Merge pull request #79 from emiyl/master

3.72 support

_pages/en_US/faq.txt

@@ -3,10 +3,10 @@ title: "FAQ"
 ---
 
 <a name="faq_latestfw" />**Q:** *I am on the latest system version, is my device hackable?*
-**A:** Not at this time.
+**A:** Yes, 3.72 is hackable at the moment.
 
 <a name="faq_downgrade" />**Q:** *Can I downgrade my Vita?*
-**A:** Yes, but only if the console is already on a hackable firmware. Modoru can downgrade any system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
+**A:** Yes, but only if the console is already on 3.70 or below. Modoru can downgrade any 3.70 or below system hacked with HENkaku or H-Encore to any firmware equal or greater than the firmware the console came with out of the box.
 
 <a name="faq_update" />**Q:** *Is it safe to update a Vita with CFW?*
 **A:** No! You must always ensure that you have blocked updates as specified at the end of [Finalizing Setup](finalizing-setup).

_pages/en_US/finalizing-setup.txt

@@ -95,7 +95,7 @@ We will also block updates using a DNS server. The server tricks your device int
 1. Check "Enable PSN spoofing"
 1. Check "Enable Version Spoofing"
 1. Navigate to "Spoofed Version"
-1. Enter "3.71" into the box
+1. Enter "3.72" into the box
   + Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
 1. Close the Settings application
 

_pages/en_US/get-started.txt

@@ -11,7 +11,7 @@ Different device versions will require different steps to achieve the end goal o
 Before starting, Windows users should enable the option to show file extensions using [File Extensions (Windows)](file-extensions-(windows))!
 {: .notice--info}
 
-Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.63" row includes 1.03, 3.63, and all versions in-between.
+Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 1.03 to 3.57" row includes 1.03, 3.57, and all versions in-between.
 
 Your device version can be found under the System Information menu in the System category of the Settings application.
 
@@ -47,31 +47,12 @@ Your device version can be found under the System Information menu in the System
     <tr>
       <td style="text-align: center; font-weight: bold;">3.61</td>
       <td style="text-align: center; font-weight: bold;">3.63</td>
-      <td style="text-align: center; font-weight: bold;"><a href="updating-firmware-(ps-vita-3.65-and-3.68)">Updating Firmware (PS Vita 3.65 and 3.68)</a><br>or<br><a href="updating-firmware-(ps-tv-3.65-and-3.68)">Updating Firmware (PS TV 3.65 and 3.68)</a></td>
+      <td style="text-align: center; font-weight: bold;"><a href="updating-firmware-(ps-vita-3.65)">Updating Firmware (PS Vita)</a><br>or<br><a href="updating-firmware-(ps-tv-3.65)">Updating Firmware (PS TV)</a></td>
     </tr>
     <tr>
       <td style="text-align: center; font-weight: bold;">3.65</td>
-      <td style="text-align: center; font-weight: bold;">3.65</td>
-      <td style="text-align: center; font-weight: bold;"><a href="installing-h-encore">Installing h-encore</a></td>
-    </tr>
-    <tr>
-      <td style="text-align: center; font-weight: bold;">3.67</td>
-      <td style="text-align: center; font-weight: bold;">3.67</td>
-      <td style="text-align: center; font-weight: bold;"><a href="updating-firmware-(ps-vita-3.65-and-3.68)">Updating Firmware (PS Vita 3.65 and 3.68)</a><br>or<br><a href="updating-firmware-(ps-tv-3.65-and-3.68)">Updating Firmware (PS TV 3.65 and 3.68)</a></td>
-    </tr>
-    <tr>
-      <td style="text-align: center; font-weight: bold;">3.68</td>
-      <td style="text-align: center; font-weight: bold;">3.68</td>
+      <td style="text-align: center; font-weight: bold;">3.72</td>
       <td style="text-align: center; font-weight: bold;"><a href="installing-h-encore">Installing h-encore</a></td>
     </tr>
-    <tr>
-      <td style="text-align: center; font-weight: bold;">3.69</td>
-      <td style="text-align: center; font-weight: bold;">3.70</td>
-      <td style="text-align: center; font-weight: bold;"><a href="preparing-for-trinity">Preparing for Trinity</a></td>
-    </tr>
-    <tr>
-      <td style="text-align: center; font-weight: bold;" colspan="2">3.71</td>
-      <td style="text-align: center; font-weight: bold;"><a href="blocking-updates">Blocking Updates</a></td>
-    </tr>
   </tbody>
 </table>

_pages/en_US/home.txt

@@ -62,7 +62,7 @@ Ensō is available on all devices with firmware version 3.65 or below, while hig
 ## What do I need to know before starting?
 
 + **Before beginning the guide, you must know the risks of Vita hacking: EVERY time you modify your system, there is always the potential for an UNRECOVERABLE brick. They're rare, but still a possibility so make sure you follow ALL directions EXACTLY.**
-+ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.70
++ This guide will work on all PS Vita, PS Vita Slim, and PS TV devices in all regions on firmwares from 1.03 to 3.72
 + If everything goes according to plan, you will lose no data and end up with everything that you started with (games, PSN Account, saves, etc will be preserved).
 + **Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!**
 + The PS Vita 2000 and PS TV models are essentially identical to the original PS Vita 1000 in terms of software. All steps which say "PS Vita" also apply to other models unless otherwise specified.

_pages/en_US/installing-h-encore.txt

@@ -1,31 +1,37 @@
 ---
-title: "Installing h-encore"
+title: Installing h-encore
 ---
 
 {% include toc title="Table of Contents" %}
 
 ### Required Reading
 
-The h-encore exploit chain for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 and 3.68.
+The h-encore exploit for the PS Vita (TV) allows for the installation of homebrew applications to your home screen. It is compatible with the firmware versions 3.65 to 3.72.
 
-Note that the h-encore exploit chain is not "persistent" (meaning it does not remain installed after a reboot). For the purposes of these instructions, we will be merely using it in order to gain the level of access required to downgrade to firmware version 3.60 in order to install more powerful exploits.
+Note that the h-encore exploit chain is not “persistent” (meaning it does not remain installed after a reboot). This means you will have to run the exploit again after each reboot.
 
-In addition to installing the h-encore exploit, we enable access to "unsafe" homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the "administrator" mode on a computer.
+In addition to installing the h-encore exploit, we enable access to “unsafe” homebrew which gives extended permissions to homebrew applications. This idea could be considered analogous to the “administrator” mode on a computer.
+
+If you are on firmware versions 3.65 to 3.68, you will be using the h-encore exploit, however if you are on firmware versions 3.69 to 3.72, you will be using the h-encore² exploit. The program we use to install the exploit to your console (finalhe) should sort this out for you.
+
+Downgrading with modoru while using the h-encore² on firmware 3.71 and above can stop your device from working. Do not downgrade your device until further notice.
+{: .notice--danger}
 
 If you have a PS Vita 1000, you must also have an official Sony memory card (of any size) to follow this guide. This restriction does not apply to the PS Vita 2000 or PS TV as those devices have a built-in memory card.
 {: .notice--info}
 
 ### What You Need
 
 * The latest release of [finalhe](https://github.com/soarqin/finalhe/releases/latest)
+  - If you are using MacOS or Linux you will be required to compile finalhe yourself
 
 ### Instructions
 
 #### Section I - finalhe
 
 1. Copy the contents of the finalhe `.zip` to a folder on your computer
 1. Launch finalhe on your computer
-  + If you are using a Windows computer and are prompted to allow finalhe network access through the firewall, do so
+  + If you are prompted to allow finalhe network access through the firewall, do so
 1. Launch the Content Manager application on your device
 1. Select "Copy Content"
 1. Select "PC"
@@ -36,18 +42,19 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
   + If you encounter a message instructing you to update, reboot your device and try again
   + If you still encounter this message, follow the instructions on [Blocking Updates](blocking-updates) and try again
   + If you *still* encounter this message, enable Flight Mode in the System Settings and try again (this will *not* work on PS TVs)
-  + If your device is not detected over USB on Windows, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
+  + If your device is not detected over USB, install [QcmaDriver_winusb](https://github.com/soarqin/finalhe/releases/download/v1.3/QcmaDriver_winusb.exe) and try again
 
 #### Section II - h-encore Transfer
 
 1. Select "Trim h-encore to ~13MB"
+  + Only do this step if you are on 3.68 or below
 1. Select "Let's GO!"
   + The exploit files will be automatically downloaded and prepared
   + This process will take some time
 1. Select "PC -> PS Vita System" on your device
 1. Select "Applications"
 1. Select "PS Vita"
-1. Select "h-encore"
+1. Select "h-encore" or "h-encore²" depending on which is displayed
 1. Select "Copy"
 1. Select "OK"
   + The h-encore exploit will be copied to your device
@@ -57,6 +64,9 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
 
 #### Section III - Configuring h-encore
 
+h-encore² only has a ~25% success rate. It may take a long time to launch the h-encore² exploit.
+{: .notice--warning}
+
 1. Launch the h-encore application while holding (R)
   + If prompted about trophies, continue holding (R) and select "Yes"
 1. If the exploit was successful, you will now see the h-encore bootstrap menu
@@ -80,5 +90,8 @@ If you have a PS Vita 1000, you must also have an official Sony memory card (of
 
 ___
 
-### Continue to [Downgrading Firmware (3.60)](downgrading-firmware-(3.60))
+### If you are on firmware version 3.70 or below, continue to [Downgrading to 3.60](downgrading-firmware-(3.60))
+{: .notice--primary}
+
+### If you are on firwmare version 3.71 or above, continue to [Finalizing Setup](finalizing-setup)
 {: .notice--primary}