Update README.md

README.md

@@ -22,9 +22,9 @@ The 3D models for the case are [here](https://github.com/adonno/tagreader/tree/m
 
 There are not too many components to connect, but it does require soldering. You will need the following:
 
-- Solder
-- Soldering iron with a fairly thin tip
-- About 40cm of thin wire, in, preferably, at least 6 different colors.
+- [Solder](https://s.click.aliexpress.com/e/_dT3S62j)
+- [Soldering iron with a fairly thin tip](https://s.click.aliexpress.com/e/_dXaI6nz)
+- [About 40cm of thin wire, in, preferably, at least 6 different colors](https://s.click.aliexpress.com/e/_dZvoYoB)
 
 To flash the reader firmware to your D1 Mini you point ESPHome at [tagreader.yaml](https://github.com/adonno/tagreader/blob/master/tagreader.yaml). If you're new to ESPHome, we recommend that you use the [ESPHome Home Assistant add-on](https://esphome.io/guides/getting_started_hassio.html).