Top cover docs for vz235 / vz330 (#43)

docs/vz330_mellow/top_cover.md

@@ -9,3 +9,48 @@ permalink: /vz330_mellow/top_cover
 ---
 
 # 9. Top cover and doors panels
+
+## Overview
+
+A finished top cover ('Top Hat') looks like this.  
+The green circle marks a cutout in one of the acrylic panels meant for passing the umbilical cord from the hot end to the electronics bay. This will be located at the back of the printer and/or top-hat
+
+![Frame](../assets/images/manual/vz330_mellow/top_cover/top/TopHat_Overview.png)
+
+## Parts
+
+| Part                                  | Quantity | Location                     | Info                          |
+| :------------------------------------ | -------- | :--------------------------- | :---------------------------- |
+| 2020 extrusion (530mm) with two holes | 2        | **Layer**: 2                 | ![2020 530mm]                 |
+| 2020 extrusion (460mm)                | 2        | **Layer**: 2                 | ![2020 460mm]                 |
+| 2020 extrusion (100mm)                | 4        | **Layer**: 2                 | ![2020 100mm]                 |
+| M5 x 25mm                             | 4        | **Layer**: 3<br/> **Box**: 6 |                               |
+| M4 t-nut                              | 12       |                              |                               |
+| M4 x 10mm                             | 8        |                              |                               |
+| M3 t-nut                              | 36       |                              | Use roll-in type if available |
+| M3 x 10mm                             | 36       |                              |                               |
+| 4mm x 50mm pin                        | 2        |                              |                               |
+
+[2020 530mm]: ../assets/images/manual/vz330_mellow/frame/parts/2020_extrusion_530mm.png
+[2020 460mm]: ../assets/images/manual/vz330_mellow/frame/parts/2020_extrusion_460mm.png
+[2020 100mm]: ../assets/images/manual/vz330_mellow/frame/parts/2020_extrusion_100mm.png
+
+## STLs
+
+(in order of appearance)
+
+* (Enclosure/Panel Trim) Trim - Top Cover corner x4.stl
+* (Enclosure/Panel Trim) Trim - centre x16.stl (x8 are used here)
+* (Enclosure/Panel Trim) Trim - Top Cover lower side corner x4.stl
+* (Enclosure/Panel Trim) Top cover front handle x2.stl
+* (Top Hinges) Left top.stl
+* (Top Hinges) Right top.stl
+* (Top Hinges) Left middle.stl
+* (Top Hinges) Right middle.stl
+* (Frame) handle x4.stl (x2 are used here)
+
+## Step 1
+
+|:-|:-|
+| ![Mount](../assets/images/manual/vz330_mellow/top_cover/top/TopHat_Step1.png) | &#8226; Fasten the top frame extrusions with 4x M5 x 25mm bolts |
+{: .instructiontable}

docs/vz330_printed/top_cover.md

@@ -4,8 +4,18 @@ title: 8. Top cover, doors and trims
 parent: Vz330 - Printed Version
 has_toc: false
 nav_order: 8
-has_children: false
+nav_exclude: true
+has_children: true
 permalink: /vz330_printed/top_cover
 ---
 
-TODO
+# 8. Top cover and doors panels
+
+The top cover assembly exists out of three substeps:
+
+1. [Top Cover hinges](./top_cover/hinges_top.md)
+2. [Door & doorhinges](./top_cover/doors.md)
+3. [Doorlatches](./top_cover/latches_door.md)
+
+|:-|
+| ![Overview](../assets/images/manual/vz330_printed/top_cover/) |