This is the etm user manual. It is best viewed at GitHub.io where all the internal, contents links work correctly. etm itself is available from PyPi and GitHub and further information from the etm discussion group at groups.io. Brief how-to videos are available at youtube.
- Overview
- Details
etm began life in 2013 as etm-qt sporting a gui based on Qt. The intent was to provide an app supporting GTD (David Allen's Getting Things Done) and exploiting the power of python-dateutil. The name changed to etmtk in 2014 when Tk replaced Qt. Development of etmtk continued until 2019 when name changed to etm-dgraham, to honor the PyPi naming convention, and the interface changed to a terminal based one based on prompt_toolkit. Features have changed over the years but the text based interface and basic format of the reminders has changed very little. The goal has always been to be the Swiss Army Knife of tools for managing reminders.
etm offers a simple way to manage your events, tasks and other reminders.
Rather than filling out fields in a form to create or edit reminders, a simple text-based format is used. Each reminder in etm begins with a type character followed by a brief summary of the item and then, perhaps, by one or more @key value pairs to specify other attributes of the reminder. Mnemonics are used to make the keys easy to remember, e.g, @s for scheduled datetime, @l for location, @d for description and so forth.
The 4 types of reminders in etm with their associated type characters:
| type | char |
|---|---|
| task | - |
| event | * |
| journal | % |
| goal | ~ |
| inbox | ! |
See Item Types for details about these item types and Options for details about possible attributes.
-
A task (-): pick up milk.
- pick up milk -
An event (*): have lunch with Ed [s]tarting next Tuesday at 12pm and [e]xtending for 90 minutes, i.e., lasting from 12pm until 1:30pm.
* Lunch with Ed @s tue 12p @e 90m -
A journal entry (%): a favorite Churchill quotation that you heard at 2pm today with the quote itself as the [d]escription.
% Give me a pig - Churchill @s 2p @d Dogs look up at you. Cats look down at you. Give me a pig - they look you in the eye and treat you as an equal.The summary, "Give me a pig - Churchill" in this example, follows the type character and is meant to be brief - analagous to the subject of an email. The optional description follows the "@d" and is meant to be more expansive - analagous to the body of an email.
-
A task (-): build a dog house, with component [j]obs.
- Build dog house @j pick up materials @j cut pieces @j assemble @j sand @j paint -
A goal (~): practice guitar 4 times per week starting this week:
~ practice guitar @s now @q 3 -
Inbox (!): meet Alex for coffee Friday.
! Coffee with Alex @s fri @e 1hThis can be changed to an event when the details are confirmed by replacing the ! with an * and adding the time to
@s. This inbox entry will appear highlighed on the current day in agenda view until you make the changes. -
An appointment (event) for a dental exam and cleaning at 2pm on Feb 5 and then again [@+] at 9am on Sep 3.
* dental exam and cleaning @s 2p feb 5 2019 @e 45m @+ 9am Sep 3 2019
-
Text entry removes the need to hunt for and click in the relevant entry box and allows you to keep your fingers on the keyboard.
-
Text entry supports the full flexibility of the superb Python dateutil package. Consider, for example, creating a reminder to vote for President election day which repeats every 4 years on the first Tuesday after a Monday in November (a Tuesday whose monthday falls between 2 and 8). In etm, this event would be
* Presidential election day @s nov 1 2020 @r y &i 4 &M 11 &m 2, 3, 4, 5, 6, 7, 8 &w tuTry this with a form based calendar application.
When you want to create a new reminder or edit an exiting one, etm opens an area at the bottom of the screen that is divided into two parts by a horizontal line. The lower part is the entry area where what you type appears. The upper part is the prompt/feedback area where etm responds to your typing. This response might take the form of providing a suggestion about alternatives, information about the type of input required or feedback about how your current entry is being interpreted. It is important to realize that none of this interferes with your typing - you can blaze away as quickly as you like or even paste complete entries and never glance at the prompt if you like. This is the unobtrusive part of the prompt/feedback process.
Here is a link to a video of scheduling a lunch step by step: lunch step by step.
Whenever etm expects a datetime entry as, for example, when you are entering an @s scheduled datetime, it applies fuzzy parsing to your entry. Suppose it is Dec 17 2019, your computer is in the Eastern timezone and you have just entered @s for your lunch event
scheduled
scheduled date or datetime
────────────────────────────────────────────────────────────
* lunch @s_
If you enter 1, etm will interpret it as 1am on the current date in the local timezone.
scheduled
Tue Dec 17 2019 1:00am EST
────────────────────────────────────────────────────────────
* lunch @s 1_
Adding p changes the interpretation to 1pm.
scheduled
Tue Dec 17 2019 1:00pm EST
────────────────────────────────────────────────────────────
* lunch @s 1p_
Now start adding 'fri' by appending an 'f'.
scheduled
'1p f' is incomplete or invalid
────────────────────────────────────────────────────────────
* lunch @s 1p f_
and etm will complain that the entry is now either incomplete or invalid. Add the remaining 'ri'.
scheduled
Fri Dec 20 2019 1:00pm EST
────────────────────────────────────────────────────────────
* lunch @s 1p fri_
and etm understands that you want the coming Friday, Dec 20. Now suppose that you will be in California on Friday and you want Pacific, not Eastern time. Then add an entry for @z.
scheduled
local datetime: Fri Dec 20 2019 4:00pm EST
────────────────────────────────────────────────────────────
* lunch @s 1p fri_ @z US/Pacific
Note that local datetime is now prepended to the result which is still displayed in the local timezone, since that is the location of your computer, but the time has changed to 4:00pm EST which, of course, is the same time as 1:00pm PST. etm always displays times in the current local time zone. When you save this item, the time will be converted to universal time and the @z US/Pacific will be deleted - once the time has been converted, the original timezone is no longer relevant.
What if you had entered the 'fri' first?
scheduled
Fri Dec 20 2019
────────────────────────────────────────────────────────────
* lunch @s fri
Here etm supposes again that you want the coming Friday, Dec 20 but without a time being specified, it is interpreted as a date rather than a datetime and thus without a timezone. Add the 1p and timezone the result will be the same as before.
As a final illustration, suppose you want to be reminded of lunch at 1pm in whatever timezone you happen to be, i.e., you want the datetime to float to the local timezone. Add the @z.
timezone
a timezone entry such as 'US/Eastern' or 'Europe/Paris'
or 'float' to specify a naive/floating datetime
────────────────────────────────────────────────────────────
* lunch @s fri 1p @z
and note that supplying 'float' as the timezone does the trick.
scheduled
Fri Dec 20 2019 1:00pm
────────────────────────────────────────────────────────────
* lunch @s fri 1p_ @z float
The datetime now appears without either the 'local datetime' prefix or the 'EST' suffix which reveals that it is a naive/floating datetime.
The assumption here is that when a user enters a date, a date is what the
user wants. When both a date and time are given, what the user wants
is a datetime and, most probably, one based on the local timezone. Less
probably, one based on a different timezone and that requires the addition
of the @z and timezone. Still less probably, one that floats and this
requires the addition of the @z and 'float'.
Note: When entering dates, ., - or / can be used to separate the components.
The interpretation of the date depends upon the 'dayfirst' and 'yearfirst' settings
in the etm configuration file - see configuration for details
about these settings. For example, with both dayfirst and yearfirst false,
6/1 => June 1 in the current year
but after changing dayfirst to true
6/1 => January 6 in the current year
Relative datetimes can be entered using period strings either instead of or in addition to datetimes using the format:
[datetime] [period string]
Either the datetime or the period string is required but both are allowed. The period string must begin with either a plus or a minus sign.
If the datetime is omitted and
- the period string involves d (days), w (weeks) or M (months), then the assumed datetime is the current date,
- the period string involves only h (hours) or m (minutes), then the assumed datetime is the current time
Examples supposing it is currently 1:20pm on July 15:
+1h30m => 2:50pm on July 15
+3d => July 18
-3d => July 12
8a => 8am on July 15
8a +1h30m => 9:30am on July 15
8a +3d => 8am on July 18
Some optional attributes that can be used in reminders can be tedious to enter either because they are lengthy or because they are used often and typographical errors would introduce inconsistencies. These attributes include the following:
- @g: goto url or filepath. In the latter case, the system default application is used to open the filepath, e.g., on my macbook the system default for files ending in
.pyis to open them in MacVim. In the former case, the url will be opened in the default browser. In either case, a typo would likely render the link useless. - @l: location/context. In the do next view,
locationis used to organize undated tasks. Using@l errandsin one task and@l erandsin another would cause these tasks to be grouped separately. - @i: index - forward slash delimited string. In both the index and the used time views, the index entry is used to group and aggregate entries. Using
@i jsmith/project ain one entry and@i jsmth/project ain another would cause these these entries to be grouped and aggregated separately. - @n: attendee. string using "[name:] address" format. If "address" begins with exactly 10 digits followed by an "@" it is treated as a mobile phone number. Otherwise it is treated as an email address. The optional "name:" can be used to facilitate autocompletion. Attendee entries are used in both email and text alerts.
Other tracked attributes include @c (calendar) and @t (tag).
For these attributes, etm keeps a record of each usage. I.e., for each reminder in your etm database, if the reminder includes a tracked attribute that has not already been included in the list of completions, then that attribute will be added. E.g., if you create an reminder containing
@n joe: [email protected]
and '@n joe: [email protected]' is not already in the list of completions, then it would be added.
When you next create a reminder and enter @n, etm will pop up a sorted list of every item in the completion list that begins with @n. You can use the up and down cursor keys to move through this list or you can continue typing to limit the possible completions, e.g., after entering '@n joe' only those completions that start with '@n joe' would still be displayed. When you have selected the completion you want, press the space bar to insert the completion in your entry.
etm has several ways of viewing entries. These are listed below by the shortcut key used to activate the view. E.g., pressing a activates Agenda view shown below. In each of the views, the etm menus appear at the top and the status bar at the bottom. The latter displays the current datetime and the name of the view.
The display for each reminder shows the itemtype and summary column on the left followed by a flags column which displays a combination of letters from 'g' (goto), 'k' (connection), 'p' (pinned) and 't' (timer) reflecting the presence of these attributes in the reminder. This column is sometimes followed on the extreme right by another column whose contents depends on the view. E.g. in index and journal views the 'id' of the reminder is displayed while in history view, the last modification timestamp of the reminder is displayed.
- a: Agenda: dated unfinished tasks and other reminders by year-week and week day
- b: Busy: a graphical illustration of busy and conflicted times by year-week
- c: Completed: finished tasks and jobs and used time entries by year-week and week day
- d: Do Next: undated tasks grouped by location/context and ordered by priority (highest first) and extent (least first)
- e: Effort: instances of reminders with used time entries with daily totals displayed graphically
- f: Forthcoming: unfinished dated tasks and other dated reminders by next occurrence
- g: Goals: the status of all goal reminders as of the current year and week
- h: History: all items by the latter of the modified or created datetimes in descending order, i.e., most recent first. Datetimes are displayed using a 5 character format where, e.g., 1:15pm today would be displayed as 13:15, November 7 of the current year as 11/17 and January 15 of 2012 as 12.01.
- i: Index: all items grouped hierarchically by index entry
- j: Journal: journal entries grouped hierarchically by index entry
- k: Konnection: items with @k konnection links either to or from the selected item.
- l: Location: items grouped hierarchically by location entry
- m: Timers: items with timers.
- p: Pinned: items whose pin status is on.
- q: Query: items matching a user specified query. Enter ? for query usage.
- r: Review: undated tasks sorted by the time since the task was last modified with the most recently modified last.
- t: Tags: all items with @t tag entries grouped by tag
- u: Used Time: all items with @u used time entries grouped by month and hierarchically by index
- U: Used Summary: used time aggregates grouped by month and hierarchically by index
- y: Yearly Planning Calendar: compact monthly calendar.
The agenda, busy, completed and effort views display one week at a time and are synchronized so that all four views always display the same week. Press the ▶ (right) or ◀ (left) cursor keys go forward or backward a week at a time or press the space bar to jump to the week containing the current day. You can also press "end" and enter a date to jump to the week containing the date.
In agenda view, only days with scheduled reminders are listed. If nothing is scheduled for the entire week, then "Nothing scheduled" is displayed.
In busy view, only days that have events with busy times (@e and/or @w entries) are displayed. Press the number of the weekday, [1→Mon, ..., 7→Sun], to show the details of the busy periods from that day or press the ▼ (down) or ▲ (up) cursor keys to show the details of the next or previous day with busy periods.
Completed view shows instances of completed tasks.
effort view shows instances of reminders with used time entries with daily totals displayed graphically.
The normal agenda listing for a week day:
- all day events (events with dates as
@sentries) - datetime items (reminders with datetimes as
@sentries) by time - all day tasks (tasks with dates as
@sentries) - all day journal enties (journal entries with dates as
@sentries)
And, on the current day only:
- inbox items
- < past due warnings in descending order of the number of days past due
- > beginby warnings in ascending order of the number of days remaining
Busy view requires a little explanation. Here is screen shot of agenda view for an illustrative week
along with one of busy view for the same week
The first thing to notice in busy view is that busy times are displayed each week day for the period between 7am and 9pm. This period is determined by the beginbusy setting in cfg.yaml which sets the number of hours after midnight that the display is to begin each day. The period ends 14 hours after beginbusy. In this case, it runs from 7 hours after midnight (beginbusy) to 7+14=21 hours after midnight or from 7am until 9pm. The resolution is 15 minute periods for each character slot so that, for example, the row for Fr 2 shows a busy period with using 4 green (busy) characters for 10-10:15am, 10:15-10:30am, 10:30-10:45am and 10:45-11am. Now you might notice that this implies that the 4 character slots that begin at 8pm end just before the 9pm slot and that the 9pm slot actually corresponds to the interval 9-9:15pm. Since the actual display includes this last slot, it actually extends for 14 hours plus 15 minutes and thus actually ends at 9:15pm.
The second thing to notice is the red, conflict bar in the display for Mo 28. Since the details for this day are displayed in the "busy times" panel at the bottom as well as in the agenda view, you will notice that the conflict corresponds to the overlap between the 6-8am event and the 7-9:30am event. This conflict from 7-8am is illustrated by the 4 red (conflict) characters. Notice also that the period for the first event extends from 6-7am before the period displayed begins at 7am. The single green character to the left of 7am indicates that there were busy times before the displayed period begins. Similarly, the green character to the right of 9-9:15pm on We 30 indicates that there were busy times after 9:15pm on that day. This corresponds to the 8-10:30pm event shown in agenda view for Wednesday that extends from 9:15-10:30pm after the displayed period.
As you might expect, if a conflict occurred either before or after the displayed period then the corresponding before or after character would be red instead of green.
This view is a todo list on steroids. It displays undated and unfinished tasks grouped and sorted by their @l (location/context) entries and then, within each group by their priorities. E.g., the entry @l #next would put a task in a group at the top of the list because of the #. As another example,‘@l |someday, would put the task in a group near the end of the list because of the |.
If you're curious, here is the list of visible ASCII characters in their sorted order:
'!', '"', '#', '$', '%', '&', "'", '(', ')',
'*', '+', ',', '-', '.', '/', '0', '1', '2',
'3', '4', '5', '6', '7', '8', '9', ':', ';',
'<', '=', '>', '?', '@', 'A', 'B', 'C', 'D',
'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M',
'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V',
'W', 'X', 'Y', 'Z', '[', '\\', ']', '^', '_',
'`', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h',
'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q',
'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
'{', '|', '}', '~'
Context is useful for more than just the sorting order. Suppose you have a task that you want to deal with the next time you’re at the lake house. Just add @l at/lake house and all you have to remember is to check the subgroup 'lake house ' under the 'at' group in do next view when you’re next there. Many such contexts come to mind - at/grocery store, at/office, ...
One final useful context is 'waiting for'. E.g., completing a task might depend upon getting something from Joe. Add @l waiting for/Joe to the task and it will be listed in the subgroup 'Joe' under 'waiting for'.
This is a dedicated view only for goals. Goals are also displayed in History View, Index View and so forth, but are not displayed in Agenda View since goals apply only to the current week.
This view can be selected in etm either by pressing "g" or by selecting goals from the view menu.
Consider this illustrative screenshot from Goals View:
Notice first that there is no heading displaying a date or week since goal view displays the status of all goals at the current time.
In this screen shot "walk the dog" is selected and its details panel is displayed. The leading "3/7+2 (4.8)" in the main window indicates that 3 instances of the goal of 7 have been completed in the current week, that 2 more completions today are needed to get back on schedule for the week and that 4.8 is the current average number of the entire history completions per week for this goal. This history is displayed in the details panel.
In the main window, active goals are sorted by their done/quota ratios and given a color indicating the degree of progress toward completing the goal for the current week based on comparing the done/quota fraction to the fraction of the week that has passed. Since the current weekday, Friday, is the 5th day of the week, the fraction of the week that has passed is somewhere between 4/7 (beginning of Friday) and 5/7 (end of Friday).
- walk the dog: colored red because 3/7 is less than 4/7 and thus completions are unambiguously behind schedule for the week - 2 completions today are needed to get back on schedule.
- wash dishes: colored yellow because 3/5 is between 4/7 and 5/7 - 1 completion today is needed to get back on schedule.
- interval training: blue because 3/4 > 5/7 and thus completions are ahead of schedule for this week - no completions are needed today to stay on schedule.
This is a normal view in etm and all the normal commands are available. Additionally, these commands are available when a goal is selected:
- F: increment the completion count for the current week (by incrementing the count for the current week in @h).
- ^e: end the goal by setting the quota component of
@qequal to zero. Goals with zero quotas (or goals with quotas specifying a number of weeks that has expired) are regarded as ended. - ^a: toggle the active/inactive status by reversing the sign of the quota component of @q. Goals with negative quotas are regarded as inactive.
A goal could, of course, be deleted but this would also delete the history of completions. Ending the goal, on the other hand, preserves the history and places the goal in it's own category at the bottom of the list. And, if you ever want to un-end the goal, just change the zero quota to whatever you like. Similarly, making a goal inactive while you're away on vacation and then making it active again when you return preserves its history and the two key presses required is significantly more convenient than deleting and re-creating the goal.
This view lists all reminders with associated timers sorted by the elapsed time since the timer's state was last changed. The display for each reminder shows the itemtype and summary, any applicable flags and the elapsed time and state of the associated timer.
The sort order assures that the reminder with the active timer will always be at the top of the list and followed by the reminders with the most recently modified timers. This makes it easy to switch back and forth between recent timers.
Displays a list of the summaries and location/contexts (@l entries) of undated and unfinished tasks sorted by their (last) modified timestamp and grouped by the number of weeks since last modified.
This view is used for a periodic review of such "todos" with the goal of not letting them 'slip through the cracks'. Either editing a task or pressing "^U" with the task selected resets the modified timestamp to the current time and thus moves the task to the "this week" group at the bottom of the list.
A reasonable work flow would be to open this view once every week or so and examine tasks more than a week "old", editing them when necessary and otherwise updating the modified timestamp using "V" so that all tasks are kept within the 'last week' or 'this week' groups.
Items that have been "pinned" (have their pin status toggled on) are displayed in pinned view grouped by itemtype and sorted by the created/modified datetime.
This view can be used to flag items that need attention in your daily workflow in the same way that you might flag email in your inbox that you want to handle first. Just as you might sort your inbox to move the flagged items to the top, you can switch to pinned view to see just the reminders that need attention. And just as you would remove the flag when you finish with an email, you can unpin the reminder that no longer needs attention and thus remove it from the pinned view.
The pinned status of items is retained so long as etm is active but cleared when etm is restarted.
Items with @k konnection links either to or from other items are displayed with a 'k' in the flags column of normal views. Konnected view only displays items with such konnections. They are listed in order of their doc_ids and the view is similar to other item views, e.g., press 'space' to see the details of the selected item, 'E' to edit the selection and so forth. Unlike other item views, pressing 'k' toggles the display of the 'konnections' of the selected item. This opens a pane at the bottom of the display that shows the list of items with @k links to the selected item, then the selected item itself and finally the list of items with @k links from the selected item. This konnections display is also a normal view, e.g., selecting an item and pressing 'space' will display its details.
This view and the ability to add links between items in etm is meant to support the Zettelkasten system of note taking. The term is German for "slip box" where "slip" is a slip of paper containing a single note. These are the essential ideas:
- Each note represents a single, self-contained idea.
- Notes are linked to other, related notes.
This network of ideas and links has been compared to the brain with its network of neurons and connecting synapses. The links are the keys to both. With notes on paper slips, links required a unique label for each slip and a variety of labeling techniques have been used historically from suggestive keywords to the date and time the note was created.
Labels are built into etm since every note (journal entry), event, task or inbox entry gets a unique, integer doc_id when it is created. Links are provided by the @k konnections - e.g., adding @k 238 to an item, konnects/links that item to the item with doc_id 238.
As discussed above, konnected view provides the means for examining the network of konnections. But how are these konnections created in the first place? When you type @k into the entry area, a list of possible completions will pop up. The lines in this list contain the following item values separated by spaces:
- the item index entry
- the item type character
- the item summary
- the item doc_id
Initially the list of possible completions includes every item in the etm active database, but as you begin typing an index entry, the list collapses to show only those items which contain what you have typed thus far. At any point you can stop typing and scroll up and down the list and, finding the item you want to use for the link, press SPACE to select it and then TAB to replace the selected entry with just the doc_id from the selected entry.
What if you have an related idea while editing an item and the idea does not yet correspond to another item? Add @K comment regarding idea (note the capital K) and, when you save the item, etm will create an inbox item with your comment as its summary and then replace the @K comment regarding idea with @k doc_id using the doc_id of the new inbox item. When you have time, edit the inbox entry to better represent your idea and change the item type accordingly. You can add as many @K entries as you like - each will give rise to a new inbox item.
Other relationships are possible in etm - shared tags, common index entries, common item type, and so forth - and there are views to support examining these relationships - tags view, index view, journal view and so forth. Konnected View is uniquely intended to support examining the konnections among items.
Konnected View is specially designed to help you follow a thread of konnections. When you select an item and press 'k', a konnection view opens that shows just the items with konnections to the selected item and the items with konnections from the selected item. Selecting an item from this view and pressing 'k' closes the konnections view but moves the selection in the konnected view to the item just selected so that pressing 'k' again will show the konnections for the item just selected.
The used time and used time summary views are bound to u and U respectively. They report @u (used time) entries in your reminders, rounded up according to the usedtime_minutes setting in your cfg.yaml file and grouped by year-month and then heirarchially by @i entries.
I have a file of reminders with @i and @u entries such as
* Modi ut sit sed amet sit @s 2019-11-11 10:00am @e
1h30m
@u 58m: 2019-11-11 10:58am @u 34m: 2019-11-11 10:34am
@i client A/project a1/correspondence
@d Aliquam non sed aliquam eius tempora quisquam dolorem.
Neque quiquia labore tempora magnam. Quiquia tempora
porro est ut. Ut tempora sed non ut eius neque porro.
Sed quaerat consectetur dolor sit.
With usedtime_minutes: 6, the used time view for November begins with
November 2019
client A
project a1
correspondence
* Modi ut sit sed amet sit: 1.6h Nov 11
% Amet modi neque eius adipisci: 2.7h Nov 27
research
* Quisquam quiquia velit non: 2.0h Nov 19
project a2
correspondence
* Consectetur voluptatem dolorem: 1.0h Nov 6
* Quaerat etincidunt sed non: 0.9h Nov 13
* Consectetur eius est adipisci: 0.5h Nov 25
% Magnam labore etincidunt: 1.8h Nov 28
meeting
% Adipisci dolor labore quiquia: 0.9h Nov 7
% Adipisci eius velit porro: 1.4h Nov 14
research
* Non modi non velit eius: 1.0h Nov 20
client B
project b1
correspondence
* Dolor neque velit dolorem: 0.4h Nov 22
meeting
* Ipsum numquam porro consectetur: 0.8h Nov 15
phone
- Porro voluptatem aliquam: 1.0h Nov 12
% Amet ut dolor velit aliquam: 1.9h Nov 13
research
* Quisquam labore ut sit aliquam: 0.7h Nov 5
* Quiquia ut quisquam sit: 1.5h Nov 12
% Adipisci amet modi sed eius: 2.6h Nov 15
- Velit dolor quiquia etincidunt: 1.9h Nov 15
Note that the display is by month and, within the month, heirarchially by index entry and reminder. Note also, that the reported times are aggregates of all @u entries in the reminder. The first reminder, for example, has 2 such entries:
@u 58m: 2019-11-11 10:58am @u 34m: 2019-11-11 10:34am
Because of
usedtime_minutes: 6
in cfg.yaml, each @u timeperiod is first rounded up to the next 6 minutes and then added. Thus 58m becomes 1h, 34m becomes 36m and the sum, 1h36m, is reported in hours and tenths as 1.6h.
The reminder lines are similar to those in other views. With, e.g.,
* Modi ut sit sed amet sit: 1.6h Nov 11
selected, pressing return would display the item's details, pressing E would open it for editing and so forth.
The used time summary view for the same month begins with:
November 2019: 44.4h
client A: 13.8h
project a1: 6.3h
correspondence: 4.3h
research: 2.0h
project a2: 7.5h
correspondence: 4.2h
meeting: 2.3h
research: 1.0h
client B: 16.6h
project b1: 10.8h
correspondence: 0.4h
meeting: 0.8h
phone: 2.9h
research: 6.7h
project b2: 3.9h
meeting: 1.8h
research: 2.1h
project b3: 1.9h
correspondence: 1.9h
This view omits the reminder lines and aggregates the used times hierarchically by index entry.
As with other dated views, the left and right cursor keys go backwards and forwards a month at a time and the space bar returns to the current month. Also, pressing ^C copies the contents of the view to the system clipboard.
In query view an entry line at the bottom of the screen is used to submit queries to your data store of reminders. For example, press q to open query view, enter
includes summary waldo
and press return to see a list of reminders in which either the summary or the @d element includes a match for the case-insensitive regular expression "waldo". Each line of the display contains the item type, the summary and the document id of the matching reminder. You can use in as an abbreviation for includes. As another example
exists u and ~exists i
would display reminders with an @u element but not an @i element.
Simple queries of this type produce a list of matching items with the itemtype, summary and id displayed and sorted by id, i.e., by the order created. It is also possible to create more complex queries in which the output is displayed heirarchially using a format determined by the query parameters. Enter ? or help at the prompt to get this detailed usage information:
Return a list of items displaying the itemtype, summary and id, and sorted by id, (order created) using commands with the format:
command field [args]
where "field" is either 'itemtype', 'summary' or one of the '@-keys' such as 'l' or 's', and "command" is one of those listed below (see Simple Query Examples below for examples):
-
begins field RGX: return items in which the value of field begins with a match for the case insensitve regular expression RGX.
-
includes (or in) LST RGX: return items in which the value of one of the fields in LST includes a match for the case insensitive regular expression RGX. (LST contains all but the last, RGX, argument.)
-
equals field VAL: return items in which the value of field == VAL
-
more field VAL: return items in which the value of field >= VAL. The value of field and VAL must be comparable, i.e., both strings or both numbers
-
less field VAL: return items in which the value of field <= VAL. The value of field and VAL must be comparable, i.e., both strings or both numbers
-
exists field: return items in which field exists
-
any field LST: return items in which the value of field is a list and at least one element of field is an element of LST
-
all field LST: return items in which the value of field is a list and the elements of field contain all the elements of LST
-
one field LST: return items in which the value of field is one of the elements of LST
-
info ID: return the details of the item whose document id equals the integer ID
-
dt field EXP: return items in which the value of field is a date if EXP = '? date' or a datetime if EXP = '? time'. Else if EXP begins with '>', '=' or '<' followed by a string following the format 'yyyy-mm-dd-HH-MM' then return items where the datetime of the field value bears the specified relation to the string, with hours and minutes ignored when the value of field is a date. E.g.,
dt s < 2020-1-17would return items with @s date/times whose year <= 2020, month <= 1 and month day <= 17.
Alternatively,
dt s ? date and equals itemtype *would return events with @s date/times that are dates, i.e., all day events or occasions.
Enter the command at the 'query:' prompt and press 'enter' to submit the query and display the results. Press 'q' to reopen the entry area to submit another query. Use up and down cursor keys to choose from the command history (see Command History below), submit '?' or 'help' to show this display, submit 'l' to see a list of stored queries (see Saved queries below) or submit 'quit', 'exit' or nothing at all, '', to close the entry area and return to the previous display.
Find items where the summary includes a match for "waldo":
query: includes summary waldo
Precede a command with ~ to negate it. E.g., find
reminders where the summary does not include a match for
"waldo":
query: ~includes summary waldo
To enter a list of values for "arg", simply separate the components with spaces. E.g.,
query: includes summary d waldo
would return items in which either the summary or d (@d description) contains a match for "waldo". Similarly
query: all t blue green
would return items with both blue and green tags or
query: any t blue green
would return items with either a blue or a green tag. As a last example
query: one itemtype - *
would return items in which the item type is either '-' or '*', i.e., either a task or an event.
Conversely, to enter a regex with a space and avoid its being interpreted as a list, replace the space with '\s'. E.g.,
query: includes i john\sdoe
would return items with '@i' (index) entries such as "John Doe/...".
Note: in the world of regular expressions '\s' matches any white space character, including a space.
Components can be joined the using "or" or "and". E.g., find reminders where the summary entry contains a match for "waldo" but the @d (description) entry does not:
query: includes summary waldo and ~includes d waldo
Queries, by default, search the items table in the etm database. You can preceed any query with 'a ' (the letter 'a' followed by a space), to search the archive table instead. E.g.,
query: a includes summary waldo or includes d waldo
will search the archive table for reminders with matches for 'waldo' in the summary or in the description.
Queries beginning with 'a ' are, in fact, the only way to see archived items from within etm itself.
Queries can not only locate reminders but also update them. The update commands act on items returned by a query. E.g., this query
query: includes i john\sdoe | replace i john\sdoe
Jane\sDoe
can be regarded as taking the reminders whose index entry, 'i', includes a match for 'john doe' and feeding them to the 'replace' command which then takes the index entry of each reminder and replaces each match for 'john doe' with 'Jane Doe'.
All of the update commands work the same way: a query that returns a list of reminders is followed by a pipe symbol surrounded by spaces, ' | ', and an update command with its arguments. Here is the complete list of these update commands:
-
archive: if the items table is active, move the reminders from the items table to the archive table, else vice versa
-
remove: remove the reminders from the database
-
replace field RGX VAL: in the value of 'field', replace matches for RGX with VAL. If the value of 'field' is a list, do this for each element of the list. Remember to replace spaces in in both RGX and VAL with '\s'
-
delete field: if the reminder has an entry for 'field', delete the entry
-
set field VAL: set the value of 'field' to VAL overriding the current value if it exists
-
provide field VAL: set the value of 'field' to VAL if there is no existing entry for 'field'
-
attach field VAL: if the value of 'field' is intended to be a list and if VAL is not in this list, then add VAL to the list, creating the entry if necessary
-
detach field VAL: if the value of 'field' is a list and this list contains VAL, then remove VAL from the list
The recommended workflow for updating reminders is first to perfect the query to be certain that it lists just the items you want to update. Then press 'q' and the 'up' cursor key to restore the previous query, add ' | ' and the update command you want with its arguments.
WARNING: Since the results may not be reversible, consider backing up your 'etm.json' database before using update commands. This simple query, e.g., would PERMANENTLY DELETE ALL YOUR REMINDERS:
query exists itemtype | remove
Return a formatted, heirarchial display of items. Both the format and the items displayed are determined by the type of the query and the arguments provided. Since these queries can group and sort by date/times, these queries must begin by specifying which of the possible datetimes to use. There are four types of datetime specifications:
- u: sort and group by datetimes in '@u' (used time) entries. Also report aggregates of times spent in these entries. Only items with '@u' entries will be reported.
- s: sort and group by datetimes in '@f' entries in finished tasks and otherwise by '@s' entries. Only items with '@f' or '@s' entries will be reported.
- c: sort and group by the 'created' datetime. All items will be reported.
- m: sort and group by the 'modified' datetime if given else by the 'created' datetime. All items will be reported.
Complex queries follow the datetime specifier with a required group/sort specification consisting of a semicolon separated list with at least one of the following components:
-
index specification such as i, i[1:2] or i[1:]
E.g. for an item with index entry '@i A/B/C': i = ['A','B','C'] i[0] = 'A' i[1] = 'B' i[2] = 'C' i[3] => error, list index out of range i[0:] = ['A','B','C'] i[:1] = ['A'] i[1:] = ['B','C'] i[1:2] = ['B'] i[:2] = ['A','B'] i[2:] = ['C'] i[3:4] = i[3:] = []
Note: using slices such as i[1:2] rather than i[1] avoids 'list index out of range errors' for index entries missing the indicated position and is strongly recommended.
When an index specification returns an empty list, '
' is used for the missing entry. Items without an '@i' entry are given a default entry of '' and included by default. Include 'exists i' in '-q' (discussed below) to overrule this default. -
field specification: l: location c: calendar
Note: items without the specified field are given a default entry of '~' and included by default. Include 'exists l' or 'exists c' in '-q' (discussed below) to overrule these defaults.
-
date specification:
- year:
- YY: 2-digit year
- YYYY: 4-digit year
- month:
- M: month: 1 - 12
- MM: month: 01 - 12
- MMM: locale abbreviated month name: Jan - Dec
- MMMM: locale month name: January - December
- week: (examples based on 2020 iso week number 3):
- W: week number: 3
- WW: month days interval for week: Jan 13 - 19
- WWW: interval and year: Jan 13 - 19, 2020
- WWWW: interval, year and week number: Jan 13 - 19, 2020 #3
- WWWWW: interval, year and week number: January 13 - 19, 2020 #3
- day:
- D: month day: 1 - 31
- DD: month day: 01 - 31
- ddd: locale abbreviated week day: Mon - Sun
- dddd: locale week day: Monday - Sunday
- year:
Note: when a date specification is given, the datetime used depends upon the report type.
- u: the value of the datetime component of the @u entry. Items without @u entries are omitted.
- s: the value of @f when it exists and, otherwise, the value of @s. Items lacking both @f and @s entries are omitted.
- c: the created datetime.
- m: the modified datetime if it exists, else the created datetime.
E.g.
query: u i[:1]; MMM YYYY; i[1:]; ddd D
would create a usedtime query grouped (and sorted) by the first component of the index entry, the month and year, the remaining components of the index entry and finally the month day.
Sorting note: Specifications using weeks are all sorted and grouped by by (YYYY, W). Specifications involving months are all sorted by (YYYY, M). Specifications involving days are all sorted by (D).
The group/sort specification can be followed, optionally, by any of the following:
-b begin date/datetime: omit items with earlier datetimes
-e end date/datetime: omit items with later datetimes
-q query: exclude items not satisfying this simple query. Anything that could be used in a simple query described above could be used here. E.g., "-q exists f" would display only items with an "@f" entry, i.e., finished tasks. Similarly "-q equals itemtype - and ~exists f" would limit the display to unfinished tasks.
-a append: append the contents of this comma separated list of @key characters to the formatted output. E.g., "-a d, l" would append the item description and location to the display of each item.
Note: -b and -e accept shortcuts:
- daybeg: 12am on the current day
- dayend: 12am on the following day - 1 second
- weekbeg: 12am on Monday of the current week
- weekend: 12am on Monday of the following week - 1 second
- monthbeg: 12am on the 1st of the current month
- monthend: 12am on the 1st of the following month - 1 second
- prevmonthbeg: 12am on the 1st of the previous month
- prevmonthend: 12am on the 1st of the current month - 1 second
and can be combined with period strings using w (week), d (day), h (hour) and m (minute). E.g.:
weekbeg - 1w(the beginning of the previous week)
Any query entered at the 'query:' prompt and submitted by pressing 'Enter' is added to the command history. These queries are kept as long as 'etm' is running and can be accessed using the up and down cursor keys in the query field. This means you can enter a query, check the result, press 'q' to reopen the query prompt, press the up cursor and you will have your previous query ready to modify and submit again. It is also possible to keep a permanent list of queries accessible by shortcuts. See 'Saved Queries' below.
Commonly used queries can be specified in the "queries" section of cfg.yaml in your etm home directory along with shortcuts for their use. These saved queries support positional replacements. E.g. with
queries:
...
find: includes summary d {}
the expectation would be that 'find' will be followed by a single argument to replace the '{}'. E.g.,
query: find waldo
Entering this at the query prompt would create and then, without further input, execute the query
includes summary d waldo
thus identifying all items in which either the summary or the description (d) contains 'waldo'.
Arguments provided to saved queries are separated by spaces. This means that
query: find John Smith
would raise an error because two arguments, 'John' and 'Smith', have been provided but there is only one '{}' placeholder. To fix this, replace each unwanted space with an '\s'. E.g.,
query: find John\sSmith
As another example consider 's-d' (summary but not description):
queries:
...
s-d: includes summary {0} and ~includes d {0}
Here the '{0}' placeholders mean that only one argument is expected and it will be used to replace both of the placeholders. This entry
query: s-d waldo
would then expand to
includes summary waldo and ~includes d waldo
which identifies items with 'waldo' in the summary but not in the description.
As a final example, suppose you use one of the tags, 'unbilled', 'billed' or 'paid', to track billing and you want to find items that have an @i entry that contains a client name that you will specify and have @t entries that contain a tag that you will also specify. Consider this specification for 'status':
queries:
...
status: includes i {} and any t {}
with '{}' placeholders for the client and the tag. Then
query: status IOU paid
would expand to
includes i IOU and any t paid
which would identify items for the client 'IOU' which have been tagged 'paid'. Similarly
query: status IOU unbilled
would identify items for the same client that have been tagged 'unbilled' instead of 'paid'.
Saved queries need not, of course, take arguments. With
queries:
...
unbilled: exists u and ~any t billed paid
the query
query: unbilled
would identify all items with an @u (used time) entry and thus presumably billable but without either a 'billed' or 'paid' tag.
Note: To see a list of all your saved queries, just enter 'l' (lower case 'L') at the query prompt.
query: l
While the views differ in many respects, they also share some common aspects:
- Press
Nin any view to create a new item. - Select a reminder by clicking on it or by using the up and down cursor keys to move the cursor to the line displaying the reminder.
- With a reminder selected, press
returnto toggle displaying the details. - Movement
- Press page up or page down to shift the display a page at a time.
- Press “l” (lower case L) and enter a number to move the cursor to a particular line number.
- In the weekly views a), b) and c), press “j” and enter a date to display the week containing that date.
- In the dated views a), b), c), u), U) and y), press the right or left cursor keys to go to the next or previous period, respectively, and the space bar to return to the current period.
- Search.
- Press “/“ (or "?") and enter an expression to search the view forward (or backward) for a row whose content contains a case-insensitive match for the expression.
- While entering the search expression, push the
upordowncursor keys to change the direction of search. - After entering the search expression, press “n” to search (cyclically) for other matches in the direction specified.
- Once a search is initiated, it remains active in all views with matches highlighted. To remove the highlighting, search for something unlikely to be matched, e.g., 3 consecutive commas.
The files current.txt and next.txt in your etm home directory are created by etm but not displayed within etm itself. Whether or not these files are created depends on two settings in your cfg.yaml:
keep_current: non-negative integers forweeksandwidth. Ifweeksis positive, the agenda for that integer number of weeks starting with the current week will written tocurrent.txtand updated whenever necessary. Similarly, the 'do next' view will be written to "next.txt" and 'goals' view will be written to "goals.txt". In all cases, the output will be wrapped to fitwidth. A width of 46, for example, works well for an iPhone in portrait mode.
By creating links to these files in, e.g., a GoogleDrive folder, you can have access to your current schedule, tasks and goals on your mobile device.
Here is a screen shot from an iPhone of an illustrative current.txt:
Pressing F1 toggles the etm menu display - opening it if it is closed and closing it if it is open. There are four menu tabs labeled etm, view, editor and selected with the options listed below:
etm
F1) activate/close menu
F2) about etm
F3) system info
F4) check for updates
F5) import file
F6) datetime calculator
F7) configuration settings
F8) help
---
^q) quit
view
a) agenda
b) busy
c) completed
d) do next
e) effort
f) forthcoming
g) goals
h) history
i) index
j) journal
k) konnected
l) location
m) timers
o) occurrences
p) pinned
q) query
r) review
s) scheduled alerts for today
t) tags
u) used time
U) used summary
v) refresh views to fit resized terminal
y) yearly calendar
^c) copy active view to clipboard
move
space|home) go to today in a), b) and c)
end) prompt for and goto date in a), b), c), u), U) and y)
right) next in a), b), c), u), U) and y)
left) previous in a), b), c), u), U) and y)
---
/|?) initiate forward|backwards search
n|N) search next|previous incrementally
,,) clear search
^l) prompt for and jump to line number
^p) jump to next pinned item
edit
+) add new item
J) edit today's journal entry
---
^g) test goto link
^r) show repetitions
^s) save changes & close
^z) discard changes and close
selected
enter) toggle showing details
E) edit
C) edit copy
D) delete
F) finish
P) toggle pin
R) reschedule
S) schedule new
G) open goto link
^a) toggle goal active/inactive
^e) end goal
^h) show completion history
^r) show repetitions
^u) update last modified
^x) toggle archived status
--- konnected view
k) toggle showing konnections
timers
m) show timer view
--- for the selected reminder
T) change timer to next state
TR) record usedtime and end timer or add usedtime
TD) delete timer
--- ignores selection
TT) toggle paused/running for active timer
^t) start quick timer
As with the other menus, each entry is preceeded by its shortcut, e.g., F2 for about etm or ^q (control and q simultaneously) to quit.
Many of the entries are obvious but a few deserve comment.
-
import file supports importing three different file types. A file ending with
.jsonis expected to be one exported from etm 3.2.x. A file ending with.textis expected to be a text file with lines corresponding to etm 4.x reminders. A file ending with.icsis expected to be a file in iCalendar format.If a file named
inbasket.textexists in the root of the etmdir directory, it will be offered as the default for importing. When etm detects the presence of this file, a circled-i symbol, 𝕚, will be displayed in the right-hand end of the status bar.Any file located in the root of the etmdir will automatically be removed after it is imported to avoid duplications.
-
datetime calculator processes an expression of the form
x [+-] ywhere x is a datetime and y is either a timeperiod with+or a datetime or a timeperiod with-. As an example, suppose you have the arrival time in Paris of a flight and the departure time from Raleigh/Durham and you would like to determine the flight time. Entering7:45a 4/7 Europe/Paris - 5:30p 4/6 US/Easternyields
8 hours 15 minutes -
configuration settings opens the file
cfg.yamlusing the default text editor for your operating system. Note that any changes you make to this file will not take effect until you close and reopen etm. -
help opens the etm documentation on google pages using the default web browser for your system. This is the most user friendly source for the documentation because it begins with a table of contents whose elements are active links to the relevant sections. It is updated with every commit so it is always the most recent version available.
The view menu provides access to all the etm views with the shortcut keys for these views. E.g., press a to open agenda view.
The start quick timer option creates a new, inbox reminder with the current datetime as the subject, associates a timer with reminder and starts the timer. If another timer is active, it will be paused if necessary and made inactive. Subsequent invocations repeat this process.
The entries here are pretty obvious and the views themselves are descibed elsewhere.
It is worth noting here that when you are editing an item, ^s (control and s) saves any changes you have made and closes the editor. ^z (control and z), on the other hand, closes the editor without saving any changes but, if there are changes, asks for confirmation that this is what you want.
An options setting, 'vi_mode' determines which keybindings are used in the entry buffer when editing. If 'vi_mode' is true, then vi-style bindings are used and, otherwise, the default emacs-style bindings are used. The status bar describes the current mode, e.g., 'vi: insert' with a '+' appended if the contents have been modified.
Options in the selected menu are only relevant when a reminder has been selected in one of the views.
Several options here deserve comment.
-
delete will prompt for comfirmation and, if the selected item is repeating, for whether to delete only the selected instance or the item itself, i.e., all instances.
-
finish applies only to unfinished tasks and will prompt for a datetime to use in creating an
@fentry for the task with the current datetime as the default. Press -
reschedule will prompt for a datetime. If the reminder is repeating, the provided datetime will replace the datetime of the selected instance. Otherwise it will be used either to replace the current value of
@sor, if there is no@sentry, to create one. -
schedule new will prompt for a datetime and add that instance to any other instances of the reminder.
-
open goto will use the system default application to open the file path or url specified in the selected reminders
@gentry. Items with goto links are displayed with a 'g' in the flags column of normal views. -
toggle pin toggles the pin status of an item between off and on. Items for which the pin status are displayed with a 'p', in the flags column of normal views and are also displayed in pinned view.
-
show repetitions pops up a display showing illustrative repetitions if the item is repeating.
-
toggle archived status moves the selected reminder from the items table if it is active to the archive table and vice versa if the archive table is active.
-
change timer to next state.
-
These are the states for the timer associated with a reminder and the relevant status of any other timers:
- n (no timer is associated with this reminder)
- n-: no other timer is active
- n+: another timer is active
- i (a timer is associated with this reminder and it is inactive)
- i-: no other timer is active
- i+: another timer is active
- r-: running (a timer is associated with this reminder and it is running - there cannot be another active timer)
- p-: paused (a timer is associated with this reminder and it is paused - there cannot be another active timer)
- n (no timer is associated with this reminder)
-
These are the "next" state transitions associated with this action:
- n+ ⇒ i+
- n- ⇒ p-
- i- ⇒ r-
- i+ ⇒ r-
- r- ⇒ p-
- p- ⇒ r-
-
Here are the details:
- If no timer is currently associated with the reminder, one will be created. If another timer is active, the new timer will be inactive, otherwise it will be active and paused.
- If an inactive timer is already associated with the reminder. Its state will be changed to running. If another timer is active, that timer will be changed to inactive and, if running, its elapsed time will be incremented by the period it has been running.
- If an active timer is already associated with the reminder, its state will be toggled between paused and running. With a transition from running to paused, the elapsed time for the timer in increased by the period since the timer's state changed to running.
Additionally, if there is an active timer, its state, either r (running) or p (paused), is displayed in the etm status bar together with the relevant time period, either the total elapsed time or how long the timer has been paused. If there are inactive timers with non-zero elapsed times, the total of such elapsed times will also be reported in the status bar. E.g., this display in the status bar
r:4m + i:13mwould mean that the active timer is running with 4 minutes of unrecorded elapsed time and that there is an additional 13 minutes of unrecorded elapsed time in inactive timers.
-
-
record used time with a reminder selected, will:
- If a timer is not currently associated with the reminder, prompt for a timeperiod and ending time to use in adding a usedtime entry to the reminder.
- If a timer is currently associated with the reminder, use its elapsed time and the last moment it was running as the defaults in the prompt for a usedtime timeperiod and ending time. If the entry is saved, the elapsed time for the timer will be reset to zero and, additionally, if the timer is currently running, its status will be changed to paused.
The easiest way to install etm for personal use is to use pip:
$ python3 -m pip install -U etm-dgraham
(This same command can be used to update etm when a new version is released.) This will install etm with all the needed python supporting modules. You can then start etm with
$ etm <path to home>
See Home directory for details about <path to home>.
FIXME
Installing etm in an isolated or virtual environment (sandbox) is only slightly more complicated. Begin by using pip to install pipx:
$ python3 -m pip install -U pipx
Now run:
$ pipx ensurepath
to ensure that directories necessary for pipx operation are in your PATH environment variable and finally to install etm itself:
$ pipx install etm-dgraham
(To upgrade etm when a new version becomes available, simply replace "install" in this command with "upgrade".) You can then start etm as before with
$ etm <path to home>
Details about <path to home> are in Home directory.
If your system allows you to run sudo and you want general access system wide, then you could instead install etm using
$ sudo -H python3 -m pip install -U etm-dgraham
This would put both etm and etm+ in your path (in the bin directory for python3).
Notes:
-
This same command would be used to update etm to the latest version.
-
You may or may not need the '-H' argument for sudo. Here is the relevant section from the sudo man page:
-H, --set-home Request that the security policy set the HOME environment variable to the home directory specified by the target user's password database entry. Depending on the policy, this may be the default behavior. -
Invoking pip through python in this way forces the use of the pip that belongs to python3.
You can then open any terminal and start etm using
$ etm <path to home>
See home directory for details about <path to home>.
The suggested terminal size for etm is 70 (columns) by 32 or more (rows). The default color scheme is best with a dark terminal background. A scheme better suited to light backgrounds can be set using style: light in cfg.yaml in your home directory. Some of the etm display may not be visible unless style is set correctly for your display.
The size of the terminal is used when etm starts to set various display options so changing the terminal size, especially reducing the width, is best avoided once etm is running.
Before you start etm, think about where you would like to keep your personal data and configuration files. This will be your etm home directory. The default is to use whatever directory you're in when you start etm as your etm home directory. If you start etm in your virtual environment directory then the default will be to use that as your home directory as well. If this is not what you want, you can just give the path for whatever directory you would like to use when you start etm.
$ etm <path to home>
Finally, if there is an environmental variable, ETMHOME, set to this path then you can just enter
$ etm
and etm will use ETMHOME as its home directory.
Home directory considerations:
- If more than one person will be using etm on the same computer, you might want to have different home directories for each user.
- If you want to use etm on more than one computer and use Dropbox, you might want to use
~/Dropbox/etmto have access on each of your computers. - If you want to separate personal and professional reminders, you could use different home directories for each. You can run two instances of etm simultaneously, one for each directory, and have access to both at the same time.
- You can have multiple instances of etm running with the same home directory, provided that you treat all instances save one as read only, i.e., only make changes in one instance.
Whatever home directory you choose, running etm for the first time will add the following to that directory.
etm home directory/
backups/
logs/
cfg.yaml
etm.json
Here cfg.yaml is your user configuration file and etm.json contains all your etm reminders. The folders backups/ contains the 7 most recent daily backups of your etm.json and cfg.yaml files. The folder logs contains the current etm.log file and the 7 most recent daily backups. Note that backup files are only created when the relevant file has been modified since the last backup.
The file cfg.yaml can be edited and the options are documented in the file.
See configuration for details.
For tracking time spent, etm supports the use of one or more timers. Each timer is associated with a particular reminder and, if a timer is recorded, a used time entry will be added to the associated reminder using this format:
@u <time spent>: <datetime recorded>
The timer itself records seconds, but the used time entry for <time spent> depends upon the usedtime_minutes setting in cfg.yaml as follows:
- 0: time is recorded in seconds after rounding to the nearest second
- 1: time is recorded in minutes after rounding off to the nearest minute, e.g., 1m29s => 1m; 1m30s => 2m
- 6: time is rounded up to the next one-tenth of an hour for reporting but recorded in minutes
- 12: time is rounded up to the next two-tenths of an hour for reporting but recorded in minutes
- 30: time is rounded up to the next half hour for reporting but recorded in minutes
- 60: time is rounded up to the next hour for reporting but recorded in minutes
The Used Time Views show aggregations of these reported times by month and index entry. Any rounding up is done before aggregating.
Used time entries can be recorded directly by editing the relevant reminder and adding one or more @u entries. It is also possible to use etm to create timers attached to particular reminders and control them with hotkeys.
- T: with a reminder selected
- If a timer is not already associated with this reminder, then create a new timer and associate it with this reminder
- if another timer is active, make this timer inactive
- otherwise make this timer active and paused
- If a timer is already associated with this reminder
- if the timer is inactive, make it active and running
- otherwise toggle the state of the timer between paused and running
- If a timer is not already associated with this reminder, then create a new timer and associate it with this reminder
- TR: if a reminder is selected with an associated timer
- open a dialog to record a used time entry with the current value of the timer and the current datetime
- if, after possible editing, recording is confirmed then add the used time entry and delete the timer
- TD: if a reminder is selected with an associated timer
- open a dialog to confirm deleting the timer without recording the used time
- if deletion is confirmed then delete the timer
- TT: if there is an active timer
- toggle the paused/running state for the active timer. Note that the reminder associated with the active timer need not be selected.
- Note that if there are one or more timers, exactly one of them will be the active timer, i.e., either running or paused. The others, if any, will be inactive.
Timer View, bound to m, provides a convenient way of manipulating multiple timers. It lists each existing timer with the active timer first and followed by the other timers in the order of most recently active. Pausing/running the active timer can be done from any view by pressing TT. To switch to another timer, change to timer view, press TT if necessary to pause the active timer, select the timer you want to start and press 'T' to change its state from 'inactive' to 'running'. It will move to the top of the list and the other timers will move down by one row.
When there is an active timer, either running or paused, its status will be displayed in a second line of the status bar. E.g., `6.3m r⌁10:23a' would mean that the active timer has been running since 10:23am today and has a total of 6.3m of elapsed time. If there are other, inactive timers with positive elapsed times then the total of these times would be displayed in the first line of the status bar.
If you are new to etm, you might find it very useful to install the lorem examples. If you press F5, enter 'lorem' at the prompt and press return, etm will generate a series of reminders all of which are tagged 'lorem'. These fall within a three month period including the month in which they were created as well as the previous and subsequent months. The examples are designed to illustrate nearly all of the etm views and features. You can play around with the examples as long as you wish and then remove them all at once by pressing q to open query view, entering the query 'any t lorem | remove' and pressing return.
These examples are named for and depend upon the python package lorem that can generate random words, phrases, sentences and paragraphs in 'lorem ipsum' text. E.g., "Lorem ipsum dolor sit amet, consectetur adipiscing elit ...". This is "a placeholder text commonly used to demonstrate the visual form of a document or a typeface without relying on meaningful content."
An added bonus of setting ETMHOME to the path of your home directory is the possibility of using the etm+ shortcut for creating reminders. E.g., entering
$ etm+ '* lunch with Peter @s fri 12p'
would append the line * lunch with Peter @s fri 12p to the file inbasket.textin ETMHOME, creating the file if necessary. etm+ also accepts input piped to it so that
$ echo '* lunch with Peter @s fri 12p' | etm+
would produce exactly the same result.
Finally, if {T} is included, it will be replaced with a time stamp corresponding to the moment the script was invoked. E.g.,
$ echo '% got the test result at {T}' | etm+
would append something like % got the test result at 2022-12-07 9:13:55 EST.
Important : The single quotes are necessary to keep the shell from expanding the "*" into the names of all the files in the current working directory and other such mischief.
etm checks once every minute for the presence of a file named inbasket.textin ETMHOME and, if found, will display an inbasket character, ⓘ , at the right end of its status bar reminding you that inbasket items are available for importing. Just press F5 in etm to import the reminders from this file and, on successful completion, automatically remove the file.
Note finally that etm+ will accept quick notes which are not themselves valid etm reminders such as
$ etm+ '123 456-7890 Peter'
This would result in the valid reminder
! 123 456-7890 Peter @t etm+
being appended to inbasket.text - note the added type character, ! and the tag, @t etm+.
The addition of the typechar '!' means that after importing the reminder will appear as an 'inbox' item. These are highlighted in the list for the current day in agenda view, reminding you that they require futher attention. You can thus make quick notes without much thought and know that you will automatically be reminded to sort them out later. An added bonus is that when editing such entries in etm itself, all its completion, fuzzy parsing and verification features are available.
To remove etm run
$ pip uninstall etm-dgraham
This will remove etm from the python site-packages directory and the etm and etm+ executables from the python bin directory. Then remove any etm home directories that you have created.
Use pipx instead of pip:
$ pipx uninstall etm-dgraham
You can now remove any home directories you may have created.
To remove etm installed into, say, python3.7, run
$ sudo -H pip uninstall etm-dgraham
This will remove etm from the python site-packages directory and the etm and etm+ executables from the python bin directory. Then remove any etm home directories that you have created.
Type character: *
An event is something that happens at a particular date or datetime without any action from the user. Christmas, for example, is an event that happens whether or not the user does anything about it.
- The
@sentry is required and can be specified either as a date or as a datetime. It is interpreted as the scheduled date or datetime at which the event begins. - If
@sis a date, the event is regarded as an occasion or all-day event. Such occasions are displayed first on the relevant date. - If
@sis a datetime, an@eentry is allowed and is interpreted as the extent or duration of the event - the end of the event is then given implicitly by starting datetime plus the extent and this period is treated as busy time.
Corresponds to VEVENT in the vcalendar specification.
Type character: -
A task is something that requires action from the user and lasts, so to speak, until the task is completed and marked finished. Filing a tax return, for example, is a task.
-
The
@sentry is optional and, if given, is interpreted as the date or datetime at which the task is scheduled to be started. -
The
@eentry is also optional and specifies the time period scheduled for completion of the task. The default value for@eis0m(zero minutes) . -
Tasks with an
@sdatetime entry are regarded as past due after@s + @eand are displayed in Agenda View on the relevant dates from@sto@s + @e. -
When
@sis a date entry, the task is regarded as past due after the date corresponding to@s + @eand is displayed in Agenda View on the relevant dates after all items with datetimes. -
Tasks that are past due are also displayed in Agenda View on the current date using the type character
<with an indication of the number of days that the task is past due. -
Tasks without an
@sentry are to be completed when possible and are sometimes called todos. They are regarded as next items in the Getting Things Done terminology and are displayed in Do Next view grouped by @l (location/context). -
Tasks with an
@r(repeat) or an@+entry can have an@o(overdue) setting.-
@o k: keep. Whenever completed, the next instance is due at the datetime specified in the recurrance rule even if that datetime has already passed. E.g. minutes from a monthly meeting to be made on the 1st of the month are due for each prior month in which they have not been made. With this option, many instances can be past due. By default, a completion applies to the oldest, past due one, though other instances can be selected. The default when no@oentry is given is@o k. -
@o r: reset. Whenever completed, the next instance is due at the first datetime that falls after the current datetime. E.g., getting a haircut every 14 days is due 14 days after the last haircut. With this option, at most one instance can be past due. -
@o s: skip. Like 'keep' with the addition that past due instances are ignored. E.g., taking out the trash every Monday morning for pickup is due every Monday morning but, if a Monday passes without taking out the trash, the instance is better regarded as irrelevant than past due. With this option, an instance can never be past due.Furthermore, if the options setting
limit_skip_displaywere true, then only the first instance of such a task would be displayed in agenda view. E.g., with thelimit_skip_displaysetting true, then for the task- meds @s +0d @r d &h 8,14,20 @o sagenda view at 10am today would only display the first, 2pm (14h) instance of this task. If, on the other hand, this setting were false, then agenda view would display not only the 2pm instance but also the 8pm (20h) instances and all three instances on every future date.
-
-
Jobs
-
Tasks, both with and without @s entries can have component jobs using @j entries.
-
For tasks with an @s entry, jobs can have an &s entry to set the starting date/datetime for the job. It is entered as a timeperiod relative to the starting datetime for the task. The default for
&sis0m(zero minutes). E.g., a job with&s 1dwould have a starting datetime one day after the starting datetime specified in@s. -
For tasks with an @s entry, jobs can also have &a, alert, and &b, beginning soon, notices. The entry for &a is given as a time period relative to &s (+ before or - after) and the entry for &b is a positive integer number of days before the scheduled date/time to begin displaying "beginning soon" notices. The entry for @s in the task becomes the default for &s in each job. E.g., with
- beginning soon example @s 1/30/2018 @j job A &s 5d &b 10 @j job B &b 5Beginning soon notices would begin on Jan 15 for job A (due Jan 25) and on January 25 for job B (due Jan 30).
-
Prerequisites
-
Automatically assigned. Here it is supposed that jobs must be completed sequentially in the order in which they are listed. E.g., with
- automatically assigned @j job A @j job B @j job C @j job Djob Ahas no prerequisites but is a prerequisite forjob Bwhich, in turn, is a prerequisite forjob Cwhich, finally, is a prerequisite forjob D.Auto assignment is done when the task is first saved by assigning 'a', 'b', 'c', ... as ids for the successive jobs with 'a' as a prerequisite for 'b', 'b' for 'c' and so forth. The task is then saved as
- automatically assigned @j job A &i a @j job B &i b &p a @j job C &i c &p b @j job D &i d &p cand thereafter treated as if the ids and prerequisites had been manually assigned. Note that at most 26 jobs are possible with auto assignment.
Once ids and prerequisites have been assigned, it is sometimes useful to be able to add a job here or there or change the order of existing jobs and have the ids and prerequisites generated again. To do this simply remove the
&iand&pentries from the first job and save the task - all job ids and preqrequisites will automatically be reassigned. -
Manually assigned. Job prequisites can also be assigned manually using entries for
&i(id) and&p, (comma separated list of ids of immediate prequisites). E.g., with- manually assigned @j job a &i a @j job b &i b &p a @j job c &i c &p a @j job d &i d &p b, cjob ahas no prequisites but is a prerequisite for bothjob bandjob cwhich are both prerequisites forjob d. The order in which the jobs are listed is irrelevant in this case.
-
-
Tasks with jobs are displayed by job using a combination of the task and job summaries with a type character indicating the status of the job. E.g.,
✓ manually assigned [2/1/1]: job a - manually assigned [2/1/1]: job b - manually assigned [2/1/1]: job c + manually assigned [2/1/1]: job dwould indicate that
job ais finished,job bandjob care available (have no unfinished prerequistites) and thatjob dis waiting (has one or more unfinished prerequisties). The status indicator in square brackets indicates the numbers of available, waiting and finished jobs in the task, respectively.
-
-
An entry for
@ecan be given with or without an@sentry and is interpreted as the estimated time required to complete the task. -
When a job is finished, the "done" datetime is recorded in an
&fentry in the job. When the last job in a task is finished or when a task without jobs is finished a similar entry in the task itself using@f done. If there are jobs, then the&fentries are removed from the jobs. -
Another step is taken for repeating tasks with as yet unfinished future repetitions. When the task or last job in the current repetition is completed, the
@sentry is updated using the setting for@oto show the next due datetime and the@fentry is removed and appended to the list of completions in@h. A user configuration setting determines the number of most recent completion records retained for repeating tasks with 3 as the default. -
When the last instance of a repeating task is finished,
@fwill contain the datetime of the last completion and@hthe list of prior completions. -
A task, repeating or not, will have an
@fentry if and only if the task has been completed.
Corresponds to VTODO in the vcalendar specification.
Type character: %
A record of something that the user wants to remember. The userid and password for a website would be an example. A journal entry for vacation day is another example.
- The
@sis optional and, if given, is interpreted as the datetime to which the journal entry applies. - Journal entries without @s entries might be used to record personal information such as account numbers, recipies or other such information not associated with a particular datetime. They are displayed in the Journal view
- Journal entries with @s entries associate the entry with the datetime given by @s. A vacation log entry, for example, might record the highlights of the day given by @s. They are displayed in Agenda view as well as Journal view.
- While Journal entries do not support repetition using
@rentries, they do support the use of@+entries to add additional dates or datetimes to that provided by the@sentry.
Corresponds to VJOURNAL in the vcalendar specification.
Type character: ~
The goal itemtype is intended to support pursuing S.M.A.R.T. goals (Specific, Measurable, Achievable, Relevant, Timed) in etm. Here is an example of a goal as it would be entered:
~ interval training @s 2024/4/22 @q 3
-
It is a goal because of the
~type character. -
Because I have a custom interval setting on my exercise bike, "interval training" is specific and measurable. It is also achievable and relevant for me.
-
The
@sentry is required and times the goal to begin on Monday, April 22, 2024. Whatever date is entered will be automatically converted to the Monday of the corresponding week. -
The
@qentry is also required and sets to quota for this goal to 3 times per week, repeating indefinitely. Had the quota instead been, say,@q 3, 5then the goal would have been 3 times per week repeated for 5 weeks. -
If this goal were selected in etm on, say, Wednesday, April 24 and "F" were pressed, then etm would add an
@h 2024:17 1(history of completions) entry to indicate 1 completion of the goal for the week of 2024:17. Pressing "F" again in the same week with this goal selected would change this entry to@h 2024:17 2. As one last example, pressing "F" with the goal selected sometime during the week of 2024:18 would leave the recorded entry as~ interval training @s 2024/4/29 @q 3 @h 2024:17 2, 2024:18 1
Type character: !
An inbox item can be regarded as a task that is always due on the current date. E.g., you have created an event to remind you of a lunch meeting but need to confirm the time. Just record it using ! instead of * and the entry will appear highlighted in the agenda view on the current date until you confirm the scheduled time.
Inbox items are also useful when you have an idea but not enough time to think about it. Create an inbox entry with just enough information in the summary to remind you of the idea. Make a habit at the end of the day of checking inbox items. The idea is not necessarily to complete them but to change those that can’t be finished quickly to, say, undated tasks with appropriate @l entries and enough detail in the summaries and the @d descriptions so that you will have all the information you need to act on them when the time comes.
Corresponds to VTODO in the vcalendar specification.
These type characters are generated automatically by etm to display the status of reminders.
Type character: >
For unfinished tasks and other items with @b entries, when the scheduled date given by @s is within @b days of the current date, a warning that the item is beginning soon appears on the current date together with the item summary and the number of days remaining until the current date.
Type character: <
When a task is past due, a warning that the task is past due appears on the current date together with the item summary and the number of days that the task is past due.
Type character: +
When a task job has one or more unfinished prerequisites, it is displayed using + rather than -.
Type character: ✓
When a task or job is finished, it is displayed in the completed view on the date that it was finished using ✓ rather than -.
Notes:
-
The term "list" means a comma and space separated list of elements, e.g.,
@+ 2p Thu, 9p Mon, 11a Wed
-
Options displayed with an asterick can be used more than once, e.g.,
@a 1h, 30m: t, v @a 1d: e
@n joe: [email protected] @n john: [email protected]
@t red @t green
@ followed by a character from the list below and a value appropriate to the key is used to apply attributes to an item. E.g.,
@s mon 9a
would specify the the scheduled datetime for the item is 9am on the Monday following the current date.
- @+: include. list of datetimes to include
- @-: exclude. list of datetimes to exclude
- @a*: alert. list of + (before) or - (after) periods: list of commands
- @b: beginby. integer (number of days before)
- @c: calendar. string
- @d: description. string
- @e: extent. timeperiod
- @f: finished. datetime
- @g: goto. string (url or filepath)
- @h: history. (for repeating tasks, a list of the most recent completion datetimes)
- @i: index. forward slash delimited string. E.g., client/project/activity
- @j*: job summary. string, optionally followed by job &key entries
- @k*: doc_id. connect this reminder to the one corresponding to doc_id.
- @l: location (aka context). forward slash delimited string. E.g., home/maintenance
- @m: mask. string stored in obfuscated form
- @n*: attendee. string using "[name:] address" format. If "address" begins with exactly 10 digits followed by an "@" it is treated as a mobile phone number. Otherwise it is treated as an email address. The optional "name:" can be used to facilitate autocompletion.
- @o: overdue. character from (r) restart, (s) skip, (k) keep. Defaults to (k) keep.
- @p: priority. integer from 0 (none), 1 (low), 2 (normal), 3 (high), 4 (urgent)
- @r*: repetition frequency, a character from (y)early, (m)onthly, (w)eekly, (d)aily, (h)ourly or mi(n)utely, optionally followed by repetition &key entries
- @s: scheduled date or datetime
- @t*: tag. string
- @u*: usedtime. string using "timeperiod spent: ending datetime" format
- @w: wrap. A pair of before and after timeperiods to extend the busy period for an event, e.g., for travel time to and/or from the location of the event. Use
0mas one of the timeperiods to avoid a wrap in that direction. - @x*: expansion. string
- @z: timezone. string. A timezone specification, such as 'US/Eastern' or 'Europe/Paris' for aware datetimes or 'float', to indicate a naive or floating datetime. Datetime entries in the item are interpreted as belonging to the specified timezone when the entry is saved. The current timezone is the default when @z is not specified. Aware datetimes are converted to UTC (coordinated universal time) when stored and the @z entry, now irrelevant, is discarded.
& followed by a character from one of the lists below. These keys are only used with @j (job) and @r (repetition) entries.
For use with @j:
- &s: scheduled: period relative to @s entry (default 0m) at which job is scheduled to be completed
- &a: alert: list of + (before) or - (after) periods relative to &s: list of cmd names from the users configuration file
- &b: beginby. integer number of days before &s
- &d: description. string
- &e: extent. period
- &f: finished. datetime
- &l: location/context. string
- &m: masked. string stored in obfuscated form
- &i: job unique id. string
- &p: prerequisites. list of ids of immediate prereqs
- &u*: usedtime. string using "timeperiod spent: ending datetime" format
For use with @r:
- &c: count. integer number of repetitions
- &E: easter. number of days before (-), on (0) or after (+) Easter
- &h: hour. list of integers in 0 ... 23
- &i: interval. positive integer to apply to frequency, e.g., with @r m &i 3, repetition would occur every 3 months
- &m: monthday. list of integers 1 ... 31
- &M: month number. list of integers in 1 ... 12
- &n: minute. list of integers in 0 ... 59
- &s: set position: integer
- &u: until. datetime
- &w: weekday. list from SU, MO, ..., SA possibly prepended with a positive or negative integer
- &W: week number. list of integers in 1, ..., 53
-
A link character, 'g', is appended to the flags column of any reminder with an
@ggoto link. Press^gwith such a reminder selected to have the operating system open the link using the default application if the link can be interpreted as a file path or a url. E.g. if the link is a URL, then it would be opened using the default browser. If link can be interpreted as a shell command followed by arguments, then the command would be executed with the arguments. -
An in-basket character, ⓘ , is appended to the right end of the status bar when a file named 'inbasket.text' is found in the etm root directory. This file should contain lines containing etm reminder entries - one on each line. It can be imported using the import file command bound to F5.
-
An update available character, 𝕦, is appended to the right end of the status bar when checking for updates is enabled and a later version of etm is available. Details for enabling checking for updates are in configuration.
-
Alerts and beginbys can be added to any reminder with an
@sscheduled date/time entry. Alerts require a datetime in@s; beginbys also allow a date in@s. -
A beginby is specified by adding
@b nto a reminder wherenis a positive integer and is interpreted as a number of days. A reminder with such an entry will be displayed in agenda view on the current date provided that the current date is no more thanndays before the scheduled date/time of the reminder. Such a warning will appear n days before, n-1 days before and so forth until 1 day before the scheduled date/time of the reminder. The warning displays the type character>, the summary of the reminder and the number of days remaining. -
An alert is specified by adding
@a <list of time periods>: <list of commands>to a reminder. The time periods must be given in the usual etm format, e.g.,1h13mfor one hour and 13 minutes. The commands are single alphabetic characters, e.g.,a,band such. The commands used must either bee(email) ort(text) or be specified in thealertssection of thecfg.yamlfile in your etm home directory. See configuration for details about this file. Basically, it associates a command, such asvwith a shell command to be invoked when an alert that includesvis triggered. E.g., the alert@a 20m: vwould be triggered 20 minutes before the datetime specified in the reminder's
@sentry and at that time the shell command associated withvwould be invoked. Both positive (before) and negative (after) time periods can be used. Thus this entry@a 1d, -1h: v, wwould invoke the shell commands associated with
vandw, one day before and again 1 hour after the datetime specified in the reminder's@sentry. -
Reminders can have more than one
@aalert entries. Different alerts could, for example, be used to trigger their commands at different times. -
With an email,
e, or text alert,t, the item summary is used as the subject and an email or text message is sent to each attendee listed in @n entries. The content of the body of the emails/messages are options that can be set in the user's configuration file. -
Alerts and beginbys are only triggered for unfinished tasks and, when the task is repeating, only for the first unfinished instance. Similarly, past due notices for repeating tasks are only triggered for the first unfinished instance.
-
Events with
@w <before>, <after>wrap entries have 'busy periods' that extend from<before>(a time period) before the beginning of the event until<after>(another time period) after the end of the event. An entry such as@w 30m, 0mcould be used, for example, to block out 30 minutes before a meeting to review your notes or, as another example,@w 30m, 20mto block out 30 minutes before and 20 minutes after an event to allow for travel time to and from the event's location. The additional busy time is displayed in busy view as well as in agenda view where the event* sales meeting @s 22/11/15 3p @e 1h30m @w 30m, 20mwould appear as
~ · · · · · · · · · · · 2:30pm * sales meeting · · · · · · · · · 3-4:30pm ~ · · · · · · · · · · · · · · 4:50pm
-
Daylight savings time using @s and @r. The time specified in @s is respected in the repetitions. E.g., the first five repetitions for
* monthly @s jan 1 2020 9a @r mwould be
┌─────| First 5 repetitions |──────┐ │ │ │ from Wed Jan 1 2020: │ │ Wed Jan 1 2020 9:00am EST │ │ Sat Feb 1 2020 9:00am EST │ │ Sun Mar 1 2020 9:00am EST │ │ Wed Apr 1 2020 9:00am EDT │ │ Fri May 1 2020 9:00am EDT │ │ │ │ < OK > │ └──────────────────────────────────┘Note that all start at 9am even though the first 3 are EST and the last 2 are EDT.
-
Using @s with @r and with @+. Datetimes from @+ are added to the datetimes generated from the @r entry. Note that the datetime from @s will only be included if it matches one generated by the @r entry or by one included in @+. E.g.,
* my event @s 2018-02-15 3p @r d &h 18 @+ 2018-03-02 4pwould repeat daily at 6pm starting Feb 15 and at 4pm on Mar 2, but not at 3pm on Feb 15 which is specified in
@s. -
Using @s with @+ but without @r. Datetimes from @+ are added to @s. E.g.,
* my event @s 2018-02-15 3p @+ 2018-03-02 4pwould repeat at 4pm on Mar 2 and at 3pm on Feb 15 since
@ris not specified. -
Using &c and &u in @r. It is an error in dateutil to specify both &c (count) and &u (until) since providing both would be at best redundant and at worst conflicting.
A distinction between using @c and @u is worth noting and can be illustrated with an example. Suppose an item starts at 10am on a Monday and repeats daily using either count, &c 5, or until, &u fri 10a. Both will create repetitions for 10am on each of the weekdays from Monday through Friday. The distinction arises if you later decide to delete one of the instances, say the one falling on Wednesday, using @-. With count, you would then have instances falling on Monday, Tuesday, Thursday, Friday and Saturday to satisfy the requirement for a count of five instances. With until, you would have only the four instances on Monday, Tuesday, Thursday and Friday to satisfy the requirement that the last instance falls on or before 10am Friday.
-
Christmas (an all day event) [r]epating (y)early on Dec 25.
* Christmas @s 2015/12/25 @r y -
Get a haircut (a task) on the 24th of the current month and then [r]epeatedly at (d)aily [i]ntervals of (14) days and, [o]n completion, (r)estart from the last completion date:
- haircut @s 24 @r d &i 14 @o r -
Reconcile accounts (a task) on the 2nd day of the current month and then [r]epeatedly at (m)onthly intervals on the second day of the month (&m 2) at midnight (&h 0 &n 0). etm will treat midnight as a date rather than a datetime. [o]n completion, (r)restart from the last completion datetime:
- reconcile accounts @s 2 @r m &m 2 &h 0 &n 0 @o r -
Take out trash (at task) on Mondays but if the task becomes [o]verdue, (s)kip the past due reminders.
- Take out trash @s mon @r w @o s -
A sales meeting (an event) [r]epeating m)onthly on [w]eekdays that are either the first or third Tuesdays in the month.
* sales meeting @s tue 9a @e 45m @r m &w 1tu, 3tu -
Good Friday each year 2 days before [E]aster Sunday.
* Good Friday @s 1/1/2015 @r y @E -2 -
Friday tennis at 9:30am in November, December, January and February and at 8am in the other months:
* Friday tennis @s 2019-01-01 6a @e 90m @r m &w fr &M 1, 2, 11, 12 &h 9 &n 30 @r m &w fr &M 3, 4, 5, 6, 7, 8, 9, 10 &h 8 &n 0 -
Payday on the last week day of each month. The &s -1 part of the entry extracts the last (-1) date which is both a weekday and falls within the last three days of the month):
* payday @s 1/1 @r m &w MO, TU, WE, TH, FR &m -1, -2, -3 &s -1
Repeating events or tasks can have an anniversary expression, {XXX}, in the summary that will be replaced by the appropriate ordinal for the anniversary: 1st, 2nd, 3rd, etc. E.g.,
* {XXX} of 60 auto payments due @s 2020-06-01 @r m &c 60
would appear in agenda view
- On July 1 2020
- 1st of 60 auto payments due
- On Aug 1 2020
- 2nd of 60 auto payments due
...
- On May 1 2025
- 59th of 60 auto payments due
- On Jun 1 2025
- 60th of 60 auto payments due
Similarly
* Will's {XXX} birthday @s 1985-08-23 @r y
would appear in agenda view on Aug 23, 2020 as
- Will's 35th birthday
As a final example, newlyweds might want to celebrate anniversaries initially at monthly intervals
* Our {XXX} monthly anniversary @s 2020-06-18 @r m
and then eventually change to yearly celebrations by removing the 'monthly' and changing the 'm' to 'y'.
In addition to monthly and yearly frequencies, d (daily) and w (weekly) are also supported.
When a reminder is 'archived' in etm, it is is moved from the items table in the database to the archive table. Reminders in the archive table can only be viewed by opening query view and then beginning the query with 'a' to use the archive table. All other views display reminders from the items table.
There are two ways to archive a reminder:
- Automatically. If 'archive_after' in the configuration settings is set to a positive integer, then tasks with finished datetimes and events with last datetimes more than this number of years before the current date will be achived automatically at the beginning of each new day. Note that unfinshed tasks, journal entries, inbox reminders and reminders with an @k konnection entry are never automatically archived.
- Manually. Select a reminder and press
^x(control and x) to archive it.
There is only one way to un-archive a reminder. Run a query beginning with 'a' in query view to use the archive table, select a reminder and press ^x. This will un-archive the reminder, i.e., move it back to the items table.
Configuration settings for etm are specified in the file cfg.yaml located in your etm home directory. See installation for the location of this directory. When etm is running, you can press F8 to open this configuration file using your system default editor for yaml (text) files. Note that any changes you make will not become effective until you stop and restart etm.
Here are the options with their default values from that file. The lines beginning with # are comments that describe the settings.
#### begin cfg.yaml ####
etmversion: 5.0.12
# The current version of etm and this file. DO NOT EDIT. This is
# automatically updated when a new version of etm is installed.
ampm: true
# true or false. Use AM/PM format for datetimes if true else
# use 24 hour format. See also the show_minutes setting.
show_minutes: false
# true or false. If true show ":00" in agenda and forthcoming views
# when displaying times with zero minutes else suppress zero minutes
# from being displayed. E.g., "9:00-10:30" if true else "9-10:30".
# When ampm if false and show_minutes is true, hours will be displayed
# with leading zeros applicable.
dayfirst: false
yearfirst: true
# each true or false. Whenever an ambiguous date is parsed, dayfirst
# and yearfirst parameters control how the information is processed
# using this precedence:
# yearfirst: true
# dayfirst: true => YDM
# dayfirst: false => YMD
# yearfirst: false
# dayfirst: true => DMY
# dayfirst: false => MDY
# E.g., with both true, 3/4/5 would be interpreted as May 4, 2003.
# When possible, dates will also be displayed respecting these settings.
# I.e., the year will generally be displayed first when yearfirst is
# true and last otherwise. Similarly, the day will generally be displayed
# before the month when dayfirst is true and after the month otherwise.
beginbusy: 7
# non-negative integer. The number of hours after midnight to begin the
# busy view display of busy times for each day. The display continues
# for 14 hours after the begin_busy hour. E.g. with 'begin_busy: 7' the
# display would show busy times from 7am (7h) until 9pm (21h).
updates_interval: 0
# non-negative integer. If positive, automatically check for updates
# every 'updates_interval' minutes. If zero, do not automatically
# check for updates. When enabled, a blackboard u symbol, 𝕦, will be
# displayed at the right end of status bar when an update is available
# or a question mark when the check cannot be completed as, for
# example, when there is no internet connection.
locale: en_US
# locale abbreviation. E.g., "en_AU" for English (Australia), "en_US"
# for English (United States), "fr_FR" for French (France) and so
# forth. Google "python locale abbreviatons" for a complete list."
vi_mode: true
# true or false. Use vi keybindings for editing if true else use emacs
# style keybindings.
secret: HIr13FiYj3
# string to use as the secret_key for @m masked entries. E.g.
# 'X6i2SGWu6m'. In etm versions after 4.0.21, the default string is
# randomly generated when this file is created or when the secret
# value is removed and etm is restarted. WARNING: if this key is
# changed, any @m entries that were made before the change will be
# unreadable after the change.
omit_extent:
# A list of calendar names. Events with @c entries belonging to this
# list will only have their starting times displayed in agenda view
# and will neither appear nor cause conflicts in busy view.
keep_current: [3, 46]
# A list of two, non-negative integers for "weeks" and "width". If
# weeks is positive, the agenda for that integer number of weeks
# starting with the current week will be written to "current.txt" in
# your etm home directory and updated when necessary. The format will
# be scaled to fit "width". A width of 46, e.g, fits an iPhone display
# in portrait mode. You could, for example, create a link to
# "current.txt" in a pCloud or GoogleDrive folder and always have access
# to your current agenda on your mobile device.
keep_next: true
# true or false. If true, the 'do next' view will be written to
# "next.txt" in your etm home directory. As with "current.txt", a link
# to this file could be created in a pCloud or DropBox folder for
# access from your mobile device.
archive_after: 0
# non-negative integer. If zero, do not archive items. If positive,
# finished tasks and events with last datetimes falling more than this
# number of years before the current date will automatically be
# archived on a daily basis. Archived items are moved from the
# "items" table in the database to the "archive" table and will no
# longer appear in normal views. Note that unfinished tasks and
# journal entries are not archived.
refresh_interval: 6
# 6, 12, 30 or 60. The event loop responsible for refreshing
# etm caches, updating alerts, timers and so forth, repeats once
# every refresh_interval seconds.
num_finished: 0
# non-negative integer
# If positive, when saving retain only the most recent "num_finished"
# completions of an infinitely repeating task, i.e., repeating without
# an "&c" count or an "&u" until attribute. If zero or not infinitely
# repeating, save all completions.
num_repetitions: 10
# positive integer
# Show at most this number of repetitions when showing repetitions
# with (^r) or when showing completion history (^h). In the former
# case these are instances for the selected item (repeating of any
# item type) starting from date of the selected item and in the latter
# case these are the completion instances (task item type). Note that
# the num_finished setting can affect the number available for display
# for the completion history.
limit_skip_display: false
# true or false. If true, only the first instance of a task with "@o
# s" (overdue skip) will be displayed. For a task with an "@s" entry
# that is a date this will be the first instance that falls on or
# after the current date. Otherwise, when the "@s" entry is a
# datetime, this will be the first instance that falls on or after the
# current time.
connecting_dots: true
# true or false. If true, display dots connecting the item summary and
# the right-hand details columns in tree views.
usedtime_minutes: 6
# 0, 1, 6, 12, 30 or 60. Round up used times. With 0, no rounding is done
# and times are reported in hours, minutes and seconds. With 1, after
# rounding up to the nearest minute, times are reported as hours and minutes.
# Otherwise, rounding is up to the nearest integer multiple of
# usedtime_minutes and times are reported as floating point hours. E.g.,
# with usedtime_minutes = 6, 1 minute would be rounded up to 6 minutes and
# reported as 0.1 hours. Similarly 13 minutes would be rounded up to 18
# minutes and reported as 0.3 hours. The numbers 6, 12, 30 and 60 are
# characterized by the fact that each is an integer multiple of 6 and 60 is
# evenly divisible by each. This allows reported times to be expressed as
# hours and tenths of an hour for each. Note that when rounding is specified,
# each "@u" timeperiod is rounded before aggregation. Whatever the setting,
# a used time record created using the timer is accurate to the nearest
# second.
usedtime_hours: 6
# 0, 1, 2, ..., 24. The daily goal for used time. This is used in effort
# view to control the display of the daily used time bars. The goal is to
# to maximize the granularity of the bar when displaying this number of hours
# in the space allowed by the terminal width.
journal_name: daily
# Journal items with this index entry and with an @s entry will have the
# year and month appended to the index. E.g., with the setting
# journal_name: daily
# this journal entry
# % visited Yellowstone @s 22/6/24 @i daily
# would be displayed in journal view as if the index entry were
# @i daily/2022/ 6
# thus organizing such entries by the year and month of their scheduled dates.
# Within each month, entries will be also ordered by the month day.
alerts:
# A dictionary with single-character, "alert" keys and corresponding
# "system command" values. Note that characters "t" (text message) and
# "e" (email) are already used. The "system command" string should be
# a comand with any applicable arguments that could be run in a
# terminal. Properties of the item triggering the alert can be
# included in the command arguments using the syntax {prop}, e.g.,
# {summary} in the command string would be replaced by the summary of
# the item. Similarly {start} by the starting datetime, {time} by the
# starting time (omits the date for the current date), {when} by the time
# remaining until the starting datetime, {now} by the current time,
# {location} by the @l entry and {description} by the @d entry. E.g., If
# the event "* sales meeting @s 2019-02-12 3p" triggered an alert 30 minutes
# before the starting time the string "{summary} {when}" would expand to
# "sales meeting in 30 minutes". E.g. on my macbook
#
# alerts:
# v: /usr/bin/say -v "Alex" "{summary}, {when}"
# ...
#
# would make the alert 'v' use the builtin text to speech sytem
# to speak the item's summary followed by a slight pause
# (the comma) and then the time remaining until the starting
# time, e.g., "sales meeting, in 20 minutes" would be triggered
# by including "@a 20m: v" in the reminder.
expansions:
# A dictionary with 'expansion name' keys and corresponding
# 'replacement string' values. E.g. with
#
# expansions:
# tennis: "@e 1h30m @a 30m: d @i personal:exercise"
# ...
#
# then when "@x tennis" is entered the popup completions for
# "@x tennis" would offer replacement by the corresponding
# "@e 1h30m @a 30m: d @i personal:exercise".
sms:
body: '{location} {when}'
from: 'None'
server: 'None'
pw: 'None'
# Settings to send "t" (sms text message) alerts to the
# list of phone numbers from the item's @n attendee
# entries using the item's summary and the body as specified
# in the template below as the message. E.g., suppose you
# have a gmail account with email address "[email protected]"
# and want to text alerts to Verizon moble phone (123)
# 456-7890. Then your sms entries should be
# from: [email protected]
# pw: your gmail password
# server: smtp.gmail.com:587
# and your item should include the following attendee entry
# @n [email protected]
# In the illustrative phone number, @vzwpix.com is the mms
# gateway for Verizon. Other common mms gateways are
# AT&T: @mms.att.net
# Sprint: @pm.sprint.com
# T-Mobile: @tmomail.net
# Note. Google "mms gateway listing" for other alternatives.
smtp:
body: '{location} {when}\n{description}'
from: 'None'
server: 'None'
id: 'None'
pw: 'None'
# Settings to send "e" (email message) alerts to the list of email
# addresses from the item's @n attendee entries using the item's
# summary as the subject and body as the message. E.g., if you have a
# gmail account with email address "[email protected]", then your
# entries should be
# from: [email protected]
# id: whatever457
# pw: your gmail password
# server: smtp.gmail.com
locations:
# A dictionary with location group names as keys and corresponding
# lists of locations as values. When given, do next view will group
# items first by the location group name and then by the location
# within that group. Note that locations can appear under more than
# one group name. E.g.,
# locations:
# home: [home, garage, yard, phone, computer]
# work: [work, phone, computer, copier, fax]
# Items with a location entry that does not belong to one of these
# location groups will be listed under 'OTHER' and items without a
# location entry under 'OTHER' and then tilde.
queries:
td: 'm l -q equals itemtype - and ~exists f'
ui: 'u i[:1]; MMM YYYY; i[1:2] -a d'
si: 's i[:1]; MMM YYYY; i[1:2] -a u, d'
mi: 'exists u and ~exists i'
arch: 'a exists itemtype'
uw: 'u WWW; ddd D -b weekbeg - 1w -e weekend'
find: 'includes summary d {}'
f: 'includes summary d {}'
index: 's MMM YYYY; ddd D -q in i {}'
# A dictionary with short query "keys" and corresponding "query"
# values. Each "query" must be one that could be entered as the
# command in query view. Keys can be any short string other than
# 'a', 'u', 'c' or 'l' which are already in use.
# queries:
# td: m l -q equals itemtype - and ~exists f
# mi: exists u and ~exists i
# arch: a exists itemtype
# find: includes summary d {}
# The latter would allow you to enter, e.g., `find waldo` and have
# it expand to `includes summary d waldo` and thus locate all
# reminders with `waldo` either in the summary or d (the description).
style: dark
# dark or light. Set the defaults for dark or light terminal
# backgounds. Some output may not be visible unless this is set
# correctly for your display.
type_colors:
# A dictionary with type keys and corresponding named-color or hex
# values. The default colors are determined by the 'dark' or 'light'
# style setting as follows:
#
# key dark default light default
# ----------- ----------------- -----------------
# available 'LightSkyBlue', 'DarkBlue',
# begin 'Gold', 'DarkViolet',
# event 'LimeGreen', 'DarkGreen',
# finished 'DarkGrey', 'LightSlateGrey',
# inbox 'OrangeRed', 'MediumVioletRed',
# journal 'GoldenRod', 'Brown',
# pastdue 'LightSalmon', 'Red',
# plain 'Ivory', 'Black',
# today 'Ivory bold', 'Black bold',
# used 'Khaki', 'DodgerBlue',
# waiting 'SlateGrey', 'DarkSlateBlue',
# wrap 'ForestGreen', 'LightGrey',
# running 'OrangeRed', 'Gold',
# paused 'MediumVioletRed', 'DarkViolet',
# Explanations for the key names:
# available: available task/job reminders
# begin: begin by warnings
# event: event reminders
# finished: finished task/job reminders
# inbox: inbox reminders
# journal: journal reminders
# pastdue: pasdue task warnings
# plain: headings such as outline branches
# today: the current and following agenda date headings
# used: used time rows in effort and used time views
# waiting: waiting job reminders (jobs with unfinished prereqs)
# wrap: before and after rows for events in agenda view with
# @w entries
# running: status bar color for 'r', running timer
# paused: status bar color for 'p', paused timer
#
# E.g., with style 'dark', the default color for 'available' is
# 'LightSkyBlue'. This entry
# colors:
# available: CornFlowerBlue
# would change the 'available' color to 'CornflowerBlue' while leaving
# the other 'dark' colors unchanged.
#
# To preview the namedcolors, download "namedcolors.py" from
# "https://github.com/dagraham/etm-dgraham",
# open a terminal with your chosen background color and run
# python3 <path to namedcolors.py>
# at the command prompt.
window_colors:
# A dictionary with style component keys and corresponding lists of
# [background, foreground, attribute]
# components. background and foreground can either be named colors,
# hex colors, or ''. Attribute is an optional font attribute such
# as 'bold' which must, of course, be supported by the font used in
# your terminal. The default settings are determined by the 'dark'
# or 'light' style setting as follows:
#
# key dark default light default
# ------------------- ----------------------------- -----------------------------
# ask: [grey2, Lime, bold] [Cornsilk, Lime, bold]
# button.focused: [DarkGreen, White] [DarkGreen, White]
# details: [, Ivory] [, Black]
# dialog shadow: [#444444, ] [#444444, ]
# dialog: [DarkSlateGrey, White] [DimGrey, White]
# dialog-entry: [White, Black] [White, Black]
# dialog-output: [DarkSlateGrey, Lime] [DimGrey, Lime]
# dialog.body label: [, White] [, White]
# dialog.body: [DarkSlateGrey, White] [DimGrey, White]
# entry: [grey2, LightGoldenRodYellow] [Cornsilk, LightGoldenRodYellow]
# frame.label: [DarkSlateGrey, White] [DimGrey, White]
# menu: [DarkSlateGrey, White] [DimGrey, White]
# menu-bar: [grey1, White] [grey1, White]
# menu-bar.selected-item: [#ffffff, #000000] [#ffffff, #000000]
# menu.border: [, #aaaaaa] [, #aaaaaa]
# not-searching: [, #222222] [, #777777]
# query: [, Ivory] [, Black]
# reply: [grey2, DeepSkyBlue] [Cornsilk, DeepSkyBlue]
# shadow: [#222222, ] [#222222, ]
# status: [grey1, White] [grey1, White]
# status.key: [, #ffaa00] [, #ffaa00]
# status.position: [, #aaaa00] [, #aaaa00]
# text-area: [grey2, Ivory] [Cornsilk, Black]
# window.border shadow: [, #444444] [, #444444]
# window.border: [, #888888] [, #888888]
#
# Note that 'grey1' (#396060) and 'grey2' (#1d3030) are colors named
# within etm itself. They are, respectively, one shade lighter and two
# shades darker than DarkSlateGrey.
#
# Any of the style attributes above can be modified. E.g., with style
# 'dark', the default for 'text-area' is [grey2, Ivory]. This entry
# window_colors:
# text-area: [Black, White]
# would change the 'text-area' setting to 'Black' as the background color
# and 'White' as the foreground color while leaving the other style settings
# unchanged.
#### end cfg.yaml ####
See Saved Queries for more information about queries that allow for replaceable parameters.
Note that in the 'dictionary' entries above, the components must be indented (using 2 spaces not tabs). E.g., the illustrative alert entry would be:
alerts:
v: /usr/bin/say -v "Alex" "{summary}, {when}"
All etm reminders are stored in the text file etm.json in your etm home directory using the wonderful TinyDB package. [Prior to etm 5.0.0, the data storage file was named db.json. The format and name changed slightly with that version.] This json file is human readable but not easily editable. When you start etm for the first time, this file will have no entries:
{
"items": {},
"archive": {}
}
To json this is a hash/dictionary with two keys: "items" and "archive". Both have empty hashes/dictionaries as values. Add a first reminder to take out the trash on Mondays
- trash @s 2019-12-21 @r w &w mo
at 10:26am on Dec 21, 2019 EST and the file would change to
{
"items": {
"1": {
"itemtype": "-",
"summary": "trash",
"s": "{D}:20191223",
"r": [
{
"r": "w",
"w": [
"{W}:MO"
]
}
],
"created": "{T}:20191221T1526A"
}
},
"archive": {}
}
items now has a first item with key (unique identifier) "1". The value corresponding to this key is a hash with keys and values corresponding to the attributes of the reminder. Though these attributes are stored as strings, some actually represent non-string objects. How is this possible?
Consider the entry 2019-12-23 for @s. To etm this is a pendulum date object. When etm stores this record, TinyDB recognizes that this attribute is a pendulum date object and encodes/serializes it as the string "{D}:20191223". When etm retrieves this record from storage, TinyDB recognizes from the {D} that it is to be decoded and returned as a pendulum date object. All this is completely transparent - etm gives a date object to TinyDB which stores it as a string and when etm wants it back, TinyDB deserializes it and returns it as a date object.
As another example, When the reminder is created by etm the created timestamp is handed to TinyDB as an aware pendulum datetime object with US/Eastern as the timezone. TinyDB recognizes this and, because it is an aware datetime, first converts it to Universal time and then encodes/serializes it as "{T}:20191221T1526A". The {T} indicates that it is a datetime object and the appended A indicates that it is aware and thus has been converted to Universal time. When etm retrieves this record, TinyDB recognizes from the {T} and the A that this is an aware datetime object, decodes it as an aware datetime object and, because it is aware, converts it from Universal time to whatever the current local timezone happens to be before returning it. Had this been a naive datetime, an N would have been appended to the serialization and no conversion would have been done either way.
These date and datetime serializations are extensions of TinyDB provided by etm. Three further extensions are also provided: interval for pendulum duration objects using the tag {I}, weekday for dateutil weekday objects using the tag {W} and mask using the tag {M} for encoding/serializing etm strings in a masked or obfuscated manner.