This is a Home Assistant add-on to support Wi-fi devices running Tuya firmware without going via the Tuya cloud. Using this integration does not stop your devices from sending status to the Tuya cloud, so this should not be seen as a security measure, rather it improves speed and reliability by using local connections, and may unlock some features of your device, or even unlock whole devices, that are not supported by the Tuya cloud API. Currently the focus is mainly on more complex devices, which are not well supported by other similar integrations. Simpler devices like switches and lights can be covered by rospogrigio/localtuya, though some switches are now covered by this integration.
Please note, this component is actively tested with the Goldair GPPH (inverter), GPDH420 (dehumidifier), Kogan SmarterHome 1500W Smart Panel Heater and Kogan SmarterHome Energy Monitoring SmartPlug. Other devices have been added at user request, and may or may not still be actively in use by others.
Note that devices sometimes get firmware upgrades, or incompatible versions are sold under the same model name, so it is possible that the device will not work despite being listed below.
- Goldair heater models beginning with the code GPPH, GCPV, GECO
- Kogan Wi-Fi Convection Panel heaters - KAHTP and KAWFHTP models
- Andersson GSH heater
- Eurom Mon Soleil 300,600,800, 350,601,720 and 300,450,720 Verre heaters
- Eurom Wall Designheat 2000 heater
- Purline Hoti M100 heater
- Wetair WCH-750 heater
- Kogan Flame effect heater - KAWHMFP20BA model
- Nedis convection heater - WIFIHTPL20F models
- Ecostrad Accent iQ heating panels
- Ecostrad iQ Ceramic radiators
- Devola Patio heater
- Betterlife BT1500 IR heater
- ElectriQ 12WMINV
- ElectriQ Airflex 15W
- Tadiran Wind 65/3P
- Fersk Vind 2
- Carson CB PA280
- Kogan 2.6kW portable air conditioner
- Eberg Qubo Q40HD
- Eberg Cooly C35HD
- Star-Light air conditioner
- TroniTechnik Hellnar Klimagerät
-
Garden PAC pool heatpump (also works with Summerwave Si Series)
-
Madimack Elite V3 pool heatpump
-
Madimack(model unknown) pool heatpump (seems to match Fairland IPH45 as well)
-
Remora pool heatpump
-
BWT FI 45 heatpump
-
Poolex Silverline, Q-line and Vertigo heatpumps
-
IPS Pro Pool-Systems Heatpump (seems to match Fairland Inver-X as well)
-
W'eau Pool Heatpump
-
these seem to use a small number of common controllers with minor variations, and many other Pool heatpumps will work using the above configurations. Report issues if there are any differences in presets or other features, or if any of the "unknown" values that are returned as attributes can be figured out.
- Inkbird ITC306A thermostat smartplug
- Inkbird ITC308 thermostat smartplug
- Beca BHP-6000 Room Heat Pump control thermostat
- Beca BHT-6000/8000 Floor Heating thermostat
- Beca BHT-002/3000 Floor Heating thermostat (with external temp sensor)
- Moes BHT-002 thermostat (without external temp sensor)
- Beca BAC-002 thermostat
- Awow/Mi-heat TH213 thermostat (two variants)
- Siswell T29UTW thermostat
- Siswell C16 thermostat (rebadged as Warmme, Klima and others)
- Minco MH-1823D thermostat
- Owon PCT513 thermostat
- Beok TR9B thermostat (rebadged as Vancoo and perhaps others)
- Hysen HY08WE-2 thermostat
- Nashone MTS-700-WB thermostat smartplug
- Jiahong ET-72W thermostat
- Moes MS-103 Temperature and Humidity Switch (partial functions, temperature only)
- Goldair GCPF315 fan
- Anko HEGSM40 fan
- Lexy F501 fan
- Deta fan controller
- Arlec Grid Connect Smart Ceiling Fan (with and without light)
- Stirling FS1-40DC Pedestal fan
- Aspen ASP 200 fan
- TMWF02 fan controller
- Renpho RP-AP001S air purifier
- Poiema One air purifier
- Himox H05 and H06 air purifiers
- Tesla Pro and Mini air purifiers
- Vork VK6067AW air purifier
- Goldair GPDH420 dehumidifier
- ElectriQ CD12PW dehumidifier
- ElectriQ CD12PWv2 dehumidifier
- ElectriQ CD20PRO-LE-V2 dehumidifier
- ElectriQ CD25PRO-LE-V2 dehumidifier
- ElectriQ DESD9LW dehumidifier
- Kogan SmarterHome 7L Desiccant dehumidifier
- JJPro JPD01 dehumidifer
- JJPro JPD02 dehumidifier
- Eesee Adam dehumidifier
- Hyundai Sahara dehumidifier
- AlecoAir D14 Purifying Dehumidifier
- Eanons QT-JS2014 Purifying humidifier
- Wetair WAW-H1210LW humidifier
- Wilfa Haze HU400BC humidifier
- Kogan Glass 1.7L Smart Kettle (not reliably detected)
- SmartMCB SMT006 Energy Meter
- PC321-TY 3 phase Power Clamp meter
- Parkside PLGS 2012 A1 Smart Charger for powertools
-
Generic Smartplug with Energy monitoring (older models) confirmed as working with Kogan and Blitzwolf Single Smartplugs
-
Generic Smartplug with Energy monitoring (newer models) confirmed working with Kogan single smartplug with USB and Rillpac smartplugs
-
Generic Smartplug with more advanced energy monitoring confirmed working with CBE smartplugs
-
Generic Smartplug with some additional encoded schedule info. confirmed working as a simple switch and timer with Kashimura KJ-173
-
Mirabella Genio Smart plug with USB
-
Grid Connect double outlet with Energy Monitoring, Master and Individual switches and Child Lock.
-
DIGOO DG-SP202 dual smartplug with energy monitoring and timers.
-
DIGOO DG-SP01 USB smartplug with night light.
-
Grid Connect double outlet wall socket
-
Woox R4028/DIGOO DG-PS01 3 outlet + USB powerstrip with individual timers.
-
ES01 3 outlet + USB powerstrip with individual timers. Other brands may work with the above configurations
-
MoesHouse Smartplug with RGBW nightlight
-
Logicom Strippy 4 way power strip with USB
-
Simple Switch - a switch only, can be a fallback for many other unsupported devices, to allow just power to be switched on/off.
-
Simple Switch with Timer - a single switch and timer, will probably work for a lot of smart switches that are not covered by the more advanced configs above.
- Generic RGBCW/RGBWW lightbulb (confirmed with Lijun branded bulb, expected to match others also)
- Simple Garage Door
- Simple Blind Controller
- Kogan Garage Door with tilt sensor
- QS-WIFI-C01(BK) Curtain Module
- M027 Curtain Module (sold under several brands, including zemismart, meterk and others)
- Lefant M213 Vacuum Cleaner (also works for Lefant M213S and APOSEN A550)
- Kyvol E30 Vacuum Cleaner
- Orion Grid Connect Smart Lock
- Qoto 03 Smart Water Valve / Sprinkler Controller
- SD123 HPR01 Human Presence Radar
Installation is via the Home Assistant Community Store (HACS), which is the best place to get third-party integrations for Home Assistant. Once you have HACS set up, simply follow the instructions for adding a custom repository and then the integration will be available to install like any other.
You can easily configure your devices using the Integrations configuration UI.
The first stage of configuration is to provide the information needed to connect to the device.
You will need to provide your device's IP address or hostname, device ID and local key; the last two can be found using the instructions below.
(string) (Required) IP or hostname of the device.
(string) (Required) Device ID retrieved as per the instructions below.
(string) (Required) Local key retrieved as per the instructions below.
At the end of this step, an attempt is made to connect to the device and see if it returns any data. For tuya protocol version 3.3 devices, success at this point indicates that all settings you have supplied are correct, but for protocol version 3.1 devices, the local key is only used for sending commands to the device, so if your local key is incorrect the setup will appear to work, and you will not see any problems until you try to control your device. Note that each time you pair the device, the local key changes, so if you obtained the local key using the instructions linked above, then repaired with your manufacturer's app, then the key will have changed already.
The second stage of configuration is to select which device you are connecting. The list of devices offered will be limited to devices which appear to be at least a partial match to the data returned by the device.
(string) (Optional) The type of Tuya device. Select from the available options.
If you pick the wrong type, you will need to delete the device and set it up again.
The final stage is to choose a name for the device in Home Assistant.
If you have multiple devices of the same type, you may want to change the name to make it easier to distinguish them.
(string) (Required) Any unique name for the device. This will be used as the base for the entitiy names in Home Assistant. Although Home Assistant allows you to change the name later, it will only change the name used in the UI, not the name of the entities.
(boolean) (Optional) Additional options
may be available for deprecated entities exposed by the device.
They will be named for the platform type and an optional name for
the entity as a suffix (eg climate, humidifier, lock_child_lock)
Setting them to True will expose the entity in Home Assistant.
It is strongly recommended that you do not enable deprecated entities when setting up a new device. They are only retained for users who set up the device before support was added for the actual entity matching the device, or when a function was misunderstood, and will not be retained forever.
As of 0.18.0, there are no longer any deprecated entities, but they may be reintroduced in future if better representations of existing devices emerge again.
Many Tuya devices will stop responding if unable to connect to the Tuya servers for an extended period. Reportedly, some devices act better offline if DNS as well as TCP connections is blocked.
Goldair GPPH heaters have individual target temperatures for their
Comfort and Eco modes, whereas Home Assistant only supports a single
target temperature. Therefore, when you're in Comfort mode you will
set the Comfort temperature (5-35), and when you're in Eco mode
you will set the Eco temperature (5-21), just like you were using
the heater's own control panel. Bear this in mind when writing
automations that change the operation mode and set a temperature at
the same time: you must change the operation mode before setting the
new target temperature, otherwise you will set the current thermostat
rather than the new one.
When switching to Anti-freeze mode, the heater will set the current
power level to 1 as if you had manually chosen it. When you switch
back to other modes, you will no longer be in Auto and will have to
set it again if this is what you wanted. This could be worked around
in code however it would require storing state that may be cleared if
HA is restarted and due to this unreliability it's probably best that
you just factor it into your automations.
When child lock is enabled, the heater's display will flash with the
child lock symbol ([]) whenever you change something in HA. This can
be confusing because it's the same behaviour as when you try to change
something via the heater's own control panel and the change is
rejected due to being locked, however rest assured that the changes
are taking effect.
When setting the target temperature, different heaters have different behaviour, which you may need to compensate for. From observation, GPPH heaters allow the temperature to reach 3 degrees higher than the set temperature before turning off, and 1 degree lower before turning on again. Kogan Heaters on the other hand turn off when the temperature reaches 1 degree over the targetin LOW mode, and turn on again 3 degrees below the target. To make these heaters act the same in LOW power mode, you need to set the Kogan thermostat 2 degrees higher than the GPPH thermostat. In HIGH power mode however, they seem to act the same as the GPPH heaters.
The Inkbird thermostat switch does not seem to work for setting anything. If you can figure out how to make setting temperatures and presets work, please leave feedback in Issue #19.
Reportedly, Goldair fans can be a bit flaky. If they become unresponsive, give them about 60 seconds to wake up again.
Anko fans mostly work, except setting the speed does not seem to work. If you can figure out how to set the speed through the Tuya protocol for these devices, please leave feedback on Issue #22.
It has been observed after a while that the current and power readings from the switch were returning 0 when there was clearly a load on the switch. After unplugging and replugging, the switch started returning only dps 1 and 2 (switch status and timer). If HomeAssistant is restarted in that state, the switch detection would fail, however as Home Assistant was left running, it continued to work with no readings for the current, power and voltage. I unplugged the switch overnight, and in the morning it was working correctly.
Cumulative Energy readings seem to be reset whenever the reading is successfully sent to the server. This leads to the energy usage never moving from the minimum reporting level of 0.1kWh, which isn't very useful. It may be possible to get useful readings by blocking the switch from accessing the internet, otherwise an integration sensor based on the Power sensor will need to be set up on the Home Assistant side, and the Energy sensor ignored.
Although these look like simple devices, their behaviour is not consistant so they are difficult to detect. Sometimes they are misdetected as a simple switch, other times they only output the temperature sensor so are not detected at all.
These devices support switching between Celcius and Fahrenheit on the control
panel, but do not provide any information over the Tuya local protocol about
which units are selected. Two configurations for this device are provided,
beca_bhp6000_thermostat_c and beca_bhp6000_thermostat_f, please select
the appropriate one for the temperature units you use. If you change the
units on the device control panel, you will need to delete the device from
Home Assistant and set it up again.
These support configuration as either heating or cooling controllers, but only have one output. The HVAC mode is provided as an indicator of which mode they are in, but are set to readonly so that you cannot accidentally switch the thermostat to the wrong mode from HA.
You can find these keys the same way as you would for any Tuya local integration. You'll need the Goldair app or the Tuya Tuya Smart app (the Goldair app is just a rebranded Tuya app), then follow these instructions.
- This component is mosty unit-tested thanks to the upstream project, but there are a few more to complete. Feel free to use existing specs as inspiration and the Sonar Cloud analysis to see where the gaps are.
- Once unit tests are complete, the next task is to complete the Home Assistant quality checklist before considering submission to the HA team for inclusion in standard installations.
- Discovery seems possible with the new tinytuya library, though the steps to get a local key will most likely remain manual. Discovery also returns a productKey, which might help make the device detection more reliable where different devices use the same dps mapping but different names for the presets for example.
Please report any issues and feel free to raise pull requests. Many others have contributed their help already.
