arm64: dts: DTS for Luckfox Core3566

arch/arm64/boot/dts/rockchip/Makefile

@@ -406,5 +406,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-tablet-rk806-single-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-tablet-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-tablet-v11.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-luckfox-core3566.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += core3566-mipi-dsi0-lp4x-v1-linux.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += core3566-mipi-dsi1-lp4x-v1-linux.dtb
 
 subdir-y := $(dts-dirs) overlay

arch/arm64/boot/dts/rockchip/core3566-base.dtsi

@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 luckfox technology Limited.
+ */
+#include "core3566-luckfox-rk3566.dtsi"
+
+/ {
+	model = "luckfox core3566";
+	compatible = "luckfox,core3566", "rockchip,rk3566";
+
+    leds: leds {
+        compatible = "gpio-leds";
+        work_led: work{
+            gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+            linux,default-trigger = "timer";
+            default-state = "on";
+		};
+	};
+    mcp251x_clk:mcp251x-clk{
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <16000000>;
+    };
+
+    sc16is752_clk:sc16is752-clk{
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-output-names = "sc16is752_clk";
+        clock-frequency = <14745600>;
+                        // 16000000
+    };
+
+
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&display_subsystem {
+    status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	supports-sd;
+	card-detect-delay = <800>;
+	ignore-pm-notify;
+	disable-wp;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+&usbhost_dwc3 {
+	status = "okay";
+};
+
+&usbhost30 {
+	status = "okay";
+};
+
+&combphy1_usq {
+	status = "okay";
+};
+
+&combphy2_psq {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "disabled";
+};
+
+&u2phy1_otg {
+	status = "disabled";
+};
+
+&u2phy1_host {
+	status = "disabled";
+};
+
+&usb_host0_ehci {
+	status = "disabled";
+};
+
+&usb_host0_ohci {
+	status = "disabled";
+};
+
+&usb_host1_ehci {
+	status = "disabled";
+};
+
+&usb_host1_ohci {
+	status = "disabled";
+};
+
+&pinctrl {
+
+};
+
+&gmac1 {
+    phy-mode = "rgmii";
+    clock_in_out = "output";
+
+    snps,reset-gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
+    snps,reset-active-low;
+    /* Reset time is 20ms, 100ms for rtl8211f */
+    snps,reset-delays-us = <0 20000 100000>;
+
+    assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+    assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+    assigned-clock-rates = <0>, <125000000>;
+
+    pinctrl-names = "default";
+    pinctrl-0 = <&gmac1m1_miim
+             &gmac1m1_tx_bus2
+             &gmac1m1_rx_bus2
+             &gmac1m1_rgmii_clk
+             &gmac1m1_rgmii_bus>;
+
+    tx_delay = <0x40>;
+    rx_delay = <0x24>;
+
+    phy-handle = <&rgmii_phy0>;
+    status = "okay";
+};
+
+&mdio1 {
+    rgmii_phy0: phy@0 {
+        compatible = "ethernet-phy-ieee802.3-c22";
+        reg = <0x0>;
+    };
+};
+
+&sdmmc1 {
+    max-frequency = <150000000>;
+    supports-sdio;
+    bus-width = <4>;
+    disable-wp;
+    cap-sd-highspeed;
+    cap-sdio-irq;
+    keep-power-in-suspend;
+    mmc-pwrseq = <&sdio_pwrseq>;
+    non-removable;
+    pinctrl-names = "default";
+    pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+    sd-uhs-sdr104;
+    status = "okay";
+};
+
+&sdio_pwrseq {
+    reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+};
+
+&wireless_wlan {
+    pinctrl-names = "default";
+    pinctrl-0 = <&wifi_host_wake_irq>;
+    WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
+};
+
+&wireless_bluetooth {
+    compatible = "bluetooth-platdata";
+    clocks = <&rk809 1>;
+    clock-names = "ext_clock";
+    //wifi-bt-power-toggle;
+    uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+    pinctrl-names = "default", "rts_gpio";
+    pinctrl-0 = <&uart1m0_rtsn>;
+    pinctrl-1 = <&uart1_gpios>;
+    BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+    BT,wake_gpio     = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+    BT,wake_host_irq = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+    status = "okay";
+};
+
+//PCIe
+&pcie2x1 {
+    reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+    vpcie3v3-supply = <&vcc3v3_sys>;
+    status = "okay";
+};

arch/arm64/boot/dts/rockchip/core3566-hdmi-screen.dtsi

@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 luckfox technology Limited.
+ */
+
+/ {
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,name = "rockchip,hdmi";
+
+		simple-audio-card,cpu {
+				sound-dai = <&i2s0_8ch>;
+		};
+		simple-audio-card,codec {
+				sound-dai = <&hdmi>;
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+	luckfox,hot-plug-detect-invert;
+};
+
+&hdmi_in_vp0 {
+	status = "okay";
+};
+
+&hdmi_in_vp1 {
+	status = "disabled";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&route_hdmi {
+	status = "okay";
+	connect = <&vp0_out_hdmi>;
+};