Wifi For Pi

The purpose of this module is to provide tools to connect to a Wifi

Table of Contents

• Installation - How to install the module
• API - Commands available
  • check(ssid, callback) - State of the network with the specified ssid
  • connectTo(details, callback) - State of the network with the specified ssid
  • connectToId(networkId, callback) - Connects to a network with the parameters specified (This can connect to open and secure networks including 802.1x)
  • connect(ssid, password, callback) - Connects to a network with the ssid specified using the password provided
  • connectOpen(ssid, callback) - Connects to an open network with the ssid specified
  • connectEAP(ssid, password, callback) - Connects to a network with the ssid specified using the password provided
  • disconnect(callback) - Disconnects from the network on the current interface
  • detectSupplicant(callback) - Looks for a running wpa_supplicant process and if so returns the config file and interface used
  • interfaceDown(callback) - Drops the interface provided
  • interfaceUp(callback) - Raises the interface provided
  • killSupplicant(callback) - Kills the supplicant process for the specified interface
  • listInterfaces(callback) - List the available interface names in an array
  • listNetworks(callback) - List the networks in an array, each network has Network ID, SSID, BSSID and FLAGS
  • restartInterface(callback) - Restarts the interface provided
  • scan(callback) - Scan available wifi networks
  • setCurrentInterface(iface) - Specify the interface to use
  • startSupplicant(callback) - Starts a wpa_supplicant instance
  • status(iface, callback) - Show status parameters of the interface specified, if no interface is provided the selected one is used
• Notes

Installation

On your project root execute:

$ npm install --save pi-wifi

API

The following is the list of functions available:

check(ssid, callback)

The check function is used to return the state of the network with the specified ssid

var piWifi = require('pi-wifi');

piWifi.check('myTestNetwork', function(err, result) {
  if (err) {
    return console.error(err.message);
  }
  console.log(result);
});

// => If everything is working
// { selected: true, connected: true, ip: '192.168.0.12' }
// => Alternatively
// { selected: false, connected: false }

connectTo(details, callback)

The connectTo function is used to connect to a network with the parameters specified (This can connect to open and secure networks including 802.1x)

The details object can contain the following:

• key_mgmt You can specify the type of security to use. (Optional)
• ssid (required for secure and enterprise networks)
• username (required for enterprise networks)
• password (required for enterprise networks)
• eap
• phase1
• phase2

var piWifi = require('pi-wifi');

var networkDetails = {
  ssid: 'MyNetwork',
  username: 'demo',
  password: 'swordfish'
};

//A simple connection
piWifi.connectTo(networkDetails, function(err) {
  if(!err) {
    console.log('Network created successfully!');
  } else {
    console.log(err.message); //Failed to connect
  }
});

//After creating a succesful connection, you could use the function check to verify
var ssid = 'MyOpenNetwork';
piWifi.connectTo({ssid: ssid}}, function(err) {
  if (!err) { //Network created correctly
    setTimeout(function () {
      piwifi.check(ssid, function (err, status) {
        if (!err && status.connected) {
          console.log('Connected to the network ' + ssid + '!');
        } else {
          console.log('Unable to connect to the network ' + ssid + '!');
        }
      });
    }, 2000);
  } else {
    console.log('Unable to create the network ' + ssid + '.');
  }
});

connectToId(networkId, callback)

The connectToId function is used enables the network, saves the configuration and then select the network with the id provided

var piWifi = require('pi-wifi');

piWifi.connectToId(2, function(err) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Successful connection!');
});

connect(ssid, password, callback)

The connect function is used to connect to a network with the ssid specified using the password provided (Avoid using this as it is only for backwards compatibility and may be deprecated in the future)

var piWifi = require('pi-wifi');

piWifi.connect('myTestNetwork', 'MyTestPassword', function(err) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Successful connection!');
});

connectOpen(ssid, callback)

The connectOpen function is used to connect to an open network with the ssid specified (Avoid using this as it is only for backwards compatibility and may be deprecated in the future)

var piWifi = require('pi-wifi');

piWifi.connectOpen('myTestNetwork', function(err) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Successful connection!');
});

connectEAP(ssid, password, callback)

The connectEAP function is used to connect to a network with the ssid specified using the password provided (Avoid using this as it is only here for consistency and may be deprecated in the future)

var piWifi = require('pi-wifi');

piWifi.connectEAP('myTestNetwork', 'MyTestUsername', 'MyTestPassword', function(err) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Successful connection!');
});

disconnect(callback)

The disconnect function is used to disconnect from the network on the current interface

var piWifi = require('pi-wifi');

piWifi.disconnect(function(err) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Disconnected from network!');
});

detectSupplicant(callback)

The detectSupplicant function is used to look for a running wpa_supplicant process and if found returns the config file and interface used

var piWifi = require('pi-wifi');

piWifi.detectSupplicant(function(err, iface, configFile) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Supplicant running in interface', iface, 'using the configuration file', configFile);
});

interfaceDown(callback)

The interfaceDown function is used to drop the interface provided

var piWifi = require('pi-wifi');

piWifi.interfaceDown('wlan0', function(err) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Interface dropped succesfully!');
});

interfaceUp(callback)

The interfaceUp function is used to raise the interface provided

var piWifi = require('pi-wifi');

piWifi.interfaceUp('wlan0', function(err) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Interface raised succesfully!');
});

killSupplicant(callback)

The killSupplicant function is used to kill the supplicant process for the specified interface

var piWifi = require('pi-wifi');

piWifi.killSupplicant('wlan0', function(err) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Supplicant process terminated!');
});

listInterfaces(callback)

The listInterfaces function is used to list the available network interfaces' names

var piWifi = require('pi-wifi');

piWifi.listInterfaces(function(err, interfacesArray) {
  if (err) {
    return console.error(err.message);
  }
  console.log(interfacesArray);
});

// =>
// ['wlan0', 'wlan1']

listNetworks(callback)

The listNetworks function is used to list the networks in an array, each network has Network ID, SSID, BSSID and FLAGS

var piWifi = require('pi-wifi');

piWifi.listNetworks(function(err, networksArray) {
  if (err) {
    return console.error(err.message);
  }
  console.log(networksArray);
});

// =>
// [{ network_id: 0, ssid: 'MyNetwork', bssid: 'any', flags: '[DISABLED]' },
// { network_id: 1, ssid: 'Skynet', bssid: 'any', flags: '[CURRENT]' }]

restartInterface(callback)

The restartInterface function is used to restart the interface provided

var piWifi = require('pi-wifi');

piWifi.restartInterface('wlan0', function(err) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Interface restarted succesfully!');
});

scan(callback)

The scan function is used to scan available wifi networks

var piWifi = require('pi-wifi');

piWifi.scan(function(err, networks) {
  if (err) {
    return console.error(err.message);
  }
  console.log(networks);
});

// =>
//[ 
//  { bssid: 'aa:bb:cc:dd:ee:ff',
//    frequency: 2462,
//    signalLevel: -40,
//    flags: '[WPA2-PSK-CCMP][WPS][ESS]',
//    ssid: 'MyNetwork' },
//  { bssid: '11:22:33:44:55:66',
//    frequency: 2462,
//    signalLevel: -28,
//    flags: '[WPA2-PSK-CCMP][ESS]',
//    ssid: 'AnotherNetwork' },
//  { bssid: 'aa:11:bb:22:cc:33',
//    frequency: 2462,
//    signalLevel: -33,
//    flags: '[WPA2-EAP-CCMP-preauth][WPS][ESS]',
//    ssid: 'MyEnterpriseNetwork' },
//  { bssid: 'c0:56:27:44:3b:9c',
//    frequency: 2412,
//    signalLevel: -59,
//    flags: '[WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][ESS]',
//    ssid: 'MyGuestsNetwork' 
//  }
//]

setCurrentInterface(iface)

The setCurrentInterface function is used to specify the interface to use as default

var piWifi = require('pi-wifi');
piWifi.setCurrentInterface('wlan1');

piWifi.status('wlan0', function(err, status) {
  if (err) {
    return console.error(err.message);
  }
  console.log(status);
});

startSupplicant(callback)

The startSupplicant function is used to start a wpa_supplicant instance

var piWifi = require('pi-wifi');

piWifi.startSupplicant({iface: 'wlan0', config: '/etc/wpa_supplicant/wpa_supplicant.conf', dns: '/etc/resolv.conf'}, function(err, networks) {
  if (err) {
    return console.error(err.message);
  }
  console.log('Supplicant instance successfully started!');
});

status(iface, callback)

The status function is used to show status parameters of the interface specified, if no interface is provided the selected one is used

var piWifi = require('pi-wifi');

piWifi.status('wlan0', function(err, status) {
  if (err) {
    return console.error(err.message);
  }
  console.log(status);
});

// =>
//{
//  bssid: '2c:f5:d3:02:ea:d9',
//  frequency: 2412,
//  mode: 'station',
//  key_mgmt: 'wpa2-psk',
//  ssid: 'MyNetwork',
//  pairwise_cipher: 'CCMP',
//  group_cipher: 'CCMP',
//  p2p_device_address: 'aa:bb:cc:dd:ee:ff',
//  wpa_state: 'COMPLETED',
//  ip: '10.20.30.40',
//  mac: 'a1:b2:c3:d4:e5:f6',
//  uuid: 'e1cda789-8c88-53e8-ffff-31c304580c22',
//  id: 0
//}

Notes

Tested on Raspberry Pi 3