Spelling on 7.5

reference/7.5/Microsoft.PowerShell.Core/About/about_Arrays.md

@@ -784,7 +784,7 @@ Stopped  AppIDSvc           Application Identity
 
 > [!NOTE]
 > Both `ForEach()` and `Where()` methods are intrinsic members. For more
-> information about intrinsic members, see [about_Instrinsic_Members][08].
+> information about intrinsic members, see [about_Intrinsic_Members][08].
 
 ## Get the members of an array
 

reference/7.5/Microsoft.PowerShell.Core/About/about_For.md

@@ -349,7 +349,7 @@ the new variables `$sortedOriginal` and `$sortedPadded`. Finally, it uses a
 properties:
 
 - **Index** represents the current index in the sorted arrays.
-- **Original** is the item in the sorted array of original filenamess at the
+- **Original** is the item in the sorted array of original filenames at the
   current index.
 - **Padded** is the item in the sorted array of padded filenames at the current
   index.

reference/7.5/Microsoft.PowerShell.Core/About/about_Functions_Argument_Completion.md

@@ -262,7 +262,7 @@ By deriving from `ArgumentCompleterAttribute`, it's possible to create generic
 completers that can be reused, for example:
 
 ```powershell
-[DirectoryCompleter(ContainingFile="pswh.exe", Depth=2)]
+[DirectoryCompleter(ContainingFile="pwsh.exe", Depth=2)]
 
 [DateCompleter(WeekDay='Monday', From="LastYear")]
 

reference/7.5/Microsoft.PowerShell.Core/About/about_Numeric_Literals.md

@@ -324,7 +324,7 @@ Integer type literals are parsed using the following steps:
 
 1. Determine the radix format
    - For binary formats, parse into `[BigInteger]`.
-   - For hexadecimal formats, parse into `[BigInteger]` using special casies to
+   - For hexadecimal formats, parse into `[BigInteger]` using special cases to
      retain original behaviors when the value is in the `[int]` or `[long]`
      range.
    - If neither binary nor hex, parse normally as a `[BigInteger]`.

reference/7.5/Microsoft.PowerShell.Core/About/about_Pwsh.md

@@ -407,7 +407,7 @@ non-Windows platforms results in an error.
 
 ### -Version | -v
 
-Displays the version of this PowerShell exectuable. Additional parameters are ignored.
+Displays the version of this PowerShell executable. Additional parameters are ignored.
 
 ### -WindowStyle | -w
 

reference/7.5/Microsoft.PowerShell.Core/Invoke-Command.md

@@ -1468,7 +1468,7 @@ names and the values are session option values.
 
 > [!NOTE]
 > If you specify a hashtable for **SessionOption**, PowerShell converts the hashtable into a
-> **System.Management.Autiomation.Remoting.PSSessionOption** object. The values for keys specified
+> **System.Management.Automation.Remoting.PSSessionOption** object. The values for keys specified
 > in the hashtable are cast to the matching property of the object. This behaves differently from
 > calling `New-PSSessionOption`. For example, the **System.TimeSpan** values for the timeout
 > properties, like **IdleTimeout**, convert an integer value into ticks instead of milliseconds.

reference/7.5/Microsoft.PowerShell.Management/Split-Path.md

@@ -74,7 +74,7 @@ Split-Path -LiteralPath <String[]> [-Resolve] [-Credential <PSCredential>] [<Com
 The `Split-Path` cmdlet returns only the specified part of a path, such as the parent folder, a
 subfolder, or a filename. It can also get items that are referenced by the split path and tell
 whether the path is relative or absolute. If you split a path without specifying any other
-parameters, `Split-Path` returs the parent part of the path provided.
+parameters, `Split-Path` returns the parent part of the path provided.
 
 The `Split-Path` command returns strings. It doesn't return **FileInfo** or other item objects like
 the `*-Item` commands do.

reference/7.5/Microsoft.PowerShell.Management/Suspend-Service.md

@@ -42,7 +42,7 @@ Suspend-Service [-PassThru] -DisplayName <String[]> [-Include <String[]>] [-Excl
 
 The `Suspend-Service` cmdlet sends a suspend message to the Windows Service Controller for each of
 the specified services. While suspended, the service is still running, but its action is stopped
-until resumed, such as by usingthe `Resume-Service` cmdlet. You can specify the services by their
+until resumed, such as by using the `Resume-Service` cmdlet. You can specify the services by their
 service names or display names, or you can use the **InputObject** parameter to pass a service
 object that represents the services that you want to suspend.
 

reference/7.5/Microsoft.PowerShell.Utility/Invoke-RestMethod.md

@@ -258,7 +258,7 @@ $x
 ### Example 7: Skipping Header Validation
 
 By default, the `Invoke-RestMethod` cmdlet validates the values of well-known headers that have a
-standardards-defined value format. The following example shows how this validation can raise an
+standards-defined value format. The following example shows how this validation can raise an
 error and how you can use the **SkipHeaderValidation** parameter to avoid validating values for
 endpoints that tolerate invalidly formatted values.
 

reference/7.5/Microsoft.PowerShell.Utility/Out-File.md

@@ -141,7 +141,7 @@ the file's content in the PowerShell console.
 ### Example 5: Set file output width for entire scope
 
 This example uses `$PSDefaultParameterValues` to set the `Width` parameter for all invocations of
-`Out-File` and the redirection operartors (`>` and `>>`) to 2000. This ensures that everywhere
+`Out-File` and the redirection operators (`>` and `>>`) to 2000. This ensures that everywhere
 within the current scope that you output table formatted data to file, PowerShell uses a line width
 of 2000 instead of a line width determined by the PowerShell host's console width.
 

reference/7.5/Microsoft.PowerShell.Utility/Update-TypeData.md

@@ -201,7 +201,7 @@ The second command uses the `Update-TypeData` cmdlet to set the default list pro
 **DefaultDisplayPropertySet** parameter to specify the default properties for a list. The selected
 properties include the new **Quarter** script property that was added in a previous example.
 
-The last command gets the currnet date and displays it in a list format again. It only displays the
+The last command gets the current date and displays it in a list format again. It only displays the
 properties defined in the `Update-TypeData` command, instead of the full list of properties.
 
 ### Example 5: Set the property a type displays in wide format
@@ -306,12 +306,12 @@ Storage\Set-StorageFileServer                                PowerShellGet\Test-
 PowerShellGet\Test-ScriptFileInfo                            Storage\Unblock-FileShareAccess
 PowerShellGet\Update-ScriptFileInfo                          PowerShellGet\Update-ScriptFileInfo
 BitsTransfer\Add-BitsFile                                    AppLocker\Get-AppLockerFileInformation
-Microsoft.PowerShell.Utility\Get-FileHash                    Microsoft.PowerShell.PSResourceGet\Get-PSScriptFileInfo        
+Microsoft.PowerShell.Utility\Get-FileHash                    Microsoft.PowerShell.PSResourceGet\Get-PSScriptFileInfo
 Microsoft.PowerShell.Utility\Import-PowerShellDataFile       Microsoft.PowerShell.Security\New-FileCatalog
-Microsoft.PowerShell.Core\New-PSRoleCapabilityFile           Microsoft.PowerShell.PSResourceGet\New-PSScriptFileInfo        
+Microsoft.PowerShell.Core\New-PSRoleCapabilityFile           Microsoft.PowerShell.PSResourceGet\New-PSScriptFileInfo
 Microsoft.PowerShell.Core\New-PSSessionConfigurationFile     Microsoft.PowerShell.Utility\New-TemporaryFile
 Microsoft.PowerShell.Utility\Out-File                        Dism\Set-AppXProvisionedDataFile
-Microsoft.PowerShell.Security\Test-FileCatalog               Microsoft.PowerShell.PSResourceGet\Test-PSScriptFileInfo       
+Microsoft.PowerShell.Security\Test-FileCatalog               Microsoft.PowerShell.PSResourceGet\Test-PSScriptFileInfo
 Microsoft.PowerShell.Core\Test-PSSessionConfigurationFile    Microsoft.PowerShell.Utility\Unblock-File
 Microsoft.PowerShell.PSResourceGet\Update-PSScriptFileInfo   C:\WINDOWS\system32\FileDialogBroker.exe
 C:\WINDOWS\system32\FileHistory.exe                          C:\WINDOWS\system32\forfiles.exe

reference/7.5/Microsoft.WSMan.Management/Disconnect-WSMan.md

@@ -43,7 +43,7 @@ PS C:\> cd WSMan:
 PS WSMan:\> dir
 ```
 
-```Outpue
+```Output
 WSManConfig: Microsoft.WSMan.Management\WSMan::WSMan
 ComputerName                                  Type
 ------------                                  ----