ...iliary.ANetworkThread.run(ANetworkThread.kt:55): GDB_SERVER waited for clients on [192.168.76.24:23946] 12:28:14 CFG ....initializeAndResetAsTopInstance(Module.kt:189): Setup core to top.arm for top 12:28:14 CFG ....initializeAndResetAsTopInstance(Module.kt:194): Setup debugger to top.dbg for top 12:28:14 WRN ....initializeAndResetAsTopInstance(Module.kt:210): Tracer wasn't found in top... 12:28:14 CFG ....initializeAndResetAsTopInstance(Module.kt:218): Initializing ports and buses... 12:28:14 WRN ....initializeAndResetAsTopInstance(Module.kt:220): ATTENTION: Some ports has warning use printModulesPortsWarnings to see it... 12:28:14 CFG ....initializeAndResetAsTopInstance(Module.kt:232): Module top is successfully initialized and reset as a top cell! 12:28:14 INF ...ion.lab403.kopycat.Kopycat.open(Kopycat.kt:151): Board top[Testbench] with arm[ARMv6MCore] is ready 12:28:14 INF ...bstub.GDBServer.debuggerModule(GDBServer.kt:78): Set new debugger module top.dbg for GDB_SERVER(port=23946,alive=true) 12:28:14 WRN ...at.KopycatStarter.console(KopycatStarter.kt:44): Use -kts option to enable Kotlin console. In the next version Kotlin console will be default. 12:28:14 CFG ...at.consoles.jep.JepLoader.load(JepLoader.kt:53): Loading Jep using Python command 'python3' to overwrite use '--python' option 12:28:14 CFG ...oles.jep.PythonShell.version(PythonShell.kt:34): Python Version(major=3, minor=9, micro=0) 12:28:14 CFG ...s.jep.JepLoader.findFileInPath(JepLoader.kt:25): Jep jar file: /usr/local/lib/python3.9/site-packages/jep/jep-3.9.1.jar 12:28:14 CFG ...s.jep.JepLoader.findFileInPath(JepLoader.kt:25): Jep shared library file: /usr/local/lib/python3.9/site-packages/jep/jep.cpython-39-darwin.so Jep starting successfully! 12:28:15 INF ...ycat.KopycatStarter.main(KopycatStarter.kt:112): Python console enabled Python >NOTE: In this case we have not added any data into RAM and have not set PC. You could do it inside
Testbench
-