[target] add FLYCOLORF7 (#1045)

src/main/target/FLYCOLORF7/target.c

@@ -0,0 +1,47 @@
+/*
+ * This file is part of EmuFlight. It is derived from Betaflight.
+ *
+ * This is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * This software is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// This resource file generated using https://github.com/nerdCopter/target-convert
+// Commit: 522aa66
+
+#include <stdint.h>
+#include "platform.h"
+#include "drivers/io.h"
+#include "drivers/dma.h"
+#include "drivers/timer.h"
+#include "drivers/timer_def.h"
+
+const timerHardware_t timerHardware[USABLE_TIMER_CHANNEL_COUNT] = {
+    DEF_TIM(TIM3, CH4, PB1, TIM_USE_MOTOR, 0, 0), // motor 1
+    DEF_TIM(TIM3, CH1, PB4, TIM_USE_MOTOR, 0, 0), // motor 2
+    DEF_TIM(TIM2, CH2, PB3, TIM_USE_MOTOR, 0, 0), // motor 3
+    DEF_TIM(TIM2, CH1, PA15, TIM_USE_MOTOR, 0, 0), // motor 4
+    DEF_TIM(TIM8, CH3, PC8, TIM_USE_MOTOR, 0, 0), // motor 5
+    DEF_TIM(TIM8, CH4, PC9, TIM_USE_MOTOR, 0, 0), // motor 6
+    DEF_TIM(TIM8, CH1, PC6, TIM_USE_PPM, 0, 0), // ppm RX_PPM_PIN
+    DEF_TIM(TIM1, CH1, PA8, TIM_USE_LED, 0, 0), // led
+    DEF_TIM(TIM4, CH3, PB8, TIM_USE_ANY, 0, 0), // cam ctrl
+    DEF_TIM(TIM2, CH3, PB10, TIM_USE_ANY, 0, 0), // could not determine TIM_USE_xxxxx - please check
+    DEF_TIM(TIM5, CH3, PA2, TIM_USE_ANY, 0, 0), // could not determine TIM_USE_xxxxx - please check
+    DEF_TIM(TIM5, CH4, PA3, TIM_USE_ANY, 0, 1), // could not determine TIM_USE_xxxxx - please check
+};
+
+// notice - this file was programmatically generated and may be incomplete.

src/main/target/FLYCOLORF7/target.h

@@ -0,0 +1,148 @@
+/*
+ * This file is part of EmuFlight. It is derived from Betaflight.
+ *
+ * This is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ * This software is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// This resource file generated using https://github.com/nerdCopter/target-convert
+// Commit: 522aa66
+
+#pragma once
+
+#define BOARD_NAME        FLYCOLORF7
+#define MANUFACTURER_ID   FLCO
+#define TARGET_BOARD_IDENTIFIER "S7X2"  // generic ID
+#define FC_TARGET_MCU     STM32F7X2     // not used in EmuF
+
+#define USE_ACC
+#define USE_ACC_SPI_MPU6000
+#define USE_GYRO
+#define USE_GYRO_SPI_MPU6000
+#define USE_FLASH
+#define USE_FLASH_W25Q128FV
+#define USE_MAX7456
+
+#define USE_VCP
+#define USE_FLASHFS
+#define USE_FLASH_M25P16    // 16MB Micron M25P16 driver; drives all unless QSPI
+#define USE_OSD
+
+#define USE_LED
+#define LED0_PIN             PC15
+#define LED_STRIP_PIN        PA8
+#define USE_BEEPER
+#define BEEPER_PIN           PC14
+#define BEEPER_INVERTED
+#define CAMERA_CONTROL_PIN   PB8
+
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN         PA5
+#define SPI1_MISO_PIN        PA6
+#define SPI1_MOSI_PIN        PA7
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN         PB13
+#define SPI2_MISO_PIN        PB14
+#define SPI2_MOSI_PIN        PB15
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN         PC10
+#define SPI3_MISO_PIN        PC11
+#define SPI3_MOSI_PIN        PB5
+
+#define USE_SPI_GYRO
+#define USE_EXTI
+#define USE_GYRO_EXTI
+
+#define USE_MPU_DATA_READY_SIGNAL
+
+#define ACC_1_ALIGN          CW180_DEG_FLIP
+#define GYRO_1_ALIGN         CW180_DEG_FLIP
+#define GYRO_1_CS_PIN        PA4
+#define GYRO_1_EXTI_PIN      PC3
+#define GYRO_1_SPI_INSTANCE SPI1
+
+#define USE_DUAL_GYRO
+
+#define ACC_2_ALIGN          CW270_DEG
+#define GYRO_2_ALIGN         CW270_DEG
+#define GYRO_2_CS_PIN        PB2
+#define GYRO_2_EXTI_PIN      PC4
+#define GYRO_2_SPI_INSTANCE SPI1
+
+
+#define USE_UART1
+#define UART1_TX_PIN         PA9
+#define UART1_RX_PIN         PA10
+#define USE_UART2
+#define UART2_TX_PIN         PA2
+#define UART2_RX_PIN         PA3
+#define USE_UART3
+#define UART3_TX_PIN         PB10
+#define UART3_RX_PIN         PB11
+#define USE_UART4
+#define UART4_TX_PIN         PA0
+#define UART4_RX_PIN         PA1
+#define USE_UART5
+#define UART5_TX_PIN         PC12
+#define UART5_RX_PIN         PD2
+#define USE_UART6
+#define UART6_TX_PIN         PC6
+#define UART6_RX_PIN         PC7
+#define SERIAL_PORT_COUNT 7
+
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C_DEVICE_1      (I2CDEV_1)
+#define MAG_I2C_INSTANCE (I2CDEV_1)
+#define I2C1_SCL PB6
+#define I2C1_SDA PB7
+
+#define FLASH_CS_PIN         PC13
+#define FLASH_SPI_INSTANCE SPI3
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+#define MAX7456_SPI_CS_PIN   PB12
+#define MAX7456_SPI_INSTANCE SPI2
+
+#define USE_ADC
+#define VBAT_ADC_PIN PC1
+#define CURRENT_METER_ADC_PIN PC0
+#define RSSI_ADC_PIN PC2
+#define ADC3_DMA_OPT        1
+#define ADC3_DMA_STREAM DMA2_Stream1 //# ADC 3: DMA2 Stream 1 Channel 2
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define DEFAULT_CURRENT_METER_SCALE 170
+#define ADC_INSTANCE ADC3
+
+#define ENABLE_DSHOT_DMAR true
+
+#define PINIO1_PIN           PB0
+#define PINIO2_PIN           PB9
+#define PINIO1_BOX 40
+#define PINIO2_BOX 41
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+// notice - masks were programmatically generated - please verify last port group for 0xffff or (BIT(2))
+
+#define DEFAULT_FEATURES       (FEATURE_OSD | FEATURE_TELEMETRY | FEATURE_AIRMODE | FEATURE_RX_SERIAL)
+#define DEFAULT_RX_FEATURE     FEATURE_RX_SERIAL
+
+#define USABLE_TIMER_CHANNEL_COUNT 12
+#define USED_TIMERS ( TIM_N(1) | TIM_N(2) | TIM_N(3) | TIM_N(4) | TIM_N(5) | TIM_N(8) )
+
+// notice - this file was programmatically generated and may be incomplete.

src/main/target/FLYCOLORF7/target.mk

@@ -0,0 +1,13 @@
+F7X2RE_TARGETS += $(TARGET)
+FEATURES       += VCP ONBOARDFLASH
+
+TARGET_SRC = \
+drivers/accgyro/accgyro_spi_mpu6000.c \
+$(addprefix drivers/compass/,$(notdir $(wildcard $(SRC_DIR)/drivers/compass/*.c))) \
+drivers/light_led.h \
+drivers/light_ws2811strip.c \
+drivers/pinio.c \
+drivers/max7456.c \
+
+# This resource file generated using https://github.com/nerdCopter/target-convert
+# Commit: 522aa66