Update translation-template with bundled engine-plugin settings.

Will need to be handled more elegantly later. Put it here manually for now, so we can at least start the translation process.

resources/i18n/cs_CZ/fdmprinter.def.json.po

@@ -5387,6 +5387,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "cestování"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "machine_head_with_fans_polygon description"
 #~ msgid "A 2D silhouette of the print head (fan caps included)."
 #~ msgstr "2D silueta tiskové hlavy (včetně krytů ventilátoru)."

resources/i18n/de_DE/fdmprinter.def.json.po

@@ -5384,6 +5384,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "Bewegungen"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Versatz, der auf die Löcher in jeder Schicht angewandt wird. Bei positiven Werten werden die Löcher vergrößert; bei negativen Werten werden die Löcher verkleinert."

resources/i18n/es_ES/fdmprinter.def.json.po

@@ -5384,6 +5384,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "desplazamiento"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Cantidad de desplazamiento aplicado a todos los orificios en cada capa. Los valores positivos aumentan el tamaño de los orificios y los valores negativos reducen el tamaño de los mismos."

resources/i18n/fdmprinter.def.json.pot

@@ -5372,3 +5372,46 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr ""
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""

resources/i18n/fi_FI/fdmprinter.def.json.po

@@ -5386,6 +5386,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "siirtoliike"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "machine_head_polygon description"
 #~ msgid "A 2D silhouette of the print head (fan caps excluded)."
 #~ msgstr "2D-siluetti tulostuspäästä (tuulettimen kannattimet pois lukien)"

resources/i18n/fr_FR/fdmprinter.def.json.po

@@ -5384,6 +5384,52 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "déplacement"
 
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "hole_xy_offset description"
 #~ msgid "Amount of offset applied to all holes in each layer. Positive values increase the size of the holes, negative values reduce the size of the holes."
 #~ msgstr "Le décalage appliqué à tous les trous dans chaque couche. Les valeurs positives augmentent la taille des trous ; les valeurs négatives réduisent la taille des trous."

resources/i18n/hu_HU/fdmprinter.def.json.po

@@ -5398,6 +5398,53 @@ msgctxt "travel description"
 msgid "travel"
 msgstr "fej átpozícionálás"
 
+
+
+
+### Settings added by bundled engine backend plugins. Add this manually for now. Should be removed whenever we handle it better.
+
+msgctxt "gradual_flow_enabled label"
+msgid "Gradual flow enabled"
+msgstr ""
+
+msgctxt "gradual_flow_enabled description"
+msgid "Enable gradual flow changes. When enabled, the flow is gradually increased/decreased to the target flow. This is useful for printers with a bowden tube where the flow is not immediately changed when the extruder motor starts\/stops."
+msgstr ""
+
+msgctxt "max_flow_acceleration label"
+msgid "Gradual flow max acceleration"
+msgstr ""
+
+msgctxt "max_flow_acceleration description"
+msgid "Maximum acceleration for gradual flow changes"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration label"
+msgid "Initial layer max flow acceleration"
+msgstr ""
+
+msgctxt "layer_0_max_flow_acceleration description"
+msgid "Minimum speed for gradual flow changes for the first layer"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size label"
+msgid "Gradual flow discretisation step size"
+msgstr ""
+
+msgctxt "gradual_flow_discretisation_step_size description"
+msgid "Duration of each step in the gradual flow change"
+msgstr ""
+
+msgctxt "reset_flow_duration label"
+msgid "Reset flow duration"
+msgstr ""
+
+msgctxt "reset_flow_duration description"
+msgid "For any travel move longer than this value, the material flow is reset to the paths target flow"
+msgstr ""
+
+
+
 #~ msgctxt "machine_head_polygon description"
 #~ msgid "A 2D silhouette of the print head (fan caps excluded)."
 #~ msgstr "A nyomtatófej 2D -s árnyéka (ventillátor nélkül)."