Restored PETG and ABS profiles. Lowered outerwall speed to 30mm/s. Re…

…duced gradual flow for PETG and ABS. Added extra parameter to reduce inner wall speeds on top surface.

resources/definitions/ultimaker_s3.def.json

@@ -41,6 +41,7 @@
             0
         ],
         "platform_texture": "UltimakerS3backplate.png",
+        "preferred_material": "ultimaker_pla_blue",
         "preferred_quality_type": "draft",
         "preferred_variant_name": "AA 0.4",
         "supported_actions": [ "DiscoverUM3Action" ],

resources/definitions/ultimaker_s5.def.json

@@ -38,6 +38,7 @@
             -10
         ],
         "platform_texture": "UltimakerS5backplate.png",
+        "preferred_material": "ultimaker_pla_blue",
         "preferred_quality_type": "draft",
         "preferred_variant_buildplate_name": "Glass",
         "preferred_variant_name": "AA 0.4",

resources/definitions/ultimaker_s7.def.json

@@ -32,6 +32,7 @@
             0
         ],
         "platform_texture": "UltimakerS7backplate.png",
+        "preferred_material": "ultimaker_pla_blue",
         "preferred_variant_name": "AA 0.4",
         "quality_definition": "ultimaker_s5",
         "supported_actions": [ "DiscoverUM3Action" ],

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm_visual.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = high
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm_visual.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm_visual.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+speed_infill = 50
+top_bottom_thickness = 1.05
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm_visual.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = fast
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.1mm_engineering.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = normal
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 30
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_quick.inst.cfg

@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+

resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm_visual.inst.cfg

@@ -0,0 +1,24 @@
+[general]
+definition = ultimaker_s3
+name = Visual
+version = 4
+
+[metadata]
+intent_category = visual
+material = ultimaker_petg
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+acceleration_print = 2500
+acceleration_wall_0 = 1000
+inset_direction = inside_out
+jerk_wall_0 = 20
+speed_print = 50
+speed_roofing = =math.ceil(speed_wall*(35/50))
+speed_wall_0 = =math.ceil(speed_wall*(25/50))
+top_bottom_thickness = =max(1.2 , layer_height * 6)
+

resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm_engineering.inst.cfg

@@ -0,0 +1,28 @@
+[general]
+definition = ultimaker_s3
+name = Accurate
+version = 4
+
+[metadata]
+intent_category = engineering
+material = ultimaker_abs
+quality_type = draft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
+infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
+infill_sparse_density = 20
+jerk_print = 30
+speed_infill = =speed_print
+speed_print = 35
+speed_roofing = =speed_topbottom
+speed_topbottom = =speed_print
+speed_wall = =speed_print
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+top_bottom_thickness = =wall_thickness
+wall_thickness = =line_width * 3
+