More config updates from IO devops team changes, and bump dbsync bina…

…ry to 13.2.0.2 (CI version for now)

docs/Build/node-cli.md

@@ -91,19 +91,20 @@ Press Ctrl-C to exit node and return to console.
 Now that you've tested the basic node operation, you might want to customise your config files (assuming you are in top-level folder , i.e. `cd "${CNODE_HOME}"`) :
 
 1. files/config.json :
-This file contains the logging configurations (tracers of to tune logging, paths for other genesis config files, address/ports on which the prometheus/EKG monitoring will listen, etc). Unless running more than one node on same machine (not recommended), you should be alright to use this file as-is.
+This file contains the logging configurations (tracers of to tune logging, paths for other genesis config files, address/ports on which the prometheus/EKG monitoring will listen, etc). Unless running more than one node on same machine (not recommended), you should be alright to use most of this file as-is. You might - however - want to double-check `PeerSharing` in this file, if using a relay node where you'd like connecting peers (marked as `"advertise": "true"` in topology.json) to be shared , you may turn this setting to `true`.
 
 2. files/topology.json :
 This file tells your node how to connect to other nodes (especially initially to start synching). You would want to update this file as below:
 
     * Update the `localRoots` > `accessPoints` section to include your local nodes that you want persistent connection against (eg: this could be your BP and own relay nodes) against definition where `trustable` is set to `true`.
-    * You'd want to update `localRoots` > `valency` to number of connections from your localRoots that you always want to keep active connection to.
+    * If you want specific peers to be advertised on the network for discovery, you may set `advertise` to `true` for that peer group. You do NOT want to do that on BP
+    * You'd want to update `localRoots` > `valency` (`valency` is the same as `hotValency`, not yet replaced since the example in cardano-node-wiki repo still suggests `valency`) to number of connections from your localRoots that you always want to keep active connection to for that node.
     * [Optional] - you can add/remove nodes from `publicRoots` section as well as `localRoots` > `accessPoints` as desired, tho defaults populated should work fine. On mainnet, we did add a few additional nodes to help add more redundancy for initial sync.
     * `useLedgerAfterSlot` tells the node to establish networking with nodes from defined peers to sync the node initially until reaching an absolute slot number, after which - it can start attempting to connect to peers registered as pool relays on the network. You may want this number to be relatively recent (eg: not have it 50 epochs old).
     * You can read further about topology file configuration [here](https://github.com/input-output-hk/cardano-node-wiki/blob/main/docs/getting-started/understanding-config-files.md#the-p2p-topologyjson-file)
 
 !!! important
-    You'd want to set `useLedgerAfterSlot` to `-1` for your Block Producing (Core) node - thereby, telling your Core node to remain in non-P2P mode.
+    On BP, You'd want to set `useLedgerAfterSlot` to `-1` for your Block Producing (Core) node - thereby, telling your Core node to remain in non-P2P mode, and ensure `PeerSharing` is to `false`.
 
 The resultant topology file could look something like below:
 

files/configs/guild/config.json

@@ -3,21 +3,21 @@
   "ByronGenesisFile": "/opt/cardano/cnode/files/byron-genesis.json",
   "ConwayGenesisFile": "/opt/cardano/cnode/files/conway-genesis.json",
   "EnableP2P": true,
-  "ExperimentalHardForksEnabled": false,
-  "ExperimentalProtocolsEnabled": false,
   "LastKnownBlockVersion-Alt": 0,
   "LastKnownBlockVersion-Major": 3,
   "LastKnownBlockVersion-Minor": 1,
+  "MinNodeVersion": "8.9.2",
+  "PeerSharing": true,
   "Protocol": "Cardano",
   "RequiresNetworkMagic": "RequiresMagic",
   "PBftSignatureThreshold": 1,
   "ShelleyGenesisFile": "/opt/cardano/cnode/files/shelley-genesis.json",
+  "EnableLogging": true,
+  "EnableLogMetrics": false,
   "TargetNumberOfActivePeers": 10,
   "TargetNumberOfEstablishedPeers": 25,
   "TargetNumberOfKnownPeers": 50,
-  "TargetNumberOfRootPeers": 50,
-  "EnableLogging": true,
-  "EnableLogMetrics": false,
+  "TargetNumberOfRootPeers": 25,
   "TraceAcceptPolicy": true,
   "TraceBlockFetchClient": true,
   "TraceBlockFetchDecisions": false,

files/configs/mainnet/config.json

@@ -7,6 +7,8 @@
   "LastKnownBlockVersion-Major": 3,
   "LastKnownBlockVersion-Minor": 0,
   "MaxKnownMajorProtocolVersion": 2,
+  "MinNodeVersion": "8.9.2",
+  "PeerSharing": false,
   "Protocol": "Cardano",
   "RequiresNetworkMagic": "RequiresNoMagic",
   "ShelleyGenesisFile": "/opt/cardano/cnode/files/shelley-genesis.json",
@@ -15,7 +17,7 @@
   "TargetNumberOfActivePeers": 20,
   "TargetNumberOfEstablishedPeers": 50,
   "TargetNumberOfKnownPeers": 100,
-  "TargetNumberOfRootPeers": 100,
+  "TargetNumberOfRootPeers": 60,
   "TraceAcceptPolicy": true,
   "TraceBlockFetchClient": true,
   "TraceBlockFetchDecisions": false,

files/configs/mainnet/topology.json

@@ -17,7 +17,6 @@
       ],
       "advertise": false,
       "trustable": true,
-	    "valency_INFO": "set the .localRoots.valency to the number of configured accessPoints",
       "valency": 2
     },
     {
@@ -46,6 +45,5 @@
       "advertise": false
     }
   ],
-  "useLedgerAfterSlot_INFO": "the node will use the .publicRoots.accessPoints only until he synchronised up to slot .useLedgerAfterSlot. then P2P peering jumps in, plus static links to .localRoots.accessPoints",
   "useLedgerAfterSlot": 119160667
 }

files/configs/preprod/config.json

@@ -6,6 +6,8 @@
   "LastKnownBlockVersion-Alt": 0,
   "LastKnownBlockVersion-Major": 2,
   "LastKnownBlockVersion-Minor": 0,
+  "MinNodeVersion": "8.9.2",
+  "PeerSharing": false,
   "Protocol": "Cardano",
   "RequiresNetworkMagic": "RequiresMagic",
   "ShelleyGenesisFile": "/opt/cardano/cnode/files/shelley-genesis.json",
@@ -14,7 +16,7 @@
   "TargetNumberOfActivePeers": 20,
   "TargetNumberOfEstablishedPeers": 50,
   "TargetNumberOfKnownPeers": 100,
-  "TargetNumberOfRootPeers": 100,
+  "TargetNumberOfRootPeers": 60,
   "TraceAcceptPolicy": true,
   "TraceBlockFetchClient": true,
   "TraceBlockFetchDecisions": false,

files/configs/preview/config.json

@@ -8,19 +8,21 @@
   "LastKnownBlockVersion-Alt": 0,
   "LastKnownBlockVersion-Major": 3,
   "LastKnownBlockVersion-Minor": 1,
+  "MinNodeVersion": "8.9.2",
+  "PeerSharing": false,
   "Protocol": "Cardano",
   "RequiresNetworkMagic": "RequiresMagic",
   "ShelleyGenesisFile": "/opt/cardano/cnode/files/shelley-genesis.json",
+  "EnableLogging": true,
+  "EnableLogMetrics": false,
   "TargetNumberOfActivePeers": 20,
   "TargetNumberOfEstablishedPeers": 50,
   "TargetNumberOfKnownPeers": 100,
-  "TargetNumberOfRootPeers": 100,
+  "TargetNumberOfRootPeers": 60,
   "TestAllegraHardForkAtEpoch": 0,
   "TestAlonzoHardForkAtEpoch": 0,
   "TestMaryHardForkAtEpoch": 0,
   "TestShelleyHardForkAtEpoch": 0,
-  "EnableLogging": true,
-  "EnableLogMetrics": false,
   "TraceAcceptPolicy": true,
   "TraceBlockFetchClient": true,
   "TraceBlockFetchDecisions": false,

files/configs/sanchonet/config.json

@@ -8,19 +8,21 @@
   "LastKnownBlockVersion-Alt": 0,
   "LastKnownBlockVersion-Major": 3,
   "LastKnownBlockVersion-Minor": 1,
+  "MinNodeVersion": "8.10.0",
+  "PeerSharing": false,
   "Protocol": "Cardano",
   "RequiresNetworkMagic": "RequiresMagic",
   "ShelleyGenesisFile": "/opt/cardano/cnode/files/shelley-genesis.json",
+  "EnableLogging": true,
+  "EnableLogMetrics": false,
   "TargetNumberOfActivePeers": 20,
   "TargetNumberOfEstablishedPeers": 50,
   "TargetNumberOfKnownPeers": 100,
-  "TargetNumberOfRootPeers": 100,
+  "TargetNumberOfRootPeers": 60,
   "TestAllegraHardForkAtEpoch": 0,
   "TestAlonzoHardForkAtEpoch": 0,
   "TestMaryHardForkAtEpoch": 0,
   "TestShelleyHardForkAtEpoch": 0,
-  "EnableLogging": true,
-  "EnableLogMetrics": false,
   "TraceAcceptPolicy": true,
   "TraceBlockFetchClient": true,
   "TraceBlockFetchDecisions": false,

scripts/cnode-helper-scripts/guild-deploy.sh

@@ -364,7 +364,7 @@ build_libblst() {
 }
 
 # Download cardano-node, cardano-cli, cardano-db-sync, bech32 and cardano-submit-api
-# TODO: Replace these with self-hosted ones (potentially consider IPFS as upload destination for CI)
+# TODO: Replace these with self-hosted ones (potentially consider snapshots.koios.rest as upload destination for CI)
 download_cnodebins() {
   [[ -z ${ARCH##*aarch64*} ]] && err_exit "  The build archives are not available for ARM, you might need to build them!"
   echo -e "\nDownloading binaries.."
@@ -382,7 +382,9 @@ download_cnodebins() {
   [[ -f cardano-address ]] || err_exit " cardano-address archive downloaded but binary (bin/cardano-address) not found after extracting package!"
   if [[ "${SKIP_DBSYNC_DOWNLOAD}" == "N" ]]; then
     echo -e "\n  Downloading Cardano DB Sync archive created from GitHub.."
-    curl -m 200 -sfL https://github.com/IntersectMBO/cardano-db-sync/releases/download/sancho-4-2-1/cardano-db-sync-13.2.0.1-linux.tar.gz -o cnodedbsync.tar.gz || err_exit "  Could not download cardano-db-sync release 13.2.0.0 from GitHub!"
+    # TODO: Replace CI Build artifact against 13.2.0.2 tag with release from github artefacts once available
+    #curl -m 200 -sfL https://github.com/IntersectMBO/cardano-db-sync/releases/download/13.2.0.2/cardano-db-sync-13.2.0.1-linux.tar.gz -o cnodedbsync.tar.gz || err_exit "  Could not download cardano-db-sync release 13.2.0.2 from GitHub!"
+    curl -m 200 -sfL https://ci.iog.io/build/3735786/download/1/cardano-db-sync-13.2.0.2-linux.tar.gz -o cnodedbsync.tar.gz || err_exit "  Could not download cardano-db-sync release 13.2.0.2 from GitHub!"
     tar zxf cnodedbsync.tar.gz --strip-components 1 ./cardano-db-sync &>/dev/null
     [[ -f cardano-db-sync ]] || err_exit " cardano-db-sync archive downloaded but binary (cardano-db-sync) not found after extracting package!"
     rm -f cnodedbsync.tar.gz