Pyflyby is a set of Python programming productivity tools for Python 2.7 and 3.7+.
- For command-line interaction:
py: command-line multitool
- For IPython interaction:
autoimporter: automatically imports symbols when needed.
- For editing python source code:
tidy-imports: adds missing 'import's, removes unused 'import's, and also reformats import blocks.find-import: prints to stdout how to import a particular symbol.reformat-imports: reformatsimportblockscollect-imports: prints out all the imports in a given set of files.collect-exports: prints out definitions in a given set of modules, in the form of import statements.transform-imports: renames imported modules/functions.
$ pip install pyflyby- This creates an alias for your ipython named py which runs the pyflyby plug internally.
- pyflyby has a dependency on ipython, if it isn't already installed do install it with:
$ pip install ipython$ py
In [1]: re.search("[a-z]+", "....hello...").group(0)
[PYFLYBY] import re
Out[1]: 'hello'
In [2]: chisqprob(arange(5), 2)
[PYFLYBY] from numpy import arange
[PYFLYBY] from scipy.stats import chisqprob
Out[2]: [ 1. 0.6065 0.3679 0.2231 0.1353]To load pyflyby into an existing IPython session as a 1-off:
$ ipython
In [1]: %load_ext pyflybyTo configure IPython/Jupyter Notebook to load pyflyby automatically:
$ py pyflyby.install_in_ipython_config_fileor
$ echo 'c.InteractiveShellApp.extensions.append("pyflyby")' \
>> ~/.ipython/profile_default/ipython_config.py
$ ipython
In [1]: b64decode('aGVsbG8=')
[PYFLYBY] from base64 import b64decode
Out[1]: 'hello'$ py b64decode aGVsbG8=
[PYFLYBY] from base64 import b64decode
[PYFLYBY] b64decode('aGVsbG8=', altchars=None)
'hello'
$ py log2 sys.maxint
[PYFLYBY] from numpy import log2
[PYFLYBY] import sys
[PYFLYBY] log2(9223372036854775807)
63.0
$ py 'plot(cos(arange(30)))'
[PYFLYBY] from numpy import arange
[PYFLYBY] from numpy import cos
[PYFLYBY] from matplotlib.pyplot import plot
[PYFLYBY] plot(cos(arange(30)))
<plot>
$ py 38497631 / 13951446
2.7594007818257693
$ py foo.pyTo use tidy-imports, just specify the filename(s) to tidy.
For example:
$ echo 're.search("[a-z]+", "....hello..."), chisqprob(arange(5), 2)' > foo.py
$ tidy-imports foo.py
--- /tmp/foo.py
+++ /tmp/foo.py
@@ -1 +1,9 @@
+from __future__ import absolute_import, division, with_statement
+
+from numpy import arange
+from scipy.stats import chisqprob
+import re
+
re.search("[a-z]+", "....hello..."), chisqprob(arange(5), 2)
Replace /tmp/foo.py? [y/N]
Create a file named .pyflyby with lines such as
from mypackage.mymodule import MyClass, my_function
import anotherpackage.anothermoduleYou can put this file in your home directory or in the same directory as your
*.py files.
AUTOMATIC IMPORTS - never type "import" again!
This module allows your "known imports" to work automatically in your IPython interactive session without having to type the 'import' statements (and also without having to slow down your Python startup with imports you only use occasionally).
Example:
In [1]: re.search("[a-z]+", "....hello...").group(0)
[PYFLYBY] import re
Out[1]: 'hello'
In [2]: chisqprob(arange(5), 2)
[PYFLYBY] from numpy import arange
[PYFLYBY] from scipy.stats import chisqprob
Out[2]: [ 1. 0.6065 0.3679 0.2231 0.1353]
In [3]: np.sin(arandom(5))
[PYFLYBY] from numpy.random import random as arandom
[PYFLYBY] import numpy as np
Out[3]: [ 0.0282 0.0603 0.4653 0.8371 0.3347]
In [4]: isinstance(42, Number)
[PYFLYBY] from numbers import Number
Out[4]: True
Tab completion works, even on modules that are not yet imported. In the following example, notice that numpy is imported when we need to know its members, and only then:
$ ipython In [1]: nump<TAB> In [1]: numpy In [1]: numpy.arang<TAB> [PYFLYBY] import numpy In [1]: numpy.arange
The IPython "?" magic help (pinfo/pinfo2) automatically imports symbols first if necessary:
$ ipython In [1]: arange? [PYFLYBY] from numpy import arange ... Docstring: arange([start,] stop[, step,], dtype=None) ...
Other IPython magic commands work as well:
$ ipython In [1]: %timeit np.cos(pi) [PYFLYBY] import numpy as np [PYFLYBY] from numpy import pi 100000 loops, best of 3: 2.51 us per loop $ echo 'print arange(4)' > foo.py $ ipython In [1]: %run foo.py [PYFLYBY] from numpy import arange [0 1 2 3]
The automatic importing happens at parse time, before code is executed. The namespace never contains entries for names that are not yet imported.
This method of importing at parse time contrasts with previous implementations of automatic importing that use proxy objects. Those implementations using proxy objects don't work as well, because it is impossible to make proxy objects behave perfectly. For example, instance(x, T) will return the wrong answer if either x or T is a proxy object.
- Tested with:
- Python 2.6, 2.7, 3.7, 3.8
- IPython 0.10, 0.11, 0.12, 0.13, 1.0, 1.2, 2.0, 2.1, 2.2, 2.3, 2.4, 3.0, 3.1, 3.2, 4.0., 7.11 (latest)
- IPython (text console), IPython Notebook, Spyder
Pyflyby uses "import libraries" that tell how to import a given symbol.
An import library file is simply a python source file containing 'import' (or
'from ... import ...') lines. These can be generated automatically with
collect-imports and collect-exports.
Find-imports, tidy-imports, and autoimport consult the database of known
imports to figure out where to get an import. For example, if the
imports database contains:
from numpy import arange, NaN
then when you type the following in IPython:
print(arange(10))
the autoimporter would automatically execute from numpy import arange.
The database can be one file or multiple files. This makes it easy to have project-specific known_imports along with global and per-user defaults.
The PYFLYBY_PATH environment variable specifies which files to read.
This is a colon-separated list of filenames or directory names. The default
is:
PYFLYBY_PATH=/etc/pyflyby:~/.pyflyby:.../.pyflyby
If you set:
PYFLYBY_PATH=/foo1/bar1:/foo2/bar2
then this replaces the default.
You can use a hyphen to include the default in the path. If you set:
PYFLYBY_PATH=/foo1/bar1:-:/foo2/bar2
then this reads /foo1/bar1, then the default locations, then /foo2/bar2.
In $PYFLYBY_PATH, .../.pyflyby (with _three_ dots) means that all ancestor
directories are searched for a member named ".pyflyby".
For example, suppose the following files exist:
/etc/pyflyby/stuff.py /u/quarl/.pyflyby/blah1.py /u/quarl/.pyflyby/more/blah2.py /proj/share/mypythonstuff/.pyflyby /proj/share/mypythonstuff/foo/bar/.pyflyby/baz.py /.pyflyby
Further, suppose:
/projis on a separate file system from/.$HOME=/u/quarl
Then tidy-imports /proj/share/mypythonstuff/foo/bar/quux/zot.py will by
default use the following:
/etc/pyflyby/stuff.py /u/quarl/.pyflyby/blah1.py /u/quarl/.pyflyby/more/blah2.py /proj/share/mypythonstuff/foo/bar/.pyflyby/baz.py /proj/share/mypythonstuff/.pyflyby (a file)
Note
/.pyflybyis not included, because traversal stops at file system boundaries, and in this example,/projis on a different file system than/..pyflyby(in$HOMEor near the target file) can be a file or a directory. If it is a directory, then it is recursively searched for*.pyfiles.- The order usually doesn't matter, but if there are "forget" instructions
(see below), then the order matters. In the default
$PYFLYBY_PATH, .../.pyflyby is placed last so that per-directory configuration can override per-user configuration, which can override systemwide configuration.
Occasionally you may have reason to tell pyflyby to "forget" entries from the database of known imports.
You can put the following in any file reachable from $PYFLYBY_PATH:
__forget_imports__ = ["from numpy import NaN"]
This is useful if you want to use a set of imports maintained by someone else except for a few particular imports.
Entries in $PYFLYBY_PATH are processed left-to-right in the order specified,
so put the files containing these at the end of your $PYFLYBY_PATH. By
default, tidy-imports and friends process /etc/pyflyby, then ~/.pyflyby,
then the per-directory .pyflyby.
Within a certain project you may have a policy to always include certain
imports. For example, maybe you always want to do from __future__ import
division in all files.
You can put the following in any file reachable from $PYFLYBY_PATH:
__mandatory_imports__ = ["from __future__ import division"]
To undo mandatory imports inherited from other .pyflyby files, use
__forget_imports__ (see above).
Sometimes you want every run of tidy-imports to automatically rename an import
to a new name.
You can put the following in any file reachable from $PYFLYBY_PATH:
__canonical_imports__ = {"oldmodule.oldfunction": "newmodule.newfunction"}
This is equivalent to running:
tidy-imports --transform=oldmodule.oldfunction=newmodule.newfunction
When programming in Python, a good software engineering practice is to avoid
using from foopackage import * in production code.
This style is a maintenance nightmare:
- It becomes difficult to figure out where various symbols (functions/classes/etc) come from.
- It's hard to tell what gets shadowed by what.
- When the package changes in trivial ways, your code will be affected. Consider the following example: Suppose
foopackage.pycontainsimport sys, andmyprogram.pycontainsfrom foopackage import *; if some_condition: sys.exit(0). Iffoopackage.pychanges so thatimport sysis removed,myprogram.pyis now broken because it's missingimport sys.
To fix such code, you can run tidy-imports --replace-star-imports to
automatically replace star imports with the specific needed imports.
You can configure Pyflyby on a per-repository basis by using the [tool.pyflyby] section of pyproject.toml files. Pyflyby will look in current working directory and all it's parent until it find a pyproject.toml file from which it will load the defaults.
Most of the long command line flags default values can be configured in this section. Simply use the long form option name by replacing dashes - by underscore _. For long option that have the form --xxx and --no-xxx, you can assign a boolean to xxx. For example:
[tool.pyflyby] add_missing=true from_spaces=7 remove_unused=false
To get a
M-x tidy-importscommand in GNU Emacs, add to your~/.emacs:(load "/path/to/pyflyby/lib/emacs/pyflyby.el")
- Pyflyby.el doesn't yet work with XEmacs; patches welcome.
This plugin was contributed back to the community by the D. E. Shaw group.
Pyflyby is written by Karl Chen <[email protected]>
We love contributions! Before you can contribute, please sign and submit this Contributor License Agreement (CLA). This CLA is in place to protect all users of this project.
Pyflyby is released under a very permissive license, the MIT/X11 license; see LICENSE.txt.
Check version number in lib/python/pyflyby/_version.py, maybe increase it.
Commit and tag if necessary, and push tags/commits.
Optional: Set SOURCE_DATE_EPOCH for reproducible build:
export SOURCE_DATE_EPOCH=$(git show -s --format=%ct HEAD)
Build the SDIST:
python setup.py sdist
Optional Repack the Sdist to make sure the ZIP only contain SOURCE_DATE_EPOCH date using IPython tools:
python ~/dev/ipython/tools/retar.py dist/pyflyby-1.7.8.tar.gz shasum -a 256 dist/*
Optional, redo 4 & 5 to verify checksum is unchanged.
Upload using twine:
twine upload dist/*
Check/update https://github.com/conda-forge/pyflyby-feedstock for new pyflyby release on conda-forge