Update to 24.5.1.

git-moss · Oct 13, 2024 · 7efae37 · 7efae37
1 parent 505571d
commit 7efae37
Show file tree

Hide file tree

Showing 7 changed files with 62 additions and 24 deletions.
diff --git a/Bitwig/Changes.md b/Bitwig/Changes.md
@@ -1,5 +1,20 @@
 # Changes - Bitwig Studio
 
+**24.5.1**
+
+* Requires Bitwig 5.2+
+* AutoColor
+  * Fixed: Could crash on start and shutdown.
+* Kontrol Mk2/Mk3
+  * New: Added support for Kontakt 8.
+  * Fixed: Only show option to select mode-switch button on Mk3 devices.
+* LaunchControl XL
+  * New: Keep the Device button pressed and use Send Select up/down to switch between either the cursor device, track parameters or project parameters.
+* Launchpad
+  * New: Press Shift+Session twice to activate the new Scene Play view. In this view each pad represents 1 scene, which means that 64 scenes can be directly triggered.
+* MCU
+  * Fixed: Switched Shift+Press Knob in Parameter mode for selecting devices to Control+Press Knob to still be able to do fine adjustments with Shift+Knob.
+
 **24.5.0**
 
 * Requires Bitwig 5.2+

diff --git a/Generic-Tools-Protocols/Generic-Flexi.md b/Generic-Tools-Protocols/Generic-Flexi.md
@@ -49,7 +49,7 @@ Each slot has the following parameters:
 * Knob Mode: This option only applies to continuous functions like changing the volume of a track. Depending on the possibilities of your controller knob you need to choose the matching mode.
 * Function: Choose a function from the different categories that should be executed, when the configured MIDI message is received.
 * Send value to device: This option only applies to continuous functions like changing the volume of a track. If it is enabled, the current value is sent to the controller with the configured CC.
-* Functions Layer: Assigns the function to one of 10 layers. The function is only executed if the respective layer is active. Layer 1 is the default layer. Use the functions under *Function Layers* to temporarily or permanently activate a different layer.
+* Functions Layer: Assigns the function to one of 10 layers. The function is only executed if the respective layer is active. Layer 1 is the default layer. Use the functions under *Function Layers* to temporarily or permanently activate a different layer. **Note:** if notes are used as triggers, they are always blocked from being sent to Bitwig, no matter if the layer is active or not. This is due to the fact since this configuration needs to happen on startup of the extension.
 
 ## Features of Modes
 

diff --git a/Mackie/Mackie-MCU.md b/Mackie/Mackie-MCU.md
@@ -213,7 +213,7 @@ Touch the master fader to enter
 * **< CHANNEL** (MCU TRACK LEFT) - Selects the previous parameter page.
 * **CHANNEL >** (MCU TRACK RIGHT) - Selects the next parameter page.
 
-Keep the Shift button pressed to show the devices on the selected track. Press the respective knob to select the device for editing.
+Keep the Control button pressed to show the devices on the selected track. Press the respective knob to select the device for editing.
 Keep the Option button pressed to show the parameter pages of the selected device. Press the respective knob to select the page for editing.
 
 ### Equalizer edit mode (E9)

diff --git a/Native-Instruments/Native-Instruments-Kontrol2.md b/Native-Instruments/Native-Instruments-Kontrol2.md
@@ -97,7 +97,7 @@ You can set several preferences which are stored when you exit the DAW. These ar
 
 ### Hardware Setup
 
-* Switch modes with: Mainly relevant for the Mk3 keyboards to select a button which can be used to switch the extra modes (sends and parameters).
+* Switch modes with (only Mk3): Select a button which can be used to switch the extra modes (sends and parameters).
 
 ### Transport
 

diff --git a/Novation/Novation-LaunchControlXL.md b/Novation/Novation-LaunchControlXL.md
@@ -54,7 +54,7 @@ In the mix mode the labels on the device match the functions (but there is more)
     * **Mute** (amber): If active the Mute state of the 8 tracks on the currently selected track page is toggled.
     * **Solo** (green): If active the Solo state of the 8 tracks on the currently selected track page is toggled. If the *Solo* button is kept pressed it displays 8 scenes. Press one of the buttons to start the scene. The selected scene is highlighted.
     * **Record Arm** (red): If active the Record Arm state of the 8 tracks on the currently selected track page is toggled. If the *Record Arm* button is kept pressed it displays the transport bar.
-* **Send Select**: Select the previous/next page of sends to control.
+* **Send Select**: Select the previous/next page of sends to control. If the *Device* button is pressed it selects the previous/next parameters mode: either the cursor device, track parameters or project parameters.
 * **Track Select**: Select the previous/next page of tracks to control. If the *Device* button is pressed it selects the previous/next device of the selected track. If the *Solo* button is pressed it selects the previous/next page of scenes.
 
 #### Knobs / Faders
@@ -63,7 +63,7 @@ The knob LEDs are lit brighter with higher values (but sadly on 3 steps plus off
 
 * **Send A knobs**: Controls the first send for all 8 tracks of the currently selected track page.
 * **Send B knobs**: Controls the second send for all 8 tracks of the currently selected track page.
-* **Pan/Device knobs**: Controls panorama for all 8 tracks of the currently selected track page or 8 device parameters of the currently selected parameter page of the currently selected device. This depends on the state of the *Device* button.
+* **Pan/Device knobs**: Controls panorama for all 8 tracks of the currently selected track page or parameters (either from the selected device, track parameters or project parameters). This depends on the state of the *Device* button.
 * **Faders**: Control the volume for all 8 tracks on the currently selected track page. If one of the 8 *Track Focus* buttons is pressed the function changes to controlling the volume of the first 6 send tracks, the metronome volume (fader 7) and the master volume (fader 8).
 
 ### Equalizer Mode - 2nd Factory template

diff --git a/Novation/Novation-Launchpad.md b/Novation/Novation-Launchpad.md
@@ -153,6 +153,31 @@ _Long press_ to enter birds-eye-view.
 ![Session mode diagram](Diagrams/Launchpad/session-clip-view.png)
 ![Session bird's eye view diagram](Diagrams/Launchpad/session-birds-eye-view.png)
 
+## Mix Mode
+
+Press _"Shift+Session"_ to activate Mix mode.
+
+This mode contains all session modes at once. The rows from bottom to top are:
+
+* rec arm, 
+* solo, 
+* mute, 
+* clip stop, 
+* send 2, 
+* send 1, 
+* panorama, 
+* volume.
+
+The panorama and sends pad are only colored for the selected track. Press one of the pads of the upper 4 rows to select a track. Select a volume, panorama or sends pad to activate it and then change its value with the virtual fader of the scene buttons.
+
+![Mix Mode](Diagrams/Launchpad/mix-mode.png)
+
+## Scene Play Mode
+
+Press _"Shift+Session"_ twice to activate Mix mode.
+
+In this view each pad represents 1 scene, which means that 64 scenes can be directly triggered.
+
 ## Selecting Note or Sequencer Modes
 
 Press _"Note"_ to choose a **Note** or **Sequencer** mode.
@@ -341,25 +366,6 @@ Press _"Shift+Device"_ to open the device browser to add a device after the curr
 
 ![Browser Mode](Diagrams/Launchpad/device-inst-browser.png)
 
-## Mix Mode
-
-Press _"Shift+Session"_ to activate Mix mode.
-
-This mode contains all session modes at once. The rows from bottom to top are:
-
-* rec arm, 
-* solo, 
-* mute, 
-* clip stop, 
-* send 2, 
-* send 1, 
-* panorama, 
-* volume.
-
-The panorama and sends pad are only colored for the selected track. Press one of the pads of the upper 4 rows to select a track. Select a volume, panorama or sends pad to activate it and then change its value with the virtual fader of the scene buttons.
-
-![Mix Mode](Diagrams/Launchpad/mix-mode.png)
-
 ## Tempo mode
 
 On all models, press Shift and either the arrow up or down button. On the Pro models you can also press **Shift+Device**.

diff --git a/Reaper/Changes.md b/Reaper/Changes.md
@@ -1,5 +1,22 @@
 # Changes - Cockos Reaper
 
+**24.5.1**
+
+* Requires Reaper 7.22+
+* New: Session views display now muted clips in gray or black (depending on the color capabilities of the device).
+* Fixed: Potential crash when opening the parameter mapping dialog.
+* AutoColor
+  * Fixed: Could crash on start and shutdown.
+* Kontrol Mk2/Mk3
+  * New: Added support for Kontakt 8.
+  * Fixed: Only show option to select mode-switch button on Mk3 devices.
+* LaunchControl XL
+  * New: Keep the Device button pressed and use Send Select up/down to switch between either the cursor device, track parameters or project parameters.
+* Launchpad
+  * New: Press Shift+Session twice to activate the new Scene Play view. In this view each pad represents 1 scene, which means that 64 scenes can be directly triggered.
+* MCU
+  * Fixed: Switched Shift+Press Knob in Parameter mode for selecting devices to Option+Press Knob to still be able to do fine adjustments with Shift+Knob.
+
 **24.5.0**
 
 * Requires Reaper 7.22+