Skip to content

StarsoftAnalysis/ESP8266RTTTLPlus

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

16 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ESP8266RTTTLPlus

An RTTTL-player for ESP8266, with extra features.

Features

RTTTL

RTTTL is the Ring Tone Text Transfer Language developed by Nokia for creating ringtones on mobile phones back in the day.

It's a useful way to write simple tunes to be played by a buzzer or small speaker attached to a microcontroller.

Example: WalkLike:d=4,o=5,b=200:p,8f#,8d#,d#,d#,d#.,c#,f#.,d#,8d#,e,8d#,b4,b4.,a4,8A4,B4

This library is aimed at ESP8266-based boards, and uses PWM to create the tones. It may well work on other Arduino-esque microcontrollers that support PWM.

It interprets the RTTTL specification somewhat freely, adding some new features, but maintaining compatibility with standard RTTTL.

And, of course, the volume control goes all the way up to 11.

Extensions to Nokia standard:

  • Allows the title section to be of any length, instead of limiting it to 10 characters. The title can still only be in ASCII though -- other Unicode characters could confuse the parser.
  • Covers octaves 3-8 instead of just 4-7. The minimum frequency supported by the ESP8266's software-based PWM is 100Hz, which rules out anything lower.
  • Allows any reasonable tempo (instead of the fixed set of tempos defined by Nokia).
  • Note lengths are indicated by denominators, e.g. 4c for a crotchet (or quarter note). The library does not force the denominator to be one of 1, 2, 4, 8, 16, or 32, so you can use any reasonable integer. The main use of this would be to create triplets with, e.g., 3c.
  • Notes can be given in either upper or lower case.
  • White space anywhere in the melody is ignored.
  • Dots are used to extend the duration of a note by half. For example 2a. (a dotted minim) specifies a duration equivalent to three crotchets. Two dots multiply a note's duration by 1.75. Note that the original RTTTL specification requires the dot to be placed at the end of the note, after the octave number, e.g. 2C#6.. Many RTTTL tunes available on the web, and some other RTTTL-parsing libraries, put the dot /before/ the octave number, e.g. 2C#.6. This library accepts dots in either position.
  • The title and default value sections can be empty, so the shortest possible valid melody is ::c.
  • The duration, octave, and beat in the default value section can be given in any order, or left out entirely. 'Default defaults' will be applied if necessary.
  • The parser does its best to make sense of poorly formed notes, and carries on regardless. The resulting tune will play, unless it's completely empty, but even that won't cause an error.

Hardware

The library assumes that you have a passive buzzer attached to a suitable pin of your microcontroller.

There are plenty of examples of suitable circuits on the web, such as this Instructable, or kits such as Brian Lough's alarm clock.

Example

Here's a minimal programme that uses the library.

#include <ESP8266RTTTLPlus.h>
#define BUZZER_PIN D1

void setup (void) {
    e8rtp::setup(BUZZER_PIN, 5, "Georgia on my mind: d=4,o=5,b=120: 8e,2g.,8p,8e,2d.,8p,p,e,a,e,2d.,8c,8d,e,g,b,a,f,f,8e,e,1c");
    e8rtp::start();
}

void loop (void) {
    e8rtp::loop();	// This must be called from your main 'loop()', otherwise nothing will happen.
}   

For other examples, see the examples directory above.

And for a complete project that uses ESP8266RTTTLPlus, see this alarm clock software.

Installation

Download ESP8266RTTTLPlus into your Arduino library directory. It's not available in the Arduino IDE library manager yet, but hopefully it will be soon.

Usage

All the functions in this library are in the e8rtp namespace.

e8rtp::state()

e8rtp::stateEnum e8rtp::state (void);

Returns the current state of the player -- return one of:

State Description
e8rtp::Unready No melody has been loaded by e8rtp::setup().
e8rtp::Ready A melody has been loaded and is ready to play, or it has finished playing.
e8rtp::Playing The tune is playing, and can be stopped or paused A melody has been loaded and is ready to play.
e8rtp::Paused The tune has been paused: call `e8rtp::resume()' to continue playing it.

e8rtp::setup()

void e8rtp:setup (int pin, int volume, char * melody)

Set up the player by specifying the pin that the buzzer is connected to, the initial volume level (0..11), and the character string containing the melody. You don't need to set the pin as an output -- e8rtp::setup() will do that.

Note that the character string must remain static in memory while the melody is being played, because the player uses a pointer to it, rather than copying the melody into its own storage.

Example:

e8rtp::setup(BUZZER_PIN, 5, "Georgia on my mind: d=4,o=5,b=63:8e,2g.,8p,8e,2d.,8p,p,e,a,e,2d.,8c,8d,e,g,b,a,f,f,8e,e,1c");

e8rtp::start()

void e8rtp::start (void)

Start playing the melody from the beginning.

e8rtp::reset()

void e8rtp::reset (void)

Sets the player back to the first note. I'm not really sure what you'd use that for.

e8rtp::stop()

void e8rtp::stop (void)

Stops playing the melody, and resets back to the beginning.

e8rtp::pause()

void e8rtp::pause (void)

Pause the melody, ready to be e8rtp::resume()d later.

e8rtp::resume()

void e8rtp::resume (void)

Continue playing the melody after being e8rtp::pause()d, starting with the next note.

e8rtp::setVolume(int volume)

int e8rtp::setVolume (int volume)

Change the volume at any time after e8rtp::setup() to a value in the range 0 to 11. Returns the valid volume used (i.e, if you try e8rtp::setup(44) it will set the volume to 11 and return 11 to tell you that).

About

An RTTTL-player for ESP8266, with extra features

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages