autodoc: Handle apidoc continuation lines #13603
Workflow file for this run
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # | |
| # Run the tests on various build configurations and various operating systems. | |
| # | |
| # In the Perl/perl5 repository all jobs are run by default. | |
| # | |
| # To enable the testing on a fork of the perl5 repository you first need to | |
| # enable GitHub Actions in 'Settings' -> 'Actions' -> 'General'. | |
| # | |
| # When actions are enabled then it will - by default - run the 'Sanity Check' job. | |
| # | |
| # Testing other build configurations is controlled by the 'Secrets' configured | |
| # in 'Settings' -> 'Secrets and Variables' -> 'Actions' -> 'Variables': | |
| # - DO_EXTENDED_TESTING: when this var exists and is set to a true value then | |
| # all build configurations are tested; | |
| # - CI_SKIP_SANITY: if set to a true value then most of the 'Sanity Check' job is skipped; | |
| # - CI_FORCE_LINUX: if set to a true value: run the 'linux' job; | |
| # - CI_FORCE_LINUX_I386: if set to a true value: run the 'linux-i386' job; | |
| # - CI_FORCE_INSTALL: if set to a true value: run the 'install' job; | |
| # - CI_FORCE_MACOS: if set to a true value: run the 'smoke-macos-12' job; | |
| # - CI_FORCE_MSVC142: if set to a true value: run the 'windows-msvc142' job; | |
| # - CI_FORCE_MINGW64: if set to a true value: run the 'mingw64' job; | |
| # - CI_FORCE_CYGWIN: if set to a true value: run the 'cygwin' job; | |
| # - CI_FORCE_MINITEST: if set to a true value: run the 'miniperl' job; | |
| # - CI_FORCE_ASAN: if set to a true value: run the 'ASAN' job; | |
| # - CI_FORCE_PERL_UNICODE: if set to a true value: run the 'PERL_UNICODE' job; | |
| # - CI_FORCE_DIST_MODULES: if set to a true value: run the 'dist-modules' job; | |
| # | |
| # For the purpose of this workflow: | |
| # - 'true value': any value that is not false | |
| # - 'false value': | |
| # * empty string | |
| # * string containing only spaces (i.e. ' ') | |
| # * string containing only zeroes (i.e. '0', '0000') | |
| # * string containing only spaces and zeroes (i.e. '0 0 0 0') | |
| # | |
| # Example: if you only want to run tests on cygwin then you can set: | |
| # - DO_EXTENDED_TESTING=0 | |
| # - CI_SKIP_SANITY=1 | |
| # - CI_FORCE_CYGWIN=1 | |
| # - (and all other CI_FORCE_... vars to 0) | |
| # | |
| name: testsuite | |
| on: | |
| push: | |
| branches: | |
| - "**" | |
| tags-ignore: | |
| - "*" | |
| pull_request: | |
| # I don't think that we can (safely) set TEST_JOBS=2 in the global environment, | |
| # because on Win32 the various Makefile's `test` target is actually ./harness, | |
| # and it would (attempt to) honour the $ENV{TEST_JOBS} setting. This won't end | |
| # nicely as unlike BSD (etc), Win32 sockets can drop data at process exit, which | |
| # would cause missing TAP and hence spurious test failures. | |
| env: | |
| PERL_SKIP_TTY_TEST: 1 | |
| CONTINUOUS_INTEGRATION: 1 | |
| permissions: | |
| contents: read # to fetch code | |
| jobs: | |
| # ___ _ ___ __ _ _ | |
| # / __|_ __ ___| |_____ |_ _|_ _ / _|___ _ _ _ __ __ _| |_(_)___ _ _ ___ | |
| # \__ \ ' \/ _ \ / / -_) | || ' \| _/ _ \ '_| ' \/ _` | _| / _ \ ' \(_-< | |
| # |___/_|_|_\___/_\_\___| |___|_||_|_| \___/_| |_|_|_\__,_|\__|_\___/_||_/__/ | |
| involved_authors_debug: | |
| runs-on: ubuntu-latest | |
| if: ( github.event.pull_request.head.repo.full_name == 'Perl/perl5' || github.repository == 'Perl/perl5' ) && github.base_ref != '' | |
| continue-on-error: true | |
| steps: | |
| - name: Dump GitHub context | |
| env: | |
| GITHUB_CONTEXT: ${{ toJson(github) }} | |
| run: echo "$GITHUB_CONTEXT" | |
| - uses: actions/checkout@v4 | |
| with: | |
| fetch-depth: 1000 | |
| - name: git setup | |
| run: | | |
| echo "Pull request authors" | |
| echo "# git merge-base origin/${BASE_REF} HEAD" | |
| git config diff.renameLimit 999999 | |
| git fetch --depth=1000 origin ${BASE_REF} | |
| env: | |
| BASE_REF: ${{ github.base_ref }} | |
| - name: Involved authors | |
| run: | | |
| echo "Authors from origin/${BASE_REF}..${SHA}^2" | |
| echo "specifically: $(git rev-parse origin/${BASE_REF})..$(git rev-parse ${SHA}^2)" | |
| git log --pretty=format:"Author: %aN <%aE>" origin/${BASE_REF}..${SHA}^2 | sort | uniq -c | |
| env: | |
| BASE_REF: ${{ github.base_ref }} | |
| SHA: ${{ github.sha }} | |
| # ___ _ _ ___ _ _ | |
| # / __| __ _ _ _ (_) |_ _ _ / __| |_ ___ __| |__ | |
| # \__ \/ _` | ' \| | _| || | | (__| ' \/ -_) _| / / | |
| # |___/\__,_|_||_|_|\__|\_, | \___|_||_\___\__|_\_\ | |
| # |__/ | |
| # ascii art small font from https://ascii.co.uk/text | |
| # "sanity_check" tests -Dusethreads without -DDEBUGGING | |
| # "linux-i386" tests -Uusethreads without -DDEBUGGING | |
| # All builds in the "linux" matrix test with -DDEBUGGING | |
| # | |
| # "sanity_check" sets `fetch-depth: 0` so that it does a git clone | |
| # with full history, and hence can run t/porting/cmp_version.t etc | |
| # | |
| # The git-related tests require full history, but we only need to run | |
| # them once (they aren't platform specific). Hence leave the others | |
| # with the default setting (1), which performs a shallow clone. In | |
| # these shallow checkouts, the git related porting tests skip (or | |
| # rapidly pass), but they won't fail spuriously. | |
| # | |
| # TODO - Now that we do not use secrets and instead use vars for the | |
| # control of which tests we run (due to the way secrets are elided | |
| # from the output), we can simplify the shell code below. The | |
| # following url includes discussion on what next steps we could take | |
| # to simplify the complexity of this code. | |
| # | |
| # https://github.com/Perl/perl5/pull/20845#issuecomment-1440676127 | |
| # | |
| sanity_check: | |
| name: "Sanity: Linux -Dusethreads" | |
| runs-on: ubuntu-latest | |
| timeout-minutes: 120 | |
| outputs: | |
| run_all_jobs: ${{ steps.check_extended_testing.outputs.run_all_jobs }} | |
| ci_force_linux: ${{ steps.ci_config.outputs.ci_force_linux }} | |
| ci_force_linux_i386: ${{ steps.ci_config.outputs.ci_force_linux_i386 }} | |
| ci_force_install: ${{ steps.ci_config.outputs.ci_force_install }} | |
| ci_force_macos: ${{ steps.ci_config.outputs.ci_force_macos }} | |
| ci_force_msvc142: ${{ steps.ci_config.outputs.ci_force_msvc142 }} | |
| ci_force_mingw64: ${{ steps.ci_config.outputs.ci_force_mingw64 }} | |
| ci_force_cygwin: ${{ steps.ci_config.outputs.ci_force_cygwin }} | |
| ci_force_minitest: ${{ steps.ci_config.outputs.ci_force_minitest }} | |
| ci_force_asan: ${{ steps.ci_config.outputs.ci_force_asan }} | |
| ci_force_perl_unicode: ${{ steps.ci_config.outputs.ci_force_perl_unicode }} | |
| ci_force_dist_modules: ${{ steps.ci_config.outputs.ci_force_dist_modules }} | |
| steps: | |
| - name: Dump GitHub context | |
| env: | |
| GITHUB_CONTEXT: ${{ toJson(github) }} | |
| run: echo "$GITHUB_CONTEXT" | |
| - name: Check what-to-do | |
| id: ci_config | |
| env: | |
| CI_SKIP_SANITY: ${{ vars.CI_SKIP_SANITY }} | |
| CI_FORCE_LINUX: ${{ vars.CI_FORCE_LINUX }} | |
| CI_FORCE_LINUX_I386: ${{ vars.CI_FORCE_LINUX_I386 }} | |
| CI_FORCE_INSTALL: ${{ vars.CI_FORCE_INSTALL }} | |
| CI_FORCE_MACOS: ${{ vars.CI_FORCE_MACOS }} | |
| CI_FORCE_MSVC142: ${{ vars.CI_FORCE_MSVC142 }} | |
| CI_FORCE_MINGW64: ${{ vars.CI_FORCE_MINGW64 }} | |
| CI_FORCE_CYGWIN: ${{ vars.CI_FORCE_CYGWIN }} | |
| CI_FORCE_MINITEST: ${{ vars.CI_FORCE_MINITEST }} | |
| CI_FORCE_ASAN: ${{ vars.CI_FORCE_ASAN }} | |
| CI_FORCE_PERL_UNICODE: ${{ vars.CI_FORCE_PERL_UNICODE }} | |
| CI_FORCE_DIST_MODULES: ${{ vars.CI_FORCE_DIST_MODULES }} | |
| run: | | |
| echo '::echo::on' | |
| [[ -n "${CI_SKIP_SANITY}" ]] && [[ "${CI_SKIP_SANITY%[!0 ]*}" != "${CI_SKIP_SANITY}" ]] && echo "ci_skip_sanity=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_LINUX}" ]] && [[ "${CI_FORCE_LINUX%[!0 ]*}" != "${CI_FORCE_LINUX}" ]] && echo "ci_force_linux=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_LINUX_I386}" ]] && [[ "${CI_FORCE_LINUX_I386%[!0 ]*}" != "${CI_FORCE_LINUX_I386}" ]] && echo "ci_force_linux_i386=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_INSTALL}" ]] && [[ "${CI_FORCE_INSTALL%[!0 ]*}" != "${CI_FORCE_INSTALL}" ]] && echo "ci_force_install=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_MACOS}" ]] && [[ "${CI_FORCE_MACOS%[!0 ]*}" != "${CI_FORCE_MACOS}" ]] && echo "ci_force_macos=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_MSVC142}" ]] && [[ "${CI_FORCE_MSVC142%[!0 ]*}" != "${CI_FORCE_MSVC142}" ]] && echo "ci_force_msvc142=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_MINGW64}" ]] && [[ "${CI_FORCE_MINGW64%[!0 ]*}" != "${CI_FORCE_MINGW64}" ]] && echo "ci_force_mingw64=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_CYGWIN}" ]] && [[ "${CI_FORCE_CYGWIN%[!0 ]*}" != "${CI_FORCE_CYGWIN}" ]] && echo "ci_force_cygwin=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_MINITEST}" ]] && [[ "${CI_FORCE_MINITEST%[!0 ]*}" != "${CI_FORCE_MINITEST}" ]] && echo "ci_force_minitest=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_ASAN}" ]] && [[ "${CI_FORCE_ASAN%[!0 ]*}" != "${CI_FORCE_ASAN}" ]] && echo "ci_force_asan=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_PERL_UNICODE}" ]] && [[ "${CI_FORCE_PERL_UNICODE%[!0 ]*}" != "${CI_FORCE_PERL_UNICODE}" ]] && echo "ci_force_perl_unicode=true" >> "$GITHUB_OUTPUT" | |
| [[ -n "${CI_FORCE_DIST_MODULES}" ]] && [[ "${CI_FORCE_DIST_MODULES%[!0 ]*}" != "${CI_FORCE_DIST_MODULES}" ]] && echo "ci_force_dist_modules=true" >> "$GITHUB_OUTPUT" | |
| echo '::echo::off' | |
| - name: Install System dependencies | |
| if: steps.ci_config.outputs.ci_skip_sanity != 'true' | |
| run: | | |
| sudo apt-get update | |
| sudo apt-get install -y libgdbm-dev libdb-dev | |
| - uses: actions/checkout@v4 | |
| with: | |
| fetch-depth: 0 | |
| if: steps.ci_config.outputs.ci_skip_sanity != 'true' | |
| - name: git cfg | |
| if: steps.ci_config.outputs.ci_skip_sanity != 'true' | |
| run: | | |
| git config diff.renameLimit 999999 | |
| - name: Configure | |
| if: steps.ci_config.outputs.ci_skip_sanity != 'true' | |
| run: | | |
| ./Configure -des -Dusedevel ${CONFIGURE_ARGS} -Dprefix="$HOME/perl-blead" | |
| env: | |
| CONFIGURE_ARGS: "-Dusethreads" | |
| - name: Build | |
| if: steps.ci_config.outputs.ci_skip_sanity != 'true' | |
| id: build | |
| run: | | |
| make -j2 test_prep | |
| - name: Show Config | |
| if: steps.ci_config.outputs.ci_skip_sanity != 'true' | |
| run: | | |
| ./perl -Ilib -V | |
| ./perl -Ilib -e 'use Config; print Config::config_sh' | |
| - name: Run Tests (excluding t/porting) | |
| if: steps.ci_config.outputs.ci_skip_sanity != 'true' | |
| run: | | |
| TEST_JOBS=2 ./perl t/harness -nre='^porting/' | |
| # Set a variable for dependent jobs to signal if full testsuite is enabled | |
| - name: "Check if DO_EXTENDED_TESTING is set" | |
| id: check_extended_testing | |
| env: | |
| DO_EXTENDED_TESTING: ${{ vars.DO_EXTENDED_TESTING }} | |
| CURRENT_REPOSITORY: ${{ github.repository }} | |
| run: | | |
| if [[ "${CURRENT_REPOSITORY}" = 'Perl/perl5' ]]; then | |
| echo "Running all test jobs" | |
| echo "run_all_jobs=true" >> "$GITHUB_OUTPUT" | |
| elif [[ -n "${DO_EXTENDED_TESTING}" ]] && [[ "${DO_EXTENDED_TESTING%[!0 ]*}" != "${DO_EXTENDED_TESTING}" ]]; then | |
| echo "Running all test jobs" | |
| echo "run_all_jobs=true" >> "$GITHUB_OUTPUT" | |
| else | |
| echo "Skipping extended test jobs." | |
| echo "run_all_jobs=false" >> "$GITHUB_OUTPUT" | |
| fi | |
| - name: Run Porting Tests (t/porting) | |
| if: (! cancelled() && steps.ci_config.outputs.ci_skip_sanity != 'true' && steps.build.outcome == 'success') | |
| run: | | |
| TEST_JOBS=2 ./perl t/harness -re='^porting/' | |
| # _ _ | |
| # | (_)_ _ _ ___ __ | |
| # | | | ' \ || \ \ / | |
| # |_|_|_||_\_,_/_\_\ | |
| linux: | |
| runs-on: ubuntu-latest | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_linux == 'true')) | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| # exercise a variety of build options | |
| # threads often cause build issues | |
| CONFIGURE_ARGS: | |
| - "-Uusethreads" | |
| #- "-Dusethreads" # already tested above by sanity_check | |
| #- "-Duseshrplib -Dusesitecustomize -Duselongdouble" # tested below by install | |
| - "-Duseshrplib -Dusequadmath -Dusecbacktrace -Dusethreads" | |
| - "-Duserelocatableinc" | |
| - "-Dcc='clang'" | |
| - "-Dcc='g++'" | |
| - "-Accflags=-DSILENT_NO_TAINT_SUPPORT" | |
| - "-Accflags=-DNO_TAINT_SUPPORT" | |
| - "-DDEBUGGING -Accflags=-DPERL_RC_STACK" | |
| - "-Uusedl" | |
| steps: | |
| - name: Install System dependencies | |
| run: | | |
| sudo apt-get update | |
| sudo apt-get install -y libgdbm-dev libdb-dev | |
| - uses: actions/checkout@v4 | |
| - name: git cfg | |
| run: | | |
| git config diff.renameLimit 999999 | |
| - name: Configure | |
| run: | | |
| ./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead" -DDEBUGGING | |
| - name: Build | |
| run: | | |
| MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2 test_prep | |
| - name: Show Config | |
| run: | | |
| LD_LIBRARY_PATH=`pwd` ./perl -Ilib -V | |
| LD_LIBRARY_PATH=`pwd` ./perl -Ilib -e 'use Config; print Config::config_sh' | |
| - name: Run Tests | |
| run: | | |
| LD_LIBRARY_PATH=`pwd` MALLOC_PERTURB_=254 MALLOC_CHECK_=3 TEST_JOBS=2 ./perl t/harness | |
| - name: git clean | |
| run: | | |
| git clean -dxf | |
| - name: manicheck | |
| run: | | |
| perl Porting/manicheck --exitstatus | |
| # _ _ _ _____ ___ __ | |
| # | (_)_ __ _ ___ __ (_)___ / ( _ ) / /_ | |
| # | | | '_ \| | | \ \/ /____| | |_ \ / _ \| '_ \ | |
| # | | | | | | |_| |> <_____| |___) | (_) | (_) | | |
| # |_|_|_| |_|\__,_/_/\_\ |_|____/ \___/ \___/ | |
| linux-i386: | |
| name: "linux i386/ubuntu" | |
| runs-on: ubuntu-latest | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_linux_i386 == 'true')) | |
| # https://hub.docker.com/r/i386/ubuntu/ | |
| container: | |
| image: i386/ubuntu:latest | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| CONFIGURE_ARGS: | |
| - "-Dusedevel" | |
| steps: | |
| - name: Install System dependencies | |
| run: | | |
| apt-get update | |
| apt-get install -y build-essential git-core libgdbm-dev libdb-dev | |
| # actions/checkout@v2 and higher don't work in a i386 container: | |
| # the GitHub runner uses `node` that is installed on the host inside the container. | |
| # The host is (likely) running x86_64 and using a binary build for x86_64 inside a | |
| # i386 container just doesn't work. | |
| # Upstream reports: | |
| # - https://github.com/actions/checkout/issues/334#issuecomment-1241306390 | |
| # - https://github.com/actions/runner/issues/2115 | |
| # | |
| # actions/checkout@v1 does work inside a container but that doesn't work | |
| # so well with a shallow clone (`fetch-depth: 1`). It contains a race condition | |
| # and makes it impossible to re-run an older job. | |
| # Upstream report: | |
| # - https://github.com/actions/runner/issues/2357 | |
| - name: Clone repo | |
| env: | |
| GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} | |
| run: | | |
| git config --global --add safe.directory "$GITHUB_WORKSPACE" | |
| git init | |
| git remote add origin "https://$GITHUB_ACTOR:[email protected]/$GITHUB_REPOSITORY" | |
| git config --local gc.auto 0 | |
| git fetch origin --depth=1 "$GITHUB_SHA" | |
| git checkout "$GITHUB_SHA" | |
| - name: git cfg | |
| run: | | |
| git config diff.renameLimit 999999 | |
| - name: Configure | |
| run: | | |
| ./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead" | |
| - name: Build | |
| run: | | |
| MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2 | |
| - name: Show Config | |
| run: | | |
| LD_LIBRARY_PATH=`pwd` ./perl -Ilib -V | |
| LD_LIBRARY_PATH=`pwd` ./perl -Ilib -e 'use Config; print Config::config_sh' | |
| # Leaving this as `make test` so that we test the `test` target on regular | |
| # Linux. | |
| # linux-i386 is just one job (not a matrix) | |
| - name: Run Tests | |
| run: | | |
| MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2 test | |
| # _ _ _ _ _ | |
| # _ __ ___ __ _| | _____ (_)_ __ ___| |_ __ _| | | | |
| # | '_ ` _ \ / _` | |/ / _ \ | | '_ \/ __| __/ _` | | | | |
| # | | | | | | (_| | < __/ | | | | \__ \ || (_| | | | | |
| # |_| |_| |_|\__,_|_|\_\___| |_|_| |_|___/\__\__,_|_|_| | |
| install: | |
| runs-on: ubuntu-latest | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_install == 'true')) | |
| steps: | |
| - name: Install System dependencies | |
| run: | | |
| sudo apt-get update | |
| sudo apt-get install -y libgdbm-dev libdb-dev | |
| - uses: actions/checkout@v4 | |
| - name: git cfg | |
| run: | | |
| git config diff.renameLimit 999999 | |
| - name: Configure | |
| run: | | |
| ./Configure -des -Dusedevel -Duseshrplib -Dusesitecustomize -Duselongdouble -Dprefix="$HOME/perl-blead" -DDEBUGGING | |
| - name: Build | |
| run: | | |
| MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make -j2 | |
| - name: Show Config | |
| run: | | |
| LD_LIBRARY_PATH=`pwd` ./perl -Ilib -V | |
| LD_LIBRARY_PATH=`pwd` ./perl -Ilib -e 'use Config; print Config::config_sh' | |
| - name: Run Tests | |
| run: | | |
| MALLOC_PERTURB_=254 MALLOC_CHECK_=3 TEST_JOBS=2 make -j2 test_harness | |
| - name: Install | |
| run: | | |
| MALLOC_PERTURB_=254 MALLOC_CHECK_=3 TEST_JOBS=2 make -j2 install | |
| # This will only pass if libperl.so and Config.pm are correctly installed: | |
| - name: Show Install | |
| run: | | |
| ./perl -V | |
| # This can't run in parallel | |
| - name: distclean | |
| run: | | |
| MALLOC_PERTURB_=254 MALLOC_CHECK_=3 make distclean | |
| - name: manicheck | |
| run: | | |
| perl Porting/manicheck --exitstatus | |
| # ___ ___ | |
| # _ __ __ _ __ / _ \/ __| | |
| # | ' \/ _` / _| (_) \__ \ | |
| # |_|_|_\__,_\__|\___/|___/ | |
| smoke-macos-12: | |
| name: "macOS (Monterey) 12" | |
| runs-on: macos-12 | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_macos == 'true')) | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| CONFIGURE_ARGS: | |
| - "-Uusethreads" | |
| - "-Duseithreads -Duseshrplib" | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: Configure | |
| run: | | |
| sh ./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }} | |
| - name: Build | |
| run: | | |
| make -j2 test_prep | |
| - name: Show Config | |
| run: | | |
| ./perl -Ilib -V | |
| ./perl -Ilib -e 'use Config; print Config::config_sh' | |
| - name: Run Tests | |
| run: | | |
| TEST_JOBS=2 ./perl t/harness | |
| # _ _ | |
| # __ __ _(_)_ _ __| |_____ __ _____ | |
| # \ V V / | ' \/ _` / _ \ V V (_-< | |
| # \_/\_/|_|_||_\__,_\___/\_/\_//__/ | |
| windows-msvc142: | |
| name: "Windows msvc142" | |
| runs-on: windows-2019 | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_msvc142 == 'true')) | |
| steps: | |
| - run: git config --global core.autocrlf false | |
| - uses: actions/checkout@v4 | |
| #- name: Install clcache | |
| # shell: cmd | |
| # run: | | |
| # curl -L https://github.com/frerich/clcache/releases/download/v4.2.0/clcache.4.2.0.nupkg --output clcache.4.2.0.nupkg | |
| # choco install clcache --source=. | |
| #- name: find home directory | |
| # shell: cmd | |
| # run: | | |
| # set | |
| #- name: C compiler cache | |
| # id: clcache | |
| # uses: actions/cache@v1 | |
| # with: | |
| # path: $HOME\clcache | |
| # key: ${{ runner.os }}-x64 | |
| #- name: Set up Perl build environment | |
| # # pushd "C:\Program Files (x86)\Microsoft Visual Studio\Installer\" | |
| # # for /f "delims=" %%x in ('.\vswhere.exe -latest -property InstallationPath') do set VSPATH=%%x | |
| # # popd | |
| # # call "%VSPATH%\VC\Auxiliary\Build\vcvarsall.bat" x64 | |
| # #run: | | |
| - name: Build | |
| shell: cmd | |
| run: | | |
| call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64 | |
| cd win32 | |
| nmake CCTYPE=MSVC142 CFG=Debug | |
| - name: Show Config | |
| shell: cmd | |
| run: | | |
| .\perl.exe -V | |
| .\perl.exe -e "use Config; print Config::config_sh" | |
| - name: Run Tests | |
| shell: cmd | |
| run: | | |
| call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Auxiliary\Build\vcvarsall.bat" x64 | |
| cd win32 | |
| nmake CCTYPE=MSVC142 CFG=Debug test | |
| # _ __ _ _ | |
| # _ __ ___ (_)_ __ __ ___ __/ /_ | || | | |
| # | '_ ` _ \| | '_ \ / _` \ \ /\ / / '_ \| || |_ | |
| # | | | | | | | | | | (_| |\ V V /| (_) |__ _| | |
| # |_| |_| |_|_|_| |_|\__, | \_/\_/ \___/ |_| | |
| # |___/ | |
| mingw64: | |
| name: "Windows mingw64" | |
| runs-on: windows-2019 | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_mingw64 == 'true')) | |
| steps: | |
| - run: git config --global core.autocrlf false | |
| - uses: actions/checkout@v4 | |
| - name: Install mingw-64 | |
| run: | | |
| mkdir C:\perl_ci && cd C:\perl_ci | |
| curl -L https://github.com/brechtsanders/winlibs_mingw/releases/download/13.1.0-16.0.5-11.0.0-ucrt-r5/winlibs-x86_64-posix-seh-gcc-13.1.0-mingw-w64ucrt-11.0.0-r5.zip -o mingw.zip | |
| $expected_hash = '418E8A0175640E617EC6F6639BCA8D3AEDDB6A108391EAF312D1351D19375958' | |
| $file_hash = (Get-FileHash mingw.zip -Algorithm SHA256).Hash | |
| if ($file_hash -ne $expected_hash) { | |
| throw "Wrong hash. Got ${file_hash}, expected ${expected_hash}" | |
| } | |
| tar -xf mingw.zip && rm mingw.zip | |
| copy mingw64\bin\mingw32-make.exe mingw64\bin\gmake.exe | |
| echo 'C:\perl_ci\mingw64\bin' >> $env:GITHUB_PATH | |
| - name: Host perl -V | |
| run: | | |
| perl -V | |
| - name: gcc --version | |
| run: gcc --version | |
| - name: Build | |
| shell: cmd | |
| run: | | |
| cd win32 | |
| gmake CCHOME=C:\perl_ci\mingw64 CFG=Debug -f GNUMakefile -j2 | |
| - name: Show Config | |
| shell: cmd | |
| run: | | |
| .\perl.exe -V | |
| .\perl.exe -e "use Config; print Config::config_sh" | |
| - name: Run Tests | |
| shell: cmd | |
| run: | | |
| cd win32 | |
| set HARNESS_OPTIONS=j2 | |
| gmake CCHOME=C:\perl_ci\mingw64 CFG=Debug -f GNUMakefile test | |
| # _ | |
| # ___ _ _ __ ___ _(_)_ __ | |
| # / __| | | |/ _` \ \ /\ / / | '_ \ | |
| # | (__| |_| | (_| |\ V V /| | | | | | |
| # \___|\__, |\__, | \_/\_/ |_|_| |_| | |
| # |___/ |___/ | |
| cygwin: | |
| name: "cygwin" | |
| runs-on: windows-2019 | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_cygwin == 'true')) | |
| steps: | |
| # we use Cygwin git, so no need to configure git here. | |
| - name: Set up Cygwin | |
| uses: cygwin/cygwin-install-action@v3 | |
| with: | |
| packages: > | |
| cygwin-devel gcc-core gcc-g++ make w32api-headers binutils libtool | |
| git ccache libgdbm-devel libdb-devel | |
| install-dir: ${{ github.workspace }}\cygwin | |
| - name: Check out using Cygwin git, to ensure correct file permissions | |
| env: | |
| GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }} | |
| PATH: /usr/bin:/bin | |
| SHELLOPTS: igncr | |
| shell: sh | |
| run: | | |
| git config --global core.autocrlf false | |
| mkdir -p ~ | |
| cd ~ | |
| git init work | |
| cd work | |
| git remote add origin "https://$GITHUB_ACTOR:[email protected]/$GITHUB_REPOSITORY" | |
| git config --local gc.auto 0 | |
| git fetch origin --depth=1 "$GITHUB_SHA" | |
| git checkout "$GITHUB_SHA" | |
| - name: Configure | |
| shell: sh | |
| env: | |
| PATH: /usr/bin:/bin | |
| SHELLOPTS: igncr | |
| run: | | |
| cd ~/work | |
| set +e | |
| ./Configure -des -Dusedevel -Doptimize=-g -DDEBUGGING || exit 1 | |
| - name: Build | |
| shell: sh | |
| env: | |
| PATH: /usr/bin:/bin | |
| SHELLOPTS: igncr | |
| run: | | |
| cd ~/work | |
| make -j2 test_prep | |
| - name: Show Config | |
| shell: sh | |
| env: | |
| PATH: /usr/bin:/bin | |
| SHELLOPTS: igncr | |
| run: | | |
| cd ~/work | |
| ./perl -Ilib -V | |
| ./perl -Ilib -e 'use Config; print Config::config_sh' | |
| - name: Run Tests | |
| shell: sh | |
| env: | |
| PATH: /usr/bin:/bin | |
| SHELLOPTS: igncr | |
| # Descend far enough down the cygwin yak warren, and one discovers that | |
| # hints/cygwin.sh sets ldlibpthname=PATH | |
| # Meaning that the Makefile variable LDLIBPTH is "PATH=..." | |
| # Meaning that the command to invoke ./runtests is PATH=... ./perl.exe | |
| # *Not* LD_LIBRARY_PATH or anything conventionally unix-like | |
| # | |
| # Cygwin is the slowest CI test. Breaking the abstractions described | |
| # above/committing this DRY violation means that we avoid needing to | |
| # `make -j2 test` to invoke t/TEST, and avoiding that likely saves us | |
| # about 40 seconds, which is nearly 1% of the total wallclock time for | |
| # complete all CI runs. | |
| run: | | |
| cd ~/work | |
| PATH=`pwd`:.:$PATH TEST_JOBS=2 ./perl.exe t/harness | |
| # _ _ _ _ | |
| # _ __ ___ (_)_ __ (_) |_ ___ ___| |_ | |
| # | '_ ` _ \| | '_ \| | __/ _ \/ __| __| | |
| # | | | | | | | | | | | || __/\__ \ |_ | |
| # |_| |_| |_|_|_| |_|_|\__\___||___/\__| | |
| miniperl: | |
| name: "minitest" | |
| runs-on: ubuntu-latest | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_minitest == 'true')) | |
| outputs: | |
| run_all_jobs: ${{ steps.check_extended_testing.outputs.run_all_jobs }} | |
| steps: | |
| - name: Dump GitHub context | |
| env: | |
| GITHUB_CONTEXT: ${{ toJson(github) }} | |
| run: echo "$GITHUB_CONTEXT" | |
| - name: Install System dependencies | |
| run: | | |
| sudo apt-get update | |
| sudo apt-get install -y libgdbm-dev libdb-dev | |
| - uses: actions/checkout@v4 | |
| - name: git cfg | |
| run: | | |
| git config diff.renameLimit 999999 | |
| - name: manicheck | |
| run: | | |
| perl Porting/manicheck --exitstatus | |
| - name: Configure | |
| run: | | |
| ./Configure -des -Dusedevel -Dprefix="$HOME/perl-blead" | |
| - name: Build | |
| run: | | |
| make -j2 minitest_prep | |
| - name: Show Config | |
| run: | | |
| ./miniperl -Ilib -V | |
| ./miniperl -Ilib -e 'use Config; print Config::config_sh' | |
| - name: Run Tests | |
| run: | | |
| make minitest_notty | |
| # _ ____ _ _ _ | |
| # / \ / ___| / \ | \ | | | |
| # / _ \ \___ \ / _ \ | \| | | |
| # / ___ \ ___) / ___ \| |\ | | |
| # /_/ \_\____/_/ \_\_| \_| | |
| # Life is pain, highness. Anyone who says differently is selling something. | |
| ASAN: | |
| name: "ASAN" | |
| runs-on: ubuntu-latest | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_asan == 'true')) | |
| strategy: | |
| matrix: | |
| # -DPURIFY disables arenas and mallocs everything individually. With | |
| # ASAN or similar it's the real torture test. However, we also need to | |
| # test that the arena code doesn't have any goofs. | |
| CONFIGURE_ARGS: | |
| - "-Accflags=-DPURIFY" | |
| - "-DDEBUGGING" | |
| - "-Dusethreads" | |
| steps: | |
| - name: Install System dependencies | |
| run: | | |
| sudo apt-get update | |
| sudo apt-get install -y libgdbm-dev libdb-dev | |
| - uses: actions/checkout@v4 | |
| - name: git cfg | |
| run: | | |
| git config diff.renameLimit 999999 | |
| - name: Configure | |
| run: | | |
| ./Configure -des -Dusedevel -Dcc="clang -fsanitize=address" -Dld="clang -fsanitize=address" ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead" | |
| - name: Build | |
| run: | | |
| PERL_DESTRUCT_LEVEL=2 make -j2 test_prep | |
| - name: Show Config | |
| run: | | |
| ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -V | |
| ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -e 'use Config; print Config::config_sh' | |
| - name: Run Tests | |
| # LeakSanitizer is disabled because it randomly crashes, see [gh #19189] | |
| run: | | |
| ASAN_OPTIONS=detect_leaks=0 PERL_DESTRUCT_LEVEL=2 TEST_JOBS=2 ./perl t/harness | |
| # ____ _____ ____ _ _ _ _ _ ___ ____ ___ ____ _____ | |
| # | _ \| ____| _ \| | | | | | \ | |_ _/ ___/ _ \| _ \| ____| | |
| # | |_) | _| | |_) | | | | | | \| || | | | | | | | | | _| | |
| # | __/| |___| _ <| |___ | |_| | |\ || | |__| |_| | |_| | |___ | |
| # |_| |_____|_| \_\_____|___\___/|_| \_|___\____\___/|____/|_____| | |
| # |_____| | |
| # To the pain! | |
| PERL_UNICODE: | |
| name: "PERL_UNICODE" | |
| runs-on: ubuntu-latest | |
| timeout-minutes: 120 | |
| needs: sanity_check | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_perl_unicode == 'true')) | |
| strategy: | |
| matrix: | |
| # There are many many combinations we *could* test. These two are likely | |
| # to give the best overview - "basic sanity" and "everything maxed out" | |
| CONFIGURE_ARGS: | |
| - "-Uusethreads" | |
| - "-Dusethreads -Accflags=-DPURIFY -Dcc='gcc -fsanitize=address' -Dld='gcc -fsanitize=address'" | |
| steps: | |
| - name: Install System dependencies | |
| run: | | |
| sudo apt-get update | |
| sudo apt-get install -y libgdbm-dev libdb-dev | |
| - uses: actions/checkout@v4 | |
| - name: git cfg | |
| run: | | |
| git config diff.renameLimit 999999 | |
| - name: Show Locales | |
| run: locale -a | |
| - name: Configure | |
| run: | | |
| ./Configure -des -Dusedevel ${{ matrix.CONFIGURE_ARGS }} -Dprefix="$HOME/perl-blead" | |
| - name: Build | |
| run: | | |
| LC_ALL=en_US.UTF-8 PERL_UNICODE="" PERL_DESTRUCT_LEVEL=2 make -j2 test_prep | |
| - name: Show Config | |
| run: | | |
| ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -V | |
| ASAN_OPTIONS=detect_leaks=0 ./perl -Ilib -e 'use Config; print Config::config_sh' | |
| - name: Run Tests | |
| # LeakSanitizer is disabled because it randomly crashes, see [gh #19189] | |
| run: | | |
| ASAN_OPTIONS=detect_leaks=0 PERL_DESTRUCT_LEVEL=2 LC_ALL=en_US.UTF-8 PERL_UNICODE="" TEST_JOBS=2 ./perl t/harness | |
| # _ _ _ _ _ | |
| # __| (_)___| |_ _ __ ___ ___ __| |_ _| | ___ ___ | |
| # / _` | / __| __|____| '_ ` _ \ / _ \ / _` | | | | |/ _ \/ __| | |
| # | (_| | \__ \ ||_____| | | | | | (_) | (_| | |_| | | __/\__ \ | |
| # \__,_|_|___/\__| |_| |_| |_|\___/ \__,_|\__,_|_|\___||___/ | |
| dist-modules: | |
| name: dist-modules | |
| needs: sanity_check | |
| runs-on: ubuntu-latest | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_dist_modules == 'true')) | |
| env: | |
| # some plugins still needs this to run their tests... | |
| # these don't really matter, but might later | |
| PERL_USE_UNSAFE_INC: 0 | |
| AUTHOR_TESTING: 1 | |
| AUTOMATED_TESTING: 1 | |
| RELEASE_TESTING: 1 | |
| NO_NETWORK_TESTING: 1 | |
| strategy: | |
| fail-fast: false | |
| matrix: | |
| perl-version: | |
| - 'latest' | |
| - '5.24' | |
| - '5.10' | |
| - '5.8' | |
| container: | |
| image: perldocker/perl-tester:${{ matrix.perl-version }} | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: perl -V | |
| run: perl -V | |
| - name: Build and test dist modules | |
| run: | |
| perl Porting/test-dist-modules.pl -continue | |
| dist-modules-sys-macos: | |
| name: "Test dist/ modules on MacOS system perl" | |
| needs: sanity_check | |
| runs-on: macos-12 | |
| if: (! cancelled() && (needs.sanity_check.outputs.run_all_jobs == 'true' || needs.sanity_check.outputs.ci_force_dist_modules == 'true')) | |
| env: | |
| # some plugins still needs this to run their tests... | |
| # these don't really matter, but might later | |
| PERL_USE_UNSAFE_INC: 0 | |
| AUTHOR_TESTING: 1 | |
| AUTOMATED_TESTING: 1 | |
| RELEASE_TESTING: 1 | |
| NO_NETWORK_TESTING: 1 | |
| strategy: | |
| fail-fast: false | |
| steps: | |
| - uses: actions/checkout@v4 | |
| - name: perl -V | |
| run: /usr/bin/perl -V | |
| - name: Build and test dist modules | |
| run: | |
| /usr/bin/perl Porting/test-dist-modules.pl -continue -separate | |