When designing solutions based on the micro service architecture, we often encounter the requirement for quick and easy management of the entire system, the highest possible automation, without the necessary adjustment of individual components.
This is a real challenge and that’s why I decided to prepare a tutorial that demonstrates how to establish a micro service architecture in the simplest possible way, which can be quickly and very easily scaled and adapted to client requirements.
I did not want to interfere with the code and settings of individual services, but to control the system only with orchestrating containers in Docker.
The result is a simple micro service architecture that can be easily scaled with just a few changes in container settings, everything else is provided by Ocelot as gateway/load balancer and Consul as service discovery agent.
Such an architecture allows us redeployment of a single service without coordinating the deployment within other services. Redeployed service is automatically registered at service discovery and imediatelly available through gateway. You can imagine how big a boost this is for every development team!
Sure, using a single gateway service becomes a single point of failure to our architecture, so we need to deploy at least two instances of it to have high availability. But I will leave that problem to you to play with.
In my previous demo I showed how to implement Ocelot as service gateway and load balancer together with Eureka for a service discovery. Instead Eureka this demo uses Consul for a service discovery.
Consul is a service mesh solution providing a full featured control plane with service discovery, configuration, and segmentation functionality. Each of these features can be used individually as needed, or they can be used together to build a full service mesh. Consul requires a data plane and supports both a proxy and native integration model. Consul ships with a simple built-in proxy so that everything works out of the box, but also supports 3rd party proxy integrations such as Envoy.
The key features of Consul are:
Service Discovery: Clients of Consul can register a service, such as api or mysql, and other clients can use Consul to discover providers of a given service. Using either DNS or HTTP, applications can easily find the services they depend upon.
Health Checking: Consul clients can provide any number of health checks, either associated with a given service ("is the webserver returning 200 OK"), or with the local node ("is memory utilization below 90%"). This information can be used by an operator to monitor cluster health, and it is used by the service discovery components to route traffic away from unhealthy hosts.
KV Store: Applications can make use of Consul's hierarchical key/value store for any number of purposes, including dynamic configuration, feature flagging, coordination, leader election, and more. The simple HTTP API makes it easy to use.
Secure Service Communication: Consul can generate and distribute TLS certificates for services to establish mutual TLS connections. Intentions can be used to define which services are allowed to communicate. Service segmentation can be easily managed with intentions that can be changed in real time instead of using complex network topologies and static firewall rules.
Multi Datacenter: Consul supports multiple datacenters out of the box. This means users of Consul do not have to worry about building additional layers of abstraction to grow to multiple regions.
Consul is designed to be friendly to both the DevOps community and application developers, making it perfect for modern, elastic infrastructures.
Source: Consul introduction
A key part of the tutorial is the use of the Consul to dynamically discover service endpoints. Once a service is registered with Consul, it can be discovered using typical DNS or custom API.
Consul provides health-checks on these service instances. If one of the service instances or services itself is unhealthy or fails its health-check, the registry would then know about this and would avoid returning the service’s address. The work that the load-balancer would do is handled by the registry in this case.
Because we use multiple instances of the same service, Consul would randomly send traffic to different instances. It thus balances the load between instances of services.
Consul handles challenges of failure detection and load distribution across multiple instances of services without the necessity of deploying a centralized load balancer.
It automatically manages the registry, which is updated when any new instance of the service is registered and becomes available to receive traffic. This helps us to easily scale the services.
Before getting into implementation details how to implement self-registration to Consul, let’s look into how service discovery with self-registration really works.
In a first step a service instance registers itself to the service discovery service by providing its name, ID and address. After this gateway is able to get address of this service by querying the Consul service discovery by its name/ID.
The key thing to note here is that the service instances are registered with a unique service ID in order to disambiguate between instances of service which are running on the same Consul service agent. It is required that all services have a unique ID per node, so if names might conflict (our case) then unique IDs must be provided.
Let’s look at how we can implement self-registration in the .NET application. First, we need to read the configuration required for service discovery from environment variables, that were passed through the docker-compose.override.yml file.
public static class ServiceConfigExtensions
{
public static ServiceConfig GetServiceConfig(this IConfiguration configuration)
{
if (configuration == null)
{
throw new ArgumentNullException(nameof(configuration));
}
var serviceConfig = new ServiceConfig
{
Id = configuration.GetValue<string>("ServiceConfig:Id"),
Name = configuration.GetValue<string>("ServiceConfig:Name"),
Address = configuration.GetValue<string>("ServiceConfig:Address"),
Port = configuration.GetValue<int>("ServiceConfig:Port"),
DiscoveryAddress = configuration.GetValue<Uri>("ServiceConfig:DiscoveryAddress"),
HealthCheckEndPoint = configuration.GetValue<string>("ServiceConfig:HealthCheckEndPoint"),
};
return serviceConfig;
}
}After reading the configuration required to reach service discovery service, we can use it to register our service. The code below is implemented as a background task (hosted service), that registers the service in Consul by overriding previous information about service if such existed. If the service is shutting down, it is automatically unregistered from the Consul registry.
public class ServiceDiscoveryHostedService : IHostedService
{
private readonly IConsulClient _client;
private readonly ServiceConfig _config;
private AgentServiceRegistration _registration;
public ServiceDiscoveryHostedService(IConsulClient client, ServiceConfig config)
{
_client = client;
_config = config;
}
// Registers service to Consul registry
public async Task StartAsync(CancellationToken cancellationToken)
{
_registration = new AgentServiceRegistration
{
ID = _config.Id,
Name = _config.Name,
Address = _config.Address,
Port = _config.Port,
Check = new AgentServiceCheck()
{
DeregisterCriticalServiceAfter = TimeSpan.FromSeconds(5),
Interval = TimeSpan.FromSeconds(15),
HTTP = $"http://{_config.Address}:{_config.Port}/api/values/{_config.HealthCheckEndPoint}",
Timeout = TimeSpan.FromSeconds(5)
}
};
// Deregister already registered service
await _client.Agent.ServiceDeregister(_registration.ID, cancellationToken).ConfigureAwait(false);
// Registers service
await _client.Agent.ServiceRegister(_registration, cancellationToken).ConfigureAwait(false);
}
// If the service is shutting down it deregisters service from Consul registry
public async Task StopAsync(CancellationToken cancellationToken)
{
await _client.Agent.ServiceDeregister(_registration.ID, cancellationToken).ConfigureAwait(false);
}
}Finally, we need to register our configuration and hosted service with Consul dependencies to dependency injection container. To do this, we use a simple extension method that can be shared within our services:
public static class ServiceDiscoveryExtensions
{
public static void AddConsul(this IServiceCollection services, ServiceConfig serviceConfig)
{
if (serviceConfig == null)
{
throw new ArgumentNullException(nameof(serviceConfig));
}
var consulClient = new ConsulClient(config =>
{
config.Address = serviceConfig.DiscoveryAddress;
});
services.AddSingleton(serviceConfig);
services.AddSingleton<IConsulClient, ConsulClient>(_ => consulClient);
services.AddSingleton<IHostedService, ServiceDiscoveryHostedService>();
}
}Once we have registered our services in the service discovery service, we can start implementing the Gateway API.
Ocelot requires that you provide a configuration file that contains a list of Routes (configuration used to map upstream request) and a GlobalConfiguration (other configuration like QoS, Rate limiting, etc.). In the ocelot.json file below, you can see how we forward HTTP requests. We have to specify which type of load balancer we will use, in our case this is a “RoundRobin” which loops through available services and sends requests to available services. It is important to set the Consul as a service discovery service in GlobalConfiguration for ServiceDiscoveryProvider.
{
"Routes": [
{
"Servicename": "ValueService",
"DownstreamPathTemplate": "/{url}",
"DownstreamScheme": "http",
"UpstreamPathTemplate": "/{url}",
"UpstreamHttpMethod": [ "GET" ],
"UseServiceDiscovery": true,
"RouteIsCaseSensitive": false,
"LoadBalancerOptions": {
"Type": "RoundRobin"
},
"QoSOptions": {
"ExceptionsAllowedBeforeBreaking": 3,
"DurationOfBreak": 5000,
"TimeoutValue": 2000
}
}
],
"GlobalConfiguration": {
"RequestIdKey": "OcRequestId",
"UseServiceDiscovery": true,
"ServiceDiscoveryProvider": {
"Host": "consul",
"Port": 8500,
"Type": "PollConsul",
"PollingInterval": 100
}
}
}Here are some necessary explanations for ServiceDiscoveryProvider settings in the GlobalConfiguration section:
- Host - the host of Consul
- Port - the port of Consul
- Type
- Consul, means that Ocelot will get service information from consul per request
- PollConsul, means that Ocelot will poll Consul for latest service information
- PollingInterval - tells Ocelot how often to call Consul for changes in the service registry
After we have defined our configuration we can start to implement API Gateway based on .NET 5 and Ocelot. Below we can see the implementation of Ocelot API Gateway service, that uses our ocelot.json configuration file and Consul as a service registry.
public class Program
{
public static void Main(string[] args)
{
CreateHostBuilder(args).Build().Run();
}
public static IHostBuilder CreateHostBuilder(string[] args) =>
Host.CreateDefaultBuilder(args)
.UseContentRoot(Directory.GetCurrentDirectory())
.ConfigureWebHostDefaults(webBuilder =>
{
webBuilder.UseStartup<Startup>();
})
.ConfigureAppConfiguration((hostingContext, config) =>
{
config
.SetBasePath(hostingContext.HostingEnvironment.ContentRootPath)
.AddJsonFile("appsettings.json", false, true)
.AddJsonFile($"appsettings.{hostingContext.HostingEnvironment.EnvironmentName}.json", true, true)
.AddJsonFile("ocelot.json", false, false)
.AddEnvironmentVariables();
})
.ConfigureLogging((builderContext, logging) =>
{
logging.AddConfiguration(builderContext.Configuration.GetSection("Logging"));
logging.AddConsole();
logging.AddDebug();
logging.AddEventSourceLogger();
});
}public class Startup
{
private const string SERVICE_NAME = "ValueService.OpenApi";
public Startup(IConfiguration configuration)
{
Configuration = configuration;
}
public IConfiguration Configuration { get; }
public void ConfigureServices(IServiceCollection services)
{
services.AddConsul(Configuration.GetServiceConfig());
services.AddHttpContextAccessor();
services.AddControllers();
services.AddCors();
services.AddRouting(options => options.LowercaseUrls = true);
}
public void Configure(IApplicationBuilder app, IWebHostEnvironment env)
{
app.UseRouting();
if (env.IsDevelopment())
{
app.UseDeveloperExceptionPage();
}
else
{
app.UseHsts();
}
app.UseRouting();
app.UseStaticFiles();
app.UseEndpoints(endpoints =>
{
endpoints.MapControllers();
endpoints.MapGet("/", async context =>
{
await context.Response.WriteAsync(SERVICE_NAME);
});
});
}
}As mention before, we will containerize all services with Docker, including Consul, using Lightweight GNU/Linux distributions for containers.
docker-compose.yml file with setup for all the containers looks like this:
version: '3.9'
services:
consul:
image: consul:latest
command: consul agent -dev -log-level=warn -ui -client=0.0.0.0
hostname: consul
container_name: consul
networks:
- common_network
valueservice1.openapi:
container_name: valueservice1.openapi
image: valueservice.openapi:latest
restart: on-failure
hostname: valueservice1.openapi
build:
context: .
dockerfile: src/ValueService.OpenApi/Dockerfile
networks:
- common_network
valueservice2.openapi:
container_name: valueservice2.openapi
image: valueservice.openapi:latest
restart: on-failure
hostname: valueservice2.openapi
build:
context: .
dockerfile: src/ValueService.OpenApi/Dockerfile
networks:
- common_network
valueservice3.openapi:
container_name: valueservice3.openapi
image: valueservice.openapi:latest
restart: on-failure
hostname: valueservice3.openapi
build:
context: .
dockerfile: src/ValueService.OpenApi/Dockerfile
networks:
- common_network
services.gateway:
container_name: services.gateway
image: services.gateway:latest
restart: on-failure
hostname: services.gateway
build:
context: .
dockerfile: src/Services.Gateway/Dockerfile
networks:
- common_network
networks:
common_network:
driver: bridgeNote that our services doesn’t contain any confuguration files, for that purpose we are going to use Docker-compose.override.yml file:
version: '3.9'
services:
consul:
ports:
- "8500:8500"
valueservice1.openapi:
environment:
- ASPNETCORE_ENVIRONMENT=Development
- ServiceConfig__Id=ValueService.OpenApi-9100
- ServiceConfig__Name=ValueService
- ServiceConfig__DiscoveryAddress=http://consul:8500
- ServiceConfig__Address=valueservice1.openapi
- ServiceConfig__Port=80
- ServiceConfig__HealthCheckEndPoint=healthcheck
ports:
- 9100:80
depends_on:
- consul
valueservice2.openapi:
environment:
- ASPNETCORE_ENVIRONMENT=Development
- ServiceConfig__Id=ValueService.OpenApi-9200
- ServiceConfig__Name=ValueService
- ServiceConfig__DiscoveryAddress=http://consul:8500
- ServiceConfig__Address=valueservice2.openapi
- ServiceConfig__Port=80
- ServiceConfig__HealthCheckEndPoint=healthcheck
ports:
- 9200:80
depends_on:
- consul
valueservice3.openapi:
environment:
- ASPNETCORE_ENVIRONMENT=Development
- ServiceConfig__Id=ValueService.OpenApi-9300
- ServiceConfig__Name=ValueService
- ServiceConfig__DiscoveryAddress=http://consul:8500
- ServiceConfig__Address=valueservice3.openapi
- ServiceConfig__Port=80
- ServiceConfig__HealthCheckEndPoint=healthcheck
ports:
- 9300:80
depends_on:
- consul
services.gateway:
environment:
- ASPNETCORE_ENVIRONMENT=Development
- ASPNETCORE_URLS=http://+:80
ports:
- 9500:80
depends_on:
- consul
- valueservice1.openapi
- valueservice2.openapi
- valueservice3.openapiTo execute compose file, open Powershell, and navigate to the compose file in the root folder. Then execute the following command: docker-compose up -d --build which starts and runs all services. The -d parameter executes the command detached. This means that the containers run in the background and don’t block your Powershell window. To check all running containers use command docker ps.
The Consul offers a nice web user interface right out of the box. You can access it on port 8500 (http://localhost:8500). Let’s look at some of the screens.
The home page for the Consul UI services with all the relevant information related to a Consul agent and web service check.
Let’s make several calls through API Gateway http://localhost:9500/api/values. Load balancer will loop through available services and send requests and return responses:
Micro service systems are not easy to build and maintain. But this tutorial showed how easy it is to develop and deploy an application with microservice architecture. HashiCorp Consul has first-class support for service discovery, health-check, key-value storage and multi-data centers. Ocelot as a gateway successfuly comunicates with Consul service registry and retrives service registrations, load balancer loops through available services and sends requests. Using both makes life significantly easier for developers facing such challenges. Do you agree?
Enjoy!
- Visual Studio 2022 17.2.6 or greater
- .NET SDK 6.0
- Docker