Updated to 24.1.

Ableton/Ableton-Push.md

@@ -152,10 +152,16 @@ After you have copied the file reboot your computer.
     * Other buttons behave as above.
 
 6. **Device** - Press "Device" to enter
-    * Buttons of 1st row select the device or the parameter banks. Use in combination with the Delete button to delete a device.
-    * 1st button on 2nd row in device modes dis-/enables device (button above display on Push 2/3).
-    * 7th button on 2nd row in device modes displays VST window or pop-out window of specific Bitwig devices (button above display on Push 2/3).
-    * 8th button on 2nd row in device modes moves up to tracks.
+    * The buttons of the 1st row select the device or the parameter banks. Use in combination with the Delete button to delete a device.
+    * 2nd row buttons (buttons above display on Push 2/3):
+        * Button 1: Dis-/enables the device.
+        * Button 2: Shows/hides the remote controls section of the plugin.
+        * Button 3: Toggles the device between extended and small view.
+        * Button 4: Enter the *Chains* sub-devices for Bitwig devices which have slots.
+        * Button 5: Toggles between device and parameter bank navigation.
+        * Button 6: Pins the device to the controller. If a different device is selected in the DAW or from another contrroller it will not change.
+        * Button 7: Opens/closes the plugin window or pop-out window of specific Bitwig devices.
+        * Button 8: Navigates up to the track mode.
     * To navigate groups, layers and devices press now the respective first row button. Long press any of the first row buttons to move up the hierarchy again.
     * 8 edit knobs: Change 8 parameters of the selected device (FX). Hold **Shift** for fine adjustments. Hold the delete key and touch a knob to reset its value.
     * Left/Right buttons: Select next/previous device or parameter bank
@@ -260,7 +266,7 @@ All the buttons and knobs behave like in Play mode with the following exceptions
 * The ribbon controls the crossfader. Press Shift and touch the Ribbon to center the crossfader.
 * Press **Delete+Pad** in Session Mode to the delete the clip.
 
-When in Session view and press Session again a menu turns up (like in note view) where you can select different views. The normal Session view, the flipped version and the Scene view. Use the Layout button on Push 2/3 to quickly step through these views. Furthermore, you can select the Clip, Marker or Mixer mode which display either clips/scenes, markers or the mixer in the display.
+When in Session view and press Session again a menu turns up (like in note view) where you can select different views. The normal Session view, the flipped version and the Scene view. Use the Layout button on Push 2/3 to quickly step through these views. Furthermore, you can select the Clip, Marker or Mixer mode which display either clips/scenes, markers or the mixer in the display. In Clip and Marker mode the knobs control the volume of the tracks.
 **Large Knob** (Push 3 only): When clip/scene mode is active it navigates the clip/scenes grid. Turn it to select the previous/next clip/scene. Press it to start the clip/scene. Move it to the left/right to switch tracks/select the previous/next scene.
 
 ### Marker mode

Akai/Akai-APC40-APC40mkII.md

@@ -244,6 +244,7 @@ You can set several preferences which are stored when you exit the DAW. These ar
 * Quantize Amount: The amount of quantization to use when Quantize is executed. 100% aligns all notes fully to the grid.
 * Default note view: The view that should be the default when you select an instrument track for the first time (e.g. Play, Drum, Sequencer, ...).
 * Start with session view: Enables the session view on startup if active otherwise the default note view is displayed.
+* Turn off scale pads: - *only mkII* - If enabled, all pads which represent notes which are in-scale are switched off (instead of white).
 
 ### Transport
 

Akai/Akai-Fire.md

@@ -128,8 +128,8 @@ Press the **Note** button to activate. The NOTE LED is lit orange.
 * **Select Knob**: Move the note range one octave up/down
 * **Grid buttons**: Toggle Chromatic / In Scale
 * **Shift+Grid buttons**: Change the Scale
-* **Alt+Grid buttons**: Change the Scale Layout
-* **Shift+Alt+Grid buttons**: Change the Scale Base key
+* **Shift+Alt+Grid buttons**: Change the Scale Layout
+* **Alt+Grid buttons**: Change the Scale Base key
 * **Mute/Solo 1-4**: Same as in Note Sequencer mode
 
 ### Piano Mode
@@ -281,16 +281,22 @@ In the first 2 4x4 blocks the note *repeat settings* can be configured:
 * The left/top button dis-/enables note repeat
 * The buttons 3 and 4 in the top row select the arpeggiator modes
 * All other buttons in the first block select the number of octaves
-* The first to columns in the second block select the period length
+* The first two columns in the second block select the period length
 * The remaining two columns in the second block select the note length
 
-The other buttons have the following functions:
+The buttons in the 3rd and 4th block have the following functions:
 
-* With the bottom row of the 3rd and 4th block the length of new clips are selected (which can be created with Alt+Record).
-* The 10th button of the first row (blue) activates duplicate mode. Can be used with the first row of the Mix mode to duplicate tracks and with clips in the Session mode.
-* The 11th button of the first row (green) doubles the content of the currently selected clip.
-* The 12th button of the first row (red) activates delete mode. Can be used with the first row of the Mix mode to delete tracks and with clips in the Session mode.
-* The three buttons in the upper right corner create new Instrument, Audio and Effect tracks.
+* Buttons of the 1st row (from top):
+  * Button 10 (blue) activates duplicate mode. Can be used with the first row of the Mix mode to duplicate tracks and with clips in the Session mode.
+  * Button 11 (green) doubles the content of the currently selected clip.
+  * Button 12 (red) activates delete mode. Can be used with the first row of the Mix mode to delete tracks and with clips in the Session mode.
+  * Buttons 14-16 create new Instrument, Audio and Effect tracks.
+* Buttons of the 2nd row:
+  * Button 14 (green/red): Toggles pinning of the cursor track.
+  * Button 15 (green/red): Toggles pinning of the cursor device.
+  * Button 16 (green/red): Toggles pinning of the cursor clip.
+* Buttons of the 3rd row select the Automation Write Mode.
+* The bottom row selects the length of new clips (which can be created with Alt+Record).
 
 The Mute/Solo buttons have the following functions:
 
@@ -382,6 +388,7 @@ These settings are specific to each project.
 ### Play and Sequence
 
 * MIDI Edit: Select the MIDI channel to use to display and edit MIDI notes in sequencers.
+* Turn off scale pads: If enabled, all pads which represent notes which are in-scale are switched off (instead of white).
 
 <div style="page-break-after: always; visibility: hidden"> 
 \pagebreak 

Bitwig/Changes.md

@@ -1,5 +1,50 @@
 # Changes - Bitwig Studio
 
+**24.1.0**
+
+* Requires Bitwig 5.0+
+* APC40mkII, Fire, Launchpad, Maschine, Maschine JAM, OXI One, Push
+  * New: Added new setting 'Turn off scale pads'. If enabled, all pads which represent notes which are in-scale are switched off (instead of white).
+  * New: Played chords are displayed in play modes.
+* Fire
+  * New: The Shift Mode allows to pin the cursor track, cursor device and cursor clip (3 green buttons in the 2nd row from the top).
+  * New: The Automation Write Mode can be selected in the Shift Mode (buttons of the 3rd row).
+  * New: The initial pad brightness is now set to 20%.
+  * New: Switched button combinations for changing the root note and changing the scale layout.
+  * New: Toggling clip launcher/arranger automation gives now feedback in the display.
+* Generic Flexi
+  * New: Functions can now be assigned to 10 different layers. With the 'Function Layers' functions each layer can be temporarily or permanently activated.
+  * New: Added functions for Groove: 'Toggle Active', 'Set Shuffle Amount', 'Set Accent Amount'.
+  * New: Added functions 'Track: Scroll Bank Page by 1 left', 'Track: Scroll Bank Page by 1 right'.
+  * New: Added functions 'FX Track: Scroll Bank Page by 1 left', 'FX Track: Scroll Bank Page by 1 right'.
+  * New: Added functions 'Scene: Scroll Bank Page by 1 left', 'Scene: Scroll Bank Page by 1 right'.
+  * New: Added settings for 'Behaviour on Pause' and 'Behaviour on Stop'.
+* HUI
+  * New: Added track, device and EQ modes.
+  * New: AUTO1-8 is used for knob press as well (e.g. used like this with X-Touch).
+  * New: 'Paste' adds an instrument track.
+  * New: 'Shift+Paste' adds an effect track.
+  * New: 'Option+Paste' adds an audio track.
+  * New: 'Copy' inserts/replaces a device.
+  * New: 'Shift+Copy' inserts a device before the currently selected device.
+  * New: Option+Copy' inserts a device after the currently selected device.
+* MCU
+  * New: Keep the Shift button pressed to show the devices on the selected track. Press the respective knob to select the device for editing.
+  * New: Added 'Channel Prev/Next' to the function commands which emulate the respective buttons for devices which do not have them.
+* OSC
+  * New: Added command to de-/activate a layer (/device/layer/{1-8}/activated).
+* OXI One
+  * New: Playing/recording clips do no longer blink.
+* Push 1-3
+  * New: In Clips and Markers mode the knobs control now the volume of the tracks.
+  * New: Added Load/Save commands to the master mode.
+* SLMk3
+  * New: Project Parameter Mode - info display shows now the project name.
+  * New: Track Parameter Mode - info display shows now the track name.
+  * New: Parameter Mode - info display shows now the track name instead of the selected parameter page.
+  * New: The first instrument of the track can now be edited (long press UP, then select 'First Ins').
+  * Fixed: Selecting Project/Track parameter pages did not work.
+
 **24.0.0**
 
 * Requires Bitwig 5.0+

Generic-Tools-Protocols/Generic-Flexi.md

@@ -49,6 +49,7 @@ Each slot has the following parameters:
 * Knob Mode: This option only applies to continuous functions like changing the volume of a track. Depending on the possibilities of your controller knob you need to choose the matching mode.
 * Function: Choose a function from the different categories that should be executed, when the configured MIDI message is received.
 * Send value to device: This option only applies to continuous functions like changing the volume of a track. If it is enabled, the current value is sent to the controller with the configured CC.
+* Functions Layer: Assigns the function to one of 10 layers. The function is only executed if the respective layer is active. Layer 1 is the default layer. Use the functions under *Function Layers* to temporarily or permanently activate a different layer.
 
 ## Features of Modes
 
@@ -215,6 +216,11 @@ If the connected device has a keyboard or pads, the following settings allow to
 * Knob Speed Slow: Adjust the speed of the knobs when used with Shift for fine adjustments. There is a function to define the Shift button available (*Global: Shift button*).
 * Exclude deactivated items: If active, deactivated items like tracks will not be displayed on the controller. This cleans up the displayed banks but also prevents the options to activate a deactivated item from the controller.
 
+### Transport
+
+* Behaviour on Pause: Sets the action to be executed when playback is stopped with the Play button.
+* Behaviour on Stop: Sets the action to be executed when playback is stopped with the Stop button.
+
 ## Document Settings
 
 These settings are specific to each project.

Generic-Tools-Protocols/Open-Sound-Control-(OSC).md

@@ -443,6 +443,7 @@ The following commands apply to all devices. The cursor device (/device), the pr
 | /device/param/{1-8}/touched           | {0,1}         | Turn off/on the touched state.                 |
 | /device/page/selected                 | {1-8}         | Select the device page.                        |
 | /device/page/{1-8}/selected           |               | Select the device page.                        |
+| /device/layer/{1-8}/activated         | {0,1}         | De-/actives the layer.                         |
 | /device/layer/{1-8}/selected          |               | Select the layer.                              |
 | /device/layer/{1-8}/name              | {text}        | Set a new name for the layer.                  |
 | /device/layer/{1-8}/volume            | {0-MAX_VALUE} | Set the volume of the layer.                   |

Mackie/Mackie-HUI.md

@@ -18,7 +18,7 @@ The settings dialog contains profiles for several devices, which sets the correc
 * **Repeat** (HUI LOOP) - Toggle repeat
 * **Stop** (HUI STOP) - Stop playback. Press again to move play cursor to start of song. Double click to move play cursor to the end of the song.
 * **Play** (HUI PLAY) - Start/Stop playback. Double click to move play cursor to start of song.
-* **Shift (HUI SHIFT)+Play** - Toggle repeat
+* **Shift (HUI SHIFT)+Play** - Toggle arranger repeat
 * **Option (HUI OPTION)+Play** - Toggle Punch In
 * **Option+Shift+Play** - Toggle Punch Out
 * **Record** (HUI RECORD) - Start/Stop recording
@@ -32,7 +32,7 @@ The settings dialog contains profiles for several devices, which sets the correc
 * **Zoom** - If active, the arrow buttons left/right zoom the arranger horizontally. The up/down arrows both toggle the height of the track.
 * **Metronome** (HUI PRE) - Toggle metronome
 * **Tap Tempo** - (HUI POST) - Executes Tap Tempo
-* **Quick Punch** - (HUI QICK PUNCH) - Toggle Punch In
+* **Quick Punch** - (HUI QUICK PUNCH) - Toggle Punch In
 * **In** - (HUI IN) - Toggle Punch In
 * **Out** - (HUI OUT) - Toggle Punch Out
 * **Audio Engine** (HUI ON LINE) - Toggle Audio Engine on/off for current project
@@ -53,8 +53,11 @@ The settings dialog contains profiles for several devices, which sets the correc
 
 ### Assignment
 
+* **Track** (HUI ASSIGN1 INPUT) - Activates track mode
 * **Pan** (HUI MODE PAN) - Select the Panorama edit mode. See the section **Edit Modes** below.
 * **Send A-E** (HUI MODE SEND A-E) - Select the Send edit mode A-E.
+* **EQ** (HUI ASSIGN1 OUTPUT) - Selects EQ mode
+* **Device** (HUI ASSIGN2 BYPASS) - Activates device mode
 
 ### Automation
 
@@ -64,6 +67,15 @@ The settings dialog contains profiles for several devices, which sets the correc
 * **Touch** (HUI TOUCH) - Enables arranger automation recording and sets it to Touch mode.
 * **Latch** (HUI LATCH) - Enables arranger automation recording and sets it to Latch mode.
 
+### Edit
+
+* **Paste** (HUI PASTE) - Adds an instrument track.
+* **Shift+Paste** - Adds an effect track.
+* **Option+Paste** - Adds an audio track.
+* **Copy** (HUI COPY) - Insert/replace a device
+* **Shift+Copy**: Insert a device before the currently selected device.
+* **Option+Copy**: Insert a device after the currently selected device.
+
 ### Utilities
 
 * **Note Editor** (HUI WINDOW EDIT) - Toggles the display of the note editor pane
@@ -93,6 +105,19 @@ The settings dialog contains profiles for several devices, which sets the correc
 * **8 faders** (HUI FADER_TOUCH1-8) - Change volume of selected 8 tracks. Touching a fader automatically selects the track.
 * **Press knob** (HUI VSELECT1-8) - Resets the current parameter to its default value.
 
+### Track edit mode
+
+Press _Assign 1 - Input_ to enter.
+
+* **Knob 1** - Changes the volume of the selected channel.
+* **Knob 2** - Changes the panorama of the selected channel.
+* **Knob 3** - Changes Send 1 of the selected channel.
+* **Knob 4** - Changes Send 2 of the selected channel.
+* **Knob 5** - Changes Send 3 of the selected channel.
+* **Knob 6** - Changes Send 4 of the selected channel.
+* **Knob 7** - Changes Send 5 of the selected channel.
+* **Knob 8** - Changes Send 6 of the selected channel.
+
 ### Panorama edit mode
 
 Press _Pan_ to enter.
@@ -101,9 +126,25 @@ Press _Pan_ to enter.
 
 ### Send 1 - 8 edit mode
 
-Press _Send_ to enter. Press multiple times to select the Send channels 1 to 8. Use in combination with the **Track select** buttons to select the respective Send channel 1-8.
+Press _Send 1_ to enter. Press multiple times to select the Send channels 1 to 8. Use in combination with the **Track select** buttons to select the respective Send channel 1-8.
+_Send 2_ and _Send 3_ directly select Send channels 2 and 3.
+
+* **8 knobs** - Change the volume of the selected send on that channel.
+
+### Device edit mode
+
+Press _Assign 2 - Bypass_ to enter.
+
+* **8 knobs** - Changes the parameters of the selected parameter page.
+* Use Channel Left/Right to switch between the different parameter pages.
+* Fader Bank Left/Right switches between the devices on the selected track.
+
+### EQ edit mode
+
+Press _Assign 1 - Output_ to enter. Edits the equalizer device on the track. If none is present a device is inserted when the mode gets activated.
 
-* **8 knobs** - Change the volume of send of that channel.
+* **8 knobs** - Changes the parameters of the EQ.
+* Use Channel Left/Right to switch between the different parameter pages.
 
 ## Foot switches
 

Mackie/Mackie-MCU.md

@@ -211,6 +211,8 @@ Touch the master fader to enter
 * **< CHANNEL** (MCU TRACK LEFT) - Selects the previous parameter page.
 * **CHANNEL >** (MCU TRACK RIGHT) - Selects the next parameter page.
 
+Keep the Shift button pressed to show the devices on the selected track. Press the respective knob to select the device for editing.
+
 ### Equalizer edit mode (E9)
 
 Works like the Device edit mode but for the equalizer device on the track (Bitwig: EQ+, Reaper: ReaEQ).

Native-Instruments/Native-Instruments-Maschine-Jam.md

@@ -286,6 +286,7 @@ You can set several preferences which are stored when you exit the DAW. These ar
 * Quantize Amount: The amount of quantization to use when Quantize is executed. 100% aligns all notes fully to the grid.
 * Default note view: The view that should be the default when you select an instrument track for the first time (e.g. Play, Drum, Sequencer, ...).
 * Start with session view: Enables the session view on startup if active otherwise the default note view is displayed.
+* Turn off scale pads: If enabled, all pads which represent notes which are in-scale are switched off (instead of white).
 
 ### Session
 

Native-Instruments/Native-Instruments-Maschine-Mk3.md

@@ -290,6 +290,7 @@ You can set several preferences which are stored when you exit the DAW. These ar
 * Fixed Accent Value: The velocity value to use when fixed accent is active.
 * Quantize Amount: The amount of quantization to use when Quantize is executed. 100% aligns all notes fully to the grid.
 * Ribbon Mode: Select the function of the ribbon strip.
+* Turn off scale pads: If enabled, all pads which represent notes which are in-scale are switched off (instead of white).
 
 ### Session
 

Novation/Novation-Launchpad.md

@@ -418,6 +418,7 @@ You can set several preferences which are stored when you exit the DAW. These ar
 * Quantize Amount: The amount of quantization to use when Quantize is executed. 100% aligns all notes fully to the grid.
 * Default note view: The view that should be the default when you select an instrument track for the first time (e.g. Play, Drum, Sequencer, ...).
 * Start with session view: Enables the session view on startup if active otherwise the default note view is displayed.
+* Turn off scale pads: If enabled, all pads which represent notes which are in-scale are switched off (instead of white).
 
 ### Transport