Note: This repository has been moved to our GitLab page on May 2019, and will not receive any updates or be monitored. Please follow this link to go to the new repository: https://gitlab.com/electronutlabs-public/ElectronutLabs-blip
Blip is a development board for Bluetooth Low Energy (BLE) and 802.15.4 based wireless applications, based on the Nordic Semiconductor nRF52840 SoC. It has a Black Magic Probe compatible programmer and debugger built in, along with temperature/humidity sensor, ambient light intensity sensor, and a 3-axis accelerometer. It can be used to prototype very low power devices. It also has provision for an SD card slot, which makes it a complete and versatile development board.
- Raytac MDBT50Q-1M module based on Nordic Semiconductor's nRF52840
- LIS2DDH12 High-performance 3-axis "femto" accelerometer
- Optical Sensor LTR-329ALS-01
- Si7006-A20 I2C humidity and temperature sensor
- On board STM32F103CBT6 as Black magic probe debugger
- NFC Antenna
- MicroSD slot
- Power Supply: USB, JST connector for Li-ion/Li-po
- BQ24079 battery charging and power management IC
Maximum Input Voltage
- USB powered : 5V
- Vext = 1.8V to 3.3V
- Vbat = Lithium ion/polymer 3.7/4.2V battery
Power Ratings
- Max battery charging current : 150mA
- When powering with Vext, the debugger, charging IC, and LDO are bypassed for low current consumption
You can find the schematic and datasheet in the links below:
You can find sample firmware, datasheet, images etc. on its repository.
Currently you can pre-order Blip by visiting this page - Blip pre-order. Please email us at [email protected] if you have any questions.
Electronut Labs is an Embedded Systems company based in Bangalore, India. More information at our website.