[TEST] initramfs-framework: Do not fail if device unlocked #1130
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
alexgg
force-pushed
the
alexgg/no-is-secured-check
branch
from
b9e963a to
f5a5e07
Compare
alexgg
force-pushed
the
alexgg/no-is-secured-check
branch
from
3199946 to
d985502
Compare
…e USB boot With this change the device will first attempt to boot from USB and then boot from the NVME/internal eMMC/SD card. This allows to use USB flasher images as provisioning tools in preference of usbboot. 5: USB 2.0 boot from USB type A socket (CM4) or Type C socket (RPI4) 6: NVME 1: eMMC / SD Card 2: Network boot We place NVME before eMMC/SDcard as there are reports that NVME is not working if initialized after. Also, there is no USB mass storage boot to limit this option to using physical jumper configuration. See https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#BOOT_ORDER Note that trying USB boot first adds a considerable delay to the boot process as the CM4 has a timeout of 2s (5s if extended via `program_usb_boot_timeout=1` per USB port enumeration. As such, this change is only done to the `raspberrypicm4-ioboard-sb` that requires USB boot for the secure boot provisioning flow. Changelog-entry: Modify boot order to prioritize USB boot Signed-off-by: Alex Gonzalez <[email protected]>
This is useful for the use case of a flasher image ran from external media, like in the traditional flasher workflow that expects the device to shutdown after programming. From https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#POWER_OFF_ON_HALT Changelog-entry: configure to power off on halt for raspberrypicm4-ioboard-sb Signed-off-by: Alex Gonzalez <[email protected]>
As CM4 and CM4IO don’t include the external USB 3 controller, set `otg_mode=1` for better performance as done in Raspberrypi OS. See https://www.raspberrypi.com/documentation/computers/config_txt.html#otg_mode-raspberry-pi-4-only Changelog-entry: enable USB 2.0 for CM4 Signed-off-by: Alex Gonzalez <[email protected]>
alexgg
force-pushed
the
alexgg/no-is-secured-check
branch
from
d985502 to
c88da74
Compare
This allows to build with newer host dockers. Signed-off-by: Alex Gonzalez <[email protected]>
For testing purpose, the `OS_DEVELOPMENT` compilation switch will make the device not crash when booting an unlocked device. Signed-off-by: Alex Gonzalez <[email protected]>
This allows to test with unlocked devices Signed-off-by: Alex Gonzalez <[email protected]>
alexgg
force-pushed
the
alexgg/no-is-secured-check
branch
from
c88da74 to
6edf126
Compare
|
Project paused - this was just used for development. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
For testing purpose, the
OS_DEVELOPMENTcompilation switch will make the device not crash when booting an unlocked device.